摘要： In order to increase the applicability and commercial potential of perovskite solar cells, simple fabrication of high-photovoltaic-performance flexible perovskite solar cells with excellent moisture stabilities without the use of a glove-box and an antisolvent is required. In this paper, we present a simple fabrication strategy involving introduction of 4-tert-butylpyridine into CH3NH3PbI3 and significantly enhancing 4-tert-butylpyridine morphology-modifying effect via a reduction-active flexible poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) interlayer. Owing to the specific oxidation facilitation by the poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) polymer, a perovskite film with large (~1 μm) and quasi-all-in-one-structured grains can be obtained, which significantly enhance the efficiency and the stability of the perovskite solar cells. Furthermore, the high-efficiency flexible perovskite solar cells fabricated by the simple strategy exhibit excellent moisture resistances owing to the stronger coordination and the outside-covering effect of the hydrophobic 4-tert-butylpyridine. The fabrication can be carried out under ambient air (without glovebox, relative humidity > 40%), which paves the way for wearable device application and commercialization.