- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Effect of graphene on corrosion resistance of Micro-arc oxidation coatings on 6061/7075 dissimilar laser-MIG hybrid welded joint
摘要： Corrosion behavior of a laser-metal inert gas hybrid (Laser-MIG) welded joint with dissimilar aluminum alloys was investigated. Micro-arc oxidation (MAO) coatings with and without graphenes were prepared on the surface of the welded joint. The effects of graphenes on the structure and corrosion resistance of the MAO coatings were studied. The welded joint was divided into five zones to investigate corrosion inducements in different zones. The heat-affected zone of 7075Al (7-HAZ) was found to be most susceptible to corrosion. Although the substrates in different zones had heterogeneous microstructures and phase compositions, the MAO coatings in different zones displayed relatively uniform surface morphology, structure, and phase composition. The MAO treatment significantly improved the corrosion resistance of welded joints. In addition, ceramic-graphene composite coatings exhibited slightly better corrosion resistance than a simple coating without graphenes due to structural changes in the coating.
关键词： Corrosion resistance,Aluminum,Graphene,Laser-MIG hybrid welding,Micro-arc oxidation
更新于2025-11-21 11:18:25
-
Microstructure and Properties of Graphene Oxide-doped TiO2 Coating on Titanium by Micro Arc Oxidation
摘要： Micro arc oxidation (MAO) coatings doped with graphene oxide (GO) were prepared on pure titanium by adding GO and sodium dodecyl benzene sulfonate (SDBS) into a sodium silicate solution. The as-deposited coatings were comparatively analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The binding forces of the MAO, MAO+GO and MAO+GO+SDBS three coatings were measured by a scratch tester. The mechanical property of the three coatings was analyzed using the nano-indentation technique. The corrosion resistance of the coatings was tested by the electrochemical system in 3.5% NaCl solution. The photocatalytic activity of the prepared samples was evaluated by determining the degradation of methylene blue (MB) solution. The results showed that compared to the MAO coating, the morphologies and phase compositions of MAO+GO and MAO+GO+SDBS composite coatings were significantly different. These two composite coatings all had superior photocatalytic activity. Especially, the MAO+GO composite coating still had enhanced binding force and excellent corrosion resistance. Furthermore, the relationship between the microstructure and the properties of these three MAO coatings was analyzed.
关键词： pure titanium,graphene oxide,micro arc oxidation,properties,microstructure
更新于2025-09-23 15:23:52
-
Efficient Interfacial Solar Steam Generator with Controlled Macromorphology Derived from Flour via “Dough Figurine” Technology
摘要： Poor corrosion and wear resistance of magnesium (Mg) alloys restrict their applications. Herein, corrosion and wear-resistant films are formed upon Mg alloy AZ31 through a micro-arc oxidation (MAO) process in silicate electrolyte in the presence of carbon spheres (CS). Surface morphology, chemical composition, corrosion resistance, hardness, and coefficient of friction (CoF) of the MAO coatings are investigated using field-emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectrometry (FTIR), X-ray diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), electrochemical and hydrogen evolution measurements, automatic micro-hardness testing, and reciprocating tribometer, respectively. Results demonstrate that the surface morphology and hardness of MAO coatings vary with the concentration of CS. The presence of CS results in an increased coating thickness from 8.0 (cid:1) 1.8 to 12.2 (cid:1) 1.8 μm, mean pore size from 0.7 (cid:1) 0.1 to 1.9 (cid:1) 0.1 μm, open porosity of MAO coating from 4.2 (cid:1) 0.4 to 5.6% (cid:1) 1.1%, and coating hardness from 347.0 (cid:1) 59.0 to 853.0 (cid:1) 67.3 Vickers-hardness (HV). Furthermore, CS-modified MAO coatings lead to improved corrosion resistance in comparison with that of the neat MAO counterparts. Moreover, the high hardness and formation of SiC of CS-modified coatings lead to a low and stabilized CoF, which implies an enhanced wear resistance.
关键词： micro-arc oxidation,coatings,corrosion resistance,carbon spheres,magnesium alloys
更新于2025-09-11 14:15:04