- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
A systematic approach to ZnO nanoparticle-assisted electron transport bilayer for high efficiency and stable perovskite solar cells
摘要： Minimizing the interface loss of perovskite solar cells is critical to achieving high photovoltaic performance, and intensive research is underway on interfacial engineering in this regard. In this work, we introduce a ZnO nanoparticles (ZnO NPs) interlayer between phenyl-C61-butyric acid methyl ester (PCBM) and a metal electrode in order to reduce the interface loss due to charge recombination and device degradation, and also investigate the dependence of device performance on the thickness and morphology of the PCBM and PCBM/ZnO electron transport bilayer. After achieving optimized PCBM and ZnO thickness, the PCBM/ZnO bilayer-based devices reached an average power conversion efficiency of 15.63% (Max. 16.39%) with an open circuit voltage of 1.05 V, short circuit current density of 18.69 mA cm-2, and fill factor of 79.95%. In addition, hysteresis behavior and atmospheric stability are significantly improved by the incorporation of a PCBM/ZnO bilayer. Therefore, the implementation of a PCBM/ZnO electron transport bilayer is a promising approach toward achieving a high-efficiency PSC with stable power output (low J-V hysteresis) and durability.
关键词： ZnO nanoparticles,interfacial engineering,stable perovskite solar cells,interface loss,high-efficiency perovskite solar cells,electron transport bilayer
更新于2025-11-19 16:46:39
-
Latent tracks and novel infrared waveguide formation in lithium tantalate irradiated with swift heavy ions
摘要： In this work, the formation mechanisms of latent ion tracks and infrared-light waveguides in ion-irradiated LiTaO3 single crystals were comparatively studied using 200 MeV Kr17+ irradiation at a fluence of 1 × 1012 cm?2 and 247 MeV Ar12+ irradiation at fluences of 1 × 1012 cm?2 and 3 × 1012 cm?2. Because of the intense electronic energy loss, the produced lattice disorder and formed latent track were experimentally determined through complementary techniques, including the analysis of transmission electron microscopy patterns and Rutherford backscattering/channeling spectra. Corresponding to different ions with different irradiation energies and electronic energy losses, the related spatio-temporal evolutions of lattice temperatures in Kr17+- and Ar12+-irradiated LiTaO3 crystals were numerically calculated using the inelastic thermal spike model. The simulation results theoretically describe the experimentally observed lattice disorder and latent track behaviors. The lattice swelling in the latent-ion-track regions was demonstrated using high-resolution x-ray diffraction patterns; the lattice swelling resulted in a decrease in the refractive index, thereby providing a path to tailor the optical properties and fabricate the waveguide structure. Optical measurements and simulations indicated that the formed LiTaO3 waveguide could effectively support the guided modes and confine the light propagation, especially in the infrared region.
关键词： swift heavy ion irradiation,latent ion track,electronic energy loss,infrared waveguide
更新于2025-11-14 17:04:02
-
[IEEE 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC) - Waikoloa Village, HI, USA (2018.6.10-2018.6.15)] 2018 IEEE 7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC & 34th EU PVSEC) - Prediction and validation of solar cell-to-module and environmental losses based on refractive index data for various encapsulation materials
摘要： Updated complex refractive index data (n and (cid:2)(cid:3)(cid:4) are compiled for various commercial and research solar module encapsulants. The data are used as inputs to ray-tracing simulations to predict CTM loss for standard screen print solar modules and compared to calculations of CTM loss from actual IV and EQE measurements made at the cell and module levels. It is found that this method results in adequate predictions, with important encapsulant (cid:5)(cid:6)(cid:7)(cid:8)(cid:7)(cid:5)(cid:9)(cid:10)(cid:8)(cid:11)(cid:12)(cid:9)(cid:11)(cid:5)(cid:4)(cid:13)(cid:14)(cid:8)(cid:4)(cid:15)(cid:11)(cid:16)(cid:11)(cid:15)(cid:11)(cid:17)(cid:11)(cid:16)(cid:18)(cid:4)(cid:19)(cid:20)(cid:21)(cid:4)(cid:5)(cid:22)(cid:8)(cid:8)(cid:10)(cid:16)(cid:9)(cid:4)(cid:23)(cid:14)(cid:12)(cid:12)(cid:24)(cid:4)(cid:4)(cid:20)(cid:6)(cid:10)(cid:4)(cid:16)(cid:4)(cid:7)(cid:16)(cid:25)(cid:4)(cid:2)(cid:4)(cid:7)(cid:8)(cid:10)(cid:4) also used to predict CTM current loss following damp-heat cycling of modules.
