- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
All polarization-maintaining passively mode-locked Yb-doped fiber laser: pulse compression using an anomalous polarization-maintaining photonic crystal fiber
摘要： We report the generation of short pulses at 1 μm using an all-polarization-maintaining (PM) fiber configuration. The pulses are provided by an all normal-dispersion Fabry-Perot Yb-doped cavity and are compressed with an anomalous polarization-maintaining photonic crystal fiber (PM PCF). Opposed to standard configurations; here the filtering action is solely performed by the finite bandwidth of the gain medium. The laser generates 8 ps width sech2 profile pulses at 1046.8 nm with a -10 dB bandwidth of 5.9 nm. After compression using the PM PCF, pulses with an FWHM of 3 ps were obtained, limited by the actual value of the available anomalous dispersion. We also report the changes in the output light pulses when both the net-normal dispersion of the cavity and the medium gain length were varied. We found that the lack of a specific filter within the cavity does not deteriorate the performance as compared with previous works.
关键词： dissipative solitons,photonic crystal fibers,fiber laser,polarization maintaining
更新于2025-09-16 10:30:52
-
[IEEE 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - Munich, Germany (2019.6.23-2019.6.27)] 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - Continuum Generation in Higher-Order Modes of Photonic Crystal Fibers
摘要： Low-noise supercontinuum (SC) generation in photonic crystal ?bers (PCFs) can be achieved by using pump pulses of femtosecond (fs) duration and low soliton numbers [1]. The small cores sizes needed to obtain anomalous dispersion for pump wavelengths in the Yb gain band (typically 1030-1070 nm) implies a severe restriction on power for such pump pulses. One possible strategy for power scaling is to pump in higher-order ?ber modes, which can attain the desired dispersion properties in larger cores. This contribution aims to explore the properties of such continua, in particular the conditions necessary to retain a single-mode character of the output.
关键词： nonlinear mode coupling,photonic crystal fibers,higher-order modes,supercontinuum generation
更新于2025-09-16 10:30:52
-
Enhancement of thermal and electro-optical properties of photonic crystal fibers infiltrated with a modified 6CHBT nematic liquid crystal doped with gold nanoparticles
摘要： In this paper we present the obtained experimental results for enhancing the parameters of photonic crystal fibers infiltrated with a modified 6CHBT doped with gold nanoparticles. By admixing a special liquid crystalline material we were able to widen the working temperature range of our samples. Doping our liquid crystal mixture with nanoparticles visibly enhances the thermal and electro-optical properties of the infiltrated photonic crystal fibers. Additionally, the use of a specially designed four microelectrode system allowed to decrease voltage. Thanks to the introduced modifications we noticed a significant reduction of threshold voltages (up to 44%), rise times (up to 30%) and fall times (up to 50%).
关键词： Photonic crystal fibers,Nanoparticles,Liquid crystals
更新于2025-09-16 10:30:52
-
[IEEE 2019 21st International Conference on Transparent Optical Networks (ICTON) - Angers, France (2019.7.9-2019.7.13)] 2019 21st International Conference on Transparent Optical Networks (ICTON) - Recent Advances in Inhibited-Coupling Guiding Hollow-Core Optical Fibers
摘要： In this talk, we report on recent developments on inhibited-coupling guiding hollow-core optical fibers ranging from the understanding of the guidance mechanism to application fields. We show that a deep understanding of the cladding properties of those fibers allow to obtain fibers with optimized properties. In particular, we demonstrate that, by adequately designing and controlling the fiber physical parameters, one can obtain ultralow loss fibers for the ultraviolet, visible and infrared ranges. Additionally, we show that convenient alterations in the fiber cladding can modify the fiber mode loss hierarchy allowing it to act as a mode shaper, and polarization discriminator.
