研究目的
Investigating the diode parameter variations of CdTe solar cells under low irradiance intensity.
研究成果
The study concludes that diode parameters of CdTe solar cells vary significantly with low irradiance intensity, influenced by recombination mechanisms and carrier contributions. For cells with higher shunt resistance, parameters show a steady increase with decreasing irradiance, while cells with lower shunt resistance exhibit more complex behavior. The findings provide valuable insights for the design and fabrication of CdTe solar cells under low light conditions.
研究不足
The study is limited to CdTe solar cells under low illumination intensity conditions. The accuracy of parameter extraction may be affected by measurement uncertainties, especially at very low irradiance levels (<20 mW/cm2).
1:Experimental Design and Method Selection:
The study employs an analytical approach to extract diode parameters (series resistance, shunt resistance, reverse saturation current density, and ideality factor) from J–V measurements under varying low illumination intensities.
2:Sample Selection and Data Sources:
Two CdTe solar cells (cell #1 and cell #2) with different shunt resistances are used. Data is sourced from experimental J–V curve measurements under controlled low irradiance conditions.
3:List of Experimental Equipment and Materials:
A 3-A solar simulator (Crowntech) and Keithley 2400 are used for J–V curve measurements.
4:Experimental Procedures and Operational Workflow:
The irradiance intensity is varied from 0–100 mW/cm2, divided into small ranges for J–V measurements. Diode parameters are assumed constant within each range and extracted using linear fit methods.
5:Data Analysis Methods:
The extracted parameters are analyzed to understand their variation trends with irradiance intensity, focusing on recombination mechanisms and carrier contributions.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容