关键词： solar module,CTM loss,encapsulant,ray-tracing,refractive index
更新于2025-10-22 19:40:53
-
[IEEE 2018 25th IEEE International Conference on Image Processing (ICIP) - Athens, Greece (2018.10.7-2018.10.10)] 2018 25th IEEE International Conference on Image Processing (ICIP) - High-Quality Virtual View Synthesis for Light Field Cameras Using Multi-Loss Convolutional Neural Networks
摘要： Although light field cameras record both spatial and angular information, their angular and spatial resolutions are limited when capturing light field data. Thus, it is required to synthesize virtual views. In this paper, we propose high-quality virtual view synthesis based on multi-loss convolutional neural networks (CNN). We adopt multi-loss function for view synthesis in both pixel and feature spaces to increase the angular resolution of light field data. We combine three losses of feature loss, edge loss, and mean squared error (MSE) loss into the multi-loss function. We learn the view synthesis function based on simple three layers of CNN. Experimental results show that the proposed method successfully produces virtual views from light field data and outperforms state-of-the-arts in terms of peak-signal-to-noise ratio (PSNR) and structural similarity (SSIM).
关键词： Convolutional neural networks,loss function,virtual view synthesis,multi-loss,light field
更新于2025-09-23 15:23:52
-
Design and characterization of the double-layered defected ground structure transmission line with less radiation loss
摘要： A double-layered DGS transmission line is proposed with a smaller DGS size and less radiation loss. Changing the air boundary to a dielectric boundary reduces the effective electric length at the DGS aperture area. An equivalent circuit model is introduced to analyze the DGS transmission line and the resonator circuit designs. Due to the increase in the effective dielectric constant, the proposed structure can be realized with less sensitivity to metallic environments. From the experimental results, the proposed double-layered DGS can achieve a reduction of 90.1% in size and insensitivity at up to 5 mm of separation from the DGS aperture to the metallic plate.
关键词： equivalent circuit models,effective dielectric constants,radiation loss,size reduction,defected ground structures
更新于2025-09-23 15:23:52
-
[IEEE 2018 IEEE Asia-Pacific Conference on Antennas and Propagation (APCAP) - Auckland (2018.8.5-2018.8.8)] 2018 IEEE Asia-Pacific Conference on Antennas and Propagation (APCAP) - Development of a 6-18GHz Quad-Ridged Flared Horn
摘要： In this paper, the cutoff frequency of the quad-ridge flared horn (QRFH) with respect to its ridge is studied. Based on the studies, we developed a QRFH to operate from 6 GHz to 18 GHz with high efficiency. The test results show that the return loss is less than -10 dB across the whole band. When the QRFH is used to illuminate a reflector antenna, the aperture efficiency is above 55.8%.
关键词： Low return loss,Cutoff frequency,Quad-ridge flared horn,High efficiency,Wideband
更新于2025-09-23 15:23:52
-
The description of quantum dielectric function for insulators over Bethe surface
摘要： A new expression for the dielectric function is suggested here, which is the Mermin–Belkacem-Sigmund (MBS) model derived from the Belkacem–Sigmund (BS) model based on the conservation of a local particle number in the Mermin model. The energy loss function expressions are reviewed analytically for both models, and these dielectric functions were used to calculate the Bethe sum rule, the energy loss function (ELF), as well as the differential inelastic inverse mean free path (DIIMP) for H2O. The indication from the results is that, compared to the BS dielectric function, the MBS dielectric function is more compatible in its consistency with the exact Bethe sum rule. The ELF for the MBS type is compatible relatively in high and low momentum transfers, while the ELF for the BS type is suitable for high-k. The two models of ELF were also applied to evaluate DIIMP for electron kinetic energy 1 keV, and these were compared with the results predicted in several ways via the SESINIPAC program, using the Mermin dielectric function and the extended Drude and Monte–Carlo method. These predicted results are in reasonable agreement with those estimated from other methods at the range of energy transfer (0–50) eV.
