研究目的
This study examined APAP degradation by ultraviolet-C (UV-C) and UV-C irradiation combined with activated sludge (UV/AS) to evaluate potential applications in wastewater treatment.
研究成果
UV and UV/AS systems were evaluated for their efficiencies during the APAP treatment process. Sterilized AS was observed to accelerate the APAP irradiation efficiency, and the addition of HA produced similar results with different AS dosages in the APAP photolysis process. The performance of the UV/AS system was close to and even exceeded the performance of many of the existing photolysis systems.
研究不足
The study found that excessive dosage of both AS and humic acid inhibited APAP photolysis efficiency. The initial APAP concentration exhibited only a nominal effect on the degradation rate.
1:Experimental Design and Method Selection:
The study utilized UV-C irradiation and UV-C irradiation combined with activated sludge (UV/AS) for APAP degradation.
2:Sample Selection and Data Sources:
APAP stock solution was prepared and diluted for experiments. Activated sludge was obtained from a CASS reactor.
3:List of Experimental Equipment and Materials:
UV-C reactor equipped with low-pressure mercury lamps, HPLC for APAP concentration measurement, TOC analyzer for HA content determination.
4:Experimental Procedures and Operational Workflow:
APAP solutions were irradiated under UV-C with varying conditions (initial concentration, exposure surface area, AS activity, dosage of AS and HA).
5:Data Analysis Methods:
APAP concentrations were quantified by HPLC. The Langmuir–Hinshelwood kinetic model and pseudo first-order rate model were used for kinetics analysis.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容