关键词： hollow-core fibers,fiber optics,photonic-crystal fibers
更新于2025-09-12 10:27:22
-
[IEEE 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - Munich, Germany (2019.6.23-2019.6.27)] 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - UV-Grade Silica-Based Photonic Crystal Fibers for Broadband UV Generation over 350–395 nm
摘要： A major challenge in supercontinuum (SC) generation is to overcome the shortcomings of existing fibre-based SC sources in the ultraviolet (UV) wavelength range below 400 nm. There is particular need for broadband sources of UV light in applications such as multi-photon fluorescence microscopy for simultaneous coherent excitation of multiple fluorophores. However, UV generation in conventional silica-core fibres is extremely difficult because of factors such as material absorption, large normal dispersion, glass stability, power handling, and aging, and this has motivated much recent interest in the use of alternative approaches. Although these results show great promise, compatibility with the ubiquitous silica platform remains a problem, and there is thus intense current interest in generating UV-light using modified UV-resistant silica glasses. In this paper, we report the design and fabrication of small-core highly nonlinear UV-grade photonic crystal fiber (PCF) drawn from Heraeus F110 UV-resistant silica glass, and its application to broadband UV generation over 260-400 nm. The few mode PCF is shown in Fig. 1(a) and was designed with: core diameter ~4.24 μm, hole diameter d = 3.5 μm, pitch Λ =3.88 μm, and was designed to support five LP modes in a scalar approximation. The calculated dispersion coefficients and mode profiles are shown in Figs 1(b) and (c). Figure 1(d) and (e) show experimental results pumping with picosecond laser pulses at 355 nm. For a 1m length of the PCF, we observe intermodal four-wave mixing (FWM) peaks with Fig. 1(d) showing a series of spectra as the output power varies from 0.1 – 0.2 mW. The FWM peaks are generated over the range 350-370 nm and the peak positions are in good agreement with calculations based on the fibre modal characteristics. For a longer 3 m fibre length, intermodal FWM is not observed, but rather we see cascaded Raman scattering out to 6th-order over the range 355-395 nm. The UV-emission was observed to have stable 0.3 mW output power without any detrimental photo-darkening. In this paper, we have reported the fabrication of highly nonlinear photonic crystal fiber from UV-grade glass and experimentally demonstrate nonlinear frequency conversion over 350-395 nm by pumping at 355 nm with picosecond laser pulses. These results represent an important step towards efficient UV supercontinuum generation in an all-silica fiber platform.
关键词： nonlinear frequency conversion,broadband UV generation,supercontinuum generation,UV-grade silica-based photonic crystal fibers,UV-resistant silica glass
更新于2025-09-12 10:27:22
-
[IEEE 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - Munich, Germany (2019.6.23-2019.6.27)] 2019 Conference on Lasers and Electro-Optics Europe & European Quantum Electronics Conference (CLEO/Europe-EQEC) - Numerical and Experimental Study on the IR Femtosecond Laser and Phase Mask-Based Grating Inscription in Photonic Crystal Fibers
摘要： Femtosecond pulse laser sources enable the fabrication of fiber Bragg gratings (FBGs) in non-photosensitive fibers, allow for through coating grating inscription when working at infrared (IR) wavelengths and can provide for high temperature stable gratings. Target applications for such gratings include, but are not limited to, optical communications, fiber lasers and fiber sensing. When dealing with such grating inscription method in photonic crystal fibers (PCF) however, the presence of air holes in the fiber cladding impedes the delivery of the femtosecond laser pulse energy to the fiber core, which in its turn significantly affects the index change through non-linear absorption processes in the fiber core [1]. Our research focuses on this issue in view of understanding how the grating writing laser pulses interact with the PCF’s holey structure and of enabling more efficient femtosecond laser-based inscription of FBGs in PCFs. Here we report on the inscription of FBGs in a hexagonal lattice PCF using a femtosecond pulse laser operating at 1030 nm with a phase mask and a short focal length cylindrical lens (f=10 mm) that focuses light to the fiber core [2]. We first looked into the influence of the alignment on laser beam focusing in the cross-section of the PCF by comparing the focusing characteristics to those in standard step-index single mode fiber. As a figure of merit, we used the transverse coupling efficiency (TCE), which is defined as the ratio of the integrated core field intensities simulated (using Lumerical FDTD Solutions?) in the presence and absence of holey cladding. Fig. 1b shows how the TCE changes as the fiber is translated along the X and Y axes in the cross-sectional plane. X=0 and Y=0 corresponds to focused to the center of the core, and negative Y indicates translation of the fiber away from the lens (see Fig. 1a). For a step-index fiber we observe a typically elongated region in which we find optimal coupling with TCE=1 (no air holes) for a beam waist of 2.34 μm and a depth of focus of 15.7 μm. Fig. 1c shows an alignment map for a hexagonal lattice PCF (with structure shown in the inset of Fig. 1d), when light is incident along the ΓK axis of the hexagon. We can identify three distinct regions with a TCE around 0.6. Those appear when the fiber is shifted by around 15 μm and 30 μm further from the lens. This offset indicates that optimal coupling of the grating writing beam to the PCF core requires focusing to the edge of the holey cladding or closer to the silica cladding region of the fiber, rather than to the core center. Fig. 1 a) Fiber translational axes and translation dependence of the transverse coupling efficiency (TCE) for b) step-index fiber and c) PCF. d) Spectra of the IR femtosecond pulse inscribed FBG in the PCF (SEM image in the inset). We then inscribed FBGs in the above mentioned hexagonal lattice PCF with a commercial Yb:KGW ultrafast regenerative amplifier system Pharos 6W (Light Conversion) at 1030 nm and 190 fs duration pulses at a repetition rate of 100 Hz. We used high accuracy alignment stages to find the best coupling position by monitoring the luminescence (around 420 nm) from the Ge-doped core. The reflection and transmission spectra of the inscribed FBG are shown in Fig. 1c. We achieved an almost 4 dB strong FBG in around 4 seconds using a laser power of 450 mW. To the best of our knowledge it is the first time that the difference between regular step-index fibers and PCFs in best focusing conditions for IR femtosecond laser-based FBG writing is studied and that such a FBG is realized in a PCF using a 1030 nm source and a phase mask technique with a short focal length cylindrical lens.