关键词： Bethe surface,differential inelastic inverse mean free path,local particle number,Energy loss function,dielectric function
更新于2025-09-23 15:23:52
-
Design of Cross-Shaped CPW-Fed Ultrawideband Slot Antenna
摘要： A new design of ultrawideband (UWB) antenna of coplanar waveguide (CPW)-fed is proposed. The antenna is composed of a cross-shaped patch and house-shaped slot with the minimum dimension of 21 mm × 20 mm × 1.6 mm. The analysis of S11, VSWR, radiation pattern and surface current is discussed with HFSS simulation software, and also the effect of parameters is presented. Experimental results show that the bandwidth of the antenna covers 110.67% (3.3—11.6 GHz) of UWB range with return loss better than 10 dB. And the good impedance matching in frequency band confirms the antenna is a good candidate for the application of wireless system.
关键词： return loss,ultrawideband (UWB),coplanar waveguide,HFSS
更新于2025-09-23 15:23:52
-
Electron energy-loss spectroscopy (EELS) with a cold-field emission scanning electron microscope at low accelerating voltage in transmission mode
摘要： A commercial electron energy-loss spectrometer (EELS) attached to a high-resolution cold-field emission scanning electron microscope in transmission mode (STEM) is evaluated and its potential for characterizing materials science thin specimens at low accelerating voltage is reviewed. Despite the increased beam radiation damage at SEM voltages on sensitive compounds, we describe some potential applications which benefit from lowering the primary electrons voltage on less-sensitive specimens. We report bandgap measurements on several dielectrics which were facilitated by the lack of Cherenkov radiation losses at 30 kV. The possibility of volume plasmon imaging to probe local composition changes in complex materials was demonstrated using energy-filtered STEM, either via spectrum imaging or elemental mapping using the 'three-windows' method. As plasmonic materials are increasing used for energy, electronics or biomedical applications, the ability of reliably evaluate their properties at low accelerating voltage in a SEM is very appealing and is demonstrated. The energy resolution of the spectrometer, taken as the full width at half maximum of the zero-loss peak, was routinely measured at around 0.55 eV and it is demonstrated that t/λ ratios up to 1.5 allowed practical EEL spectroscopy at 30 kV.
关键词： Damage,Plasmon resonance,Silver,STEM,Lithium,Zero-loss,Bandgap
更新于2025-09-23 15:23:52
-
Cobalt doping-induced strong electromagnetic wave absorption in SiC nanowires
摘要： Understanding the electronic structure-property relationship in doped systems is a prerequisite to designing functional materials. We fabricated Co-doped SiC nanowires with different Co contents by a facile carbothermal reduction approach. The nanowires were characterized in terms of microstructure, electronic structure, and electromagnetic (EM) parameters to uncover the effect of Co dopants on enhancing the EM wave absorption ability. Microstructure analysis and density functional theory calculations verified that the doped Co species inhibited the formation of stacking faults and point defects and increased the conductivity of Co-doped SiC nanowires, which indicated the dominant role of conductivity in enhancing dielectric loss. The Co dopants also imparted the Co-doped SiC nanowires with distinct room-temperature ferromagnetic property, which led to enhanced magnetic loss and impedance matching. The induced synergism among SiC nanowires and Co dopants endowed Co-doped SiC nanowires with strong EM wave absorption ability. The minimum reflection loss of Co-doped SiC nanowires reaches (cid:1)50 dB, and the effective absorption bandwidth is 4.0 GHz with only 1.5 mm sample thickness. Thus, Co-doped SiC nanowires can be used as effective EM wave absorption materials. This study also provided a guideline for designing high-performance EM wave absorbers.
关键词： Dielectric loss,Doping,Density functional theory calculations,Electromagnetic wave absorption,Magnetic property
更新于2025-09-23 15:23:52