研究目的
The primary objective of the study was to apply a set of well-developed image pre-processing protocols and a chemometric model to a consumer-grade miniature frame-based digital camera with 12 narrow bands within VNIR regions to assess the fAPAR of a wide array of low stature vegetation over a relatively large region.
研究成果
The study demonstrates that a narrow-band frame-based UAV imaging system would be ideal for regional vegetation monitoring. With proper pre-flight planning and hardware improvement, the mapping of a narrow-band multispectral UAV system could be comparable to that of a manned aircraft system.
研究不足
The small spatial extent of mosaicked imagery is primarily due to UAV mechanics, such as short flight duration, difficulties in maintaining the flight altitude, aircraft stability, maneuverability in winds and turbulence, and inadequate construction, materials and/or engine breakdown in flight equipment. The low signal-to-noise ratio of these lightweight, off-the-shelf consumer-grade sensors made image geometric rectification extremely challenging.
1:Experimental Design and Method Selection:
Utilized a lightweight, frame-based and narrow-band (10 nm) UAV imaging system to estimate the fAPAR over a relatively large cultivated land area with a variety of low stature vegetation. Applied principal component regression to 12 bands of spectral reflectance data to minimize the collinearity issue and compress the data variation. Stepwise regression was employed to reduce the data dimensionality.
2:Sample Selection and Data Sources:
Conducted on a 251 ha flat cultivated site in southwestern Taiwan with a variety of low stature vegetation.
3:List of Experimental Equipment and Materials:
UAV imaging system (MiniMCA-12), field spectroradiometer (FieldSpec 3, ASD, Inc., CO, USA), GNSS (Trimble GeoXH 3000, Trimble Navigation Limited, CA, USA), ceptometer (AccuPAR LP-80, Decagon Devices, Inc., WA, USA).
4:Experimental Procedures and Operational Workflow:
Flight mission conducted on a clear sky day, image pre-processing included band co-registration, ortho-rectification, vignetting effect correction and removal of atmospheric effects. Field fAPAR measurement was conducted on the same day as the UAV mission.
5:Data Analysis Methods:
Principal component and stepwise regressions were applied to derive independent and variation condensed salient variables.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容