关键词： phase mask,photonic crystal fibers,Femtosecond pulse laser,fiber Bragg gratings,transverse coupling efficiency
更新于2025-09-12 10:27:22
-
Design and Characterization of an Ultra Low Loss, Dispersion-Flattened Slotted Photonic Crystal Fiber for Terahertz Application
摘要： A novel photonic crystal fiber (PCF) based on TOPAS, consisting only rectangular slots is presented and analyzed in this paper. The PCF promises not only an extremely low effective material loss (EML) but also a flattened dispersion over a broad frequency range. The modal characteristics of the proposed fiber have been thoroughly investigated using finite element method. The fiber confirms a low EML of 0.009 to 0.01 cm?1 in the frequency range of 0.77–1.05 THz and a flattened dispersion of 0.22 ± 0.01 ps/THz/cm. Besides, some other significant characteristics like birefringence, single mode operation and confinement loss have also been inspected. The simplicity of the fiber makes it easily realizable using the existing fabrication technologies. Thus it is anticipated that the new fiber has the potential to ensure polarization preserving transmission of terahertz signals and to serve as an efficient medium in the terahertz frequency range.
关键词： dispersion,micro-structured fibers,terahertz,photonic crystal fibers,effective material loss
更新于2025-09-09 09:28:46
-
Infiltrated Photonic Crystal Fibers for Sensing Applications
摘要： Photonic crystal ?bers (PCFs) are a special class of optical ?bers with a periodic arrangement of microstructured holes located in the ?ber’s cladding. Light con?nement is achieved by means of either index-guiding, or the photonic bandgap effect in a low-index core. Ever since PCFs were ?rst demonstrated in 1995, their special characteristics, such as potentially high birefringence, very small or high nonlinearity, low propagation losses, and controllable dispersion parameters, have rendered them unique for many applications, such as sensors, high-power pulse transmission, and biomedical studies. When the holes of PCFs are ?lled with solids, liquids or gases, unprecedented opportunities for applications emerge. These include, but are not limited in, supercontinuum generation, propulsion of atoms through a hollow ?ber core, ?ber-loaded Bose–Einstein condensates, as well as enhanced sensing and measurement devices. For this reason, in?ltrated PCF have been the focus of intensive research in recent years. In this review, the fundamentals and fabrication of PCF in?ltrated with different materials are discussed. In addition, potential applications of in?ltrated PCF sensors are reviewed, identifying the challenges and limitations to scale up and commercialize this novel technology.
关键词： optical fiber sensors,photonic crystal fibers,optofluidics,plasmonic sensors,liquid crystals
更新于2025-09-09 09:28:46
-
A Double-Cladding Single Polarization Photonic Crystal Fiber and Its Structure Deviation Tolerance
摘要： We propose a novel broadband single-polarization single-mode photonic crystal fiber (SPSM-PCF) with hexagonally latticed circular airholes. Combined with our fabricated polarization maintaining fiber, it has demonstrated that the enlarged air holes in the outmost layer are superior for the confinement loss reduction. At the optimized parameters, the wavelength of SPSM region is ranging from 1.52 μm to 2.13 μm, where only y-polarized fundamental mode exists and the confinement loss is 0.051 dB/km at 1.55 μm. The influence of realistic fabrication errors involving structure deviation on SPSM operation has also been systematically investigated.
关键词： fiber properties.,Fiber design and fabrication,photonic crystal fibers,single-polarization single mode
更新于2025-09-09 09:28:46