- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
[IEEE 2019 International Energy and Sustainability Conference (IESC) - Farmingdale, NY, USA (2019.10.17-2019.10.18)] 2019 International Energy and Sustainability Conference (IESC) - Metal oxide-based heterojunction thin films for solar cell applications
摘要： The interest and development in a fully green future towards sustainable technology and environmental preservation has spurred exponentially for the past few years. The adoption in clean energy is underway with solar photovoltaic (PV) technology leading the race. To keep PV sector competitive with current conventionally generated electricity, an alternative economic PV module using cheap materials with low-cost deposition method is needed. Among the candidate, metal oxides (MO) semiconductors are great potential materials to achieve this goal due to its massive availability, non-toxicity, chemically stable, and can be deposited using low-cost techniques at ambient condition. In this report, the p-n junction solar cell was fabricated using layer by layer deposition of n-type and p-type metal oxide semiconductors. Co3O4 and CuO were used as absorbing layers and ZnO as a window layer in contact with each other using simple spin coating deposition method. Photocurrent density (JSC), photo voltage (VOC) and the crystallinity of materials were investigated to characterize their optoelectronic properties. It is observed that Co3O4 shows larger crystallite size compared to CuO at 26.66 nm and 24.86 nm, respectively. Samples consisting of Co3O4 and CuO p-n junction solar cell exhibits high absorbance in the visible spectral region of 350 nm to 750 nm. J-V measurement of FTO/ZnO/Co3O4/In heterojunction films exhibits short-circuit current density of 0.391 mA/cm-1 and open-circuit voltage of 0.476 V under the illumination of AM1.5 solar simulation (100mW/cm2). Meanwhile, FTO/ZnO/CuO/In shows short-circuit current density of 0.429 mA/cm-1 and open-circuit voltage of 0.048 V. Thus, it shows that green materials without any environmental issue has high potential in solar cells application.
关键词： CuO,Co3O4,Sol-Gel,Solar Cell,Spin Coating,Heterojunction
更新于2025-09-23 15:21:01
-
[IEEE 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC) - Chicago, IL, USA (2019.6.16-2019.6.21)] 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC) - Alleviating performance and cost constraints in silicon heterojunction cells with HJT 2.0
摘要： When considering silicon heterojunction technology (HJT) for mass production the most frequently expressed reservations are related to the performance and cost constraints the standard TCO on the cell front side namely thin indium tin oxide (ITO) constitutes. We address these concerns with our HJT 2.0 concept in which the front electrode is made of a bi-layer of ITO that is supplemented by a silicon nitride (SiN) layer. This cell concept was developed to yield an increase in efficiency of typically 0.2% absolute due to improved cell current and a cost saving in the range of 30-40% with respect to cost of ownership (CoO).
关键词： solar cell efficiency,silicon heterojunction technology,cost saving,silicon nitride,indium tin oxide,HJT 2.0
更新于2025-09-23 15:21:01
-
[IEEE 2019 12th International Conference on Developments in eSystems Engineering (DeSE) - Kazan, Russia (2019.10.7-2019.10.10)] 2019 12th International Conference on Developments in eSystems Engineering (DeSE) - The Effects of Al-Doped ZnO Layer on the Performance of Organic Solar Cell
摘要： The interface properties as well as the solar cell properties of inverted organic solar cells based on PCDTBT:PCBM blends were investigated using sol-gel aluminum doped ZnO as electron transport layers. The effects of Al concentration on the optical, structural and morphological properties of AZO layer were investigated. The results indicate that Al concentration has influenced the grain size growth leading to different surface morphology. High doping concentration resulted in higher charge carrier density and wider band gap. Using AZO layers in organic solar cell has increased their performance; the best performance was observed for the device with 0.5% Al-doped ZnO layer with efficiency of 3.24%, short circuit current density of 8.82mA.cm-2, fill factor of 0.46% and open circuit voltage of 0.81V, whereas the reference device has exhibited an efficiency of 2.9%, short circuit current density of 7.6mA.cm-2, fill factor of 0.48 % and open circuit voltage of 0.785V.
关键词： Electron Transport layer,PCDTBT:PCBM,Organic solar cell,AZO thin films
更新于2025-09-23 15:21:01
-
[IEEE 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC) - Chicago, IL, USA (2019.6.16-2019.6.21)] 2019 IEEE 46th Photovoltaic Specialists Conference (PVSC) - Room Temperature Synthesis of Lead-Free Sn/Ge-Based Perovskite Quantum Dots
摘要： Metal halide perovskites have received remarkable attention as photovoltaic (PV) devices. These have already achieved power conversion efficiency higher than 23% rivaling that of silicon-based PV. However, these outstanding efficiencies can only be acquired with lead-based perovskites and the devices are chemically unstable in air and moisture. Therefore, the key to the widespread deployment of perovskite-based solar cell will come down to address their “toxicity” and instability problems. We have taken the challenge to replace lead with other nontoxic or less toxic elements, e.g., Sn, and Ge. We have synthesized Cs(Sn,Ge)X3 (X=I, Br, and Cl) quantum dots (QDs) using room temperature process. The XRD data showed that the synthesized QDs were yellow hexagonal phase, which was further confirmed by the hexagonal shape of the TEM images of the crystals.
关键词： solar cell,nanoparticle,photoluminescence,doping,Lead-free perovskite
更新于2025-09-23 15:21:01
-
Potassium Doping Effect on the Photovoltaic Performance of Perovskite Solar Cells
摘要： We have fabricated a series of potassium-doped (K-doped) perovskite solar cells (PSCs). Structural investigations of the developed PSCs have shown that alkai doping affects the perovskite layer structure and morphology with the increase of the crystallite size and surface uniformity. K-doped samples exhibite higher photovoltaic (PV) performance and improved operational stability compared to the control series of undoped PSCs, due to retarded recombination processes.
关键词： solar cell,perovskite,doping
更新于2025-09-23 15:21:01
-
[IEEE 2019 14th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA) - Shijiazhuang, China (2019.11.1-2019.11.4)] 2019 14th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA) - A Simplified Model for Thermal Stress Analyses of Bi-Layers With Extreme Dissimilar Thermal Properties in Solar Cell
摘要： This paper aims at developing a simplified analytical model, as verified by the Hilbert-Riemann theoretical solution of interfacial cracks, to study the thermal stress distributions in solar cell laminated structures under thermal loadings. The interface thermal failure problem is analyzed in terms of the packaging materials and solar cell materials of simulated models, maximum interfacial normal stress, and stress critical point. It provides some guidance for the design and optimization of solar modules.
关键词： Solar cell,Thermal expansion,Critical point,Simplified model
更新于2025-09-23 15:21:01
-
Aqueous Sn-S Complex Derived Electron Selective Layer for Perovskite Solar Cells
摘要： A novel aqueous Sn-S complex solution was applied as precursor to fabricate SnO2 electron selective layers (ESLs) for the hybrid perovskite solar cells (PSCs). The tin and sulfur powder were directly dissolved in a (NH4)2S water solution to form Sn-S precursor. After depositon and annealing, the SnO2 film was formed, presenting as a low cost and enviromental friendly method for preparation of ESL. The films showed excellent transmittance at visible wavelength range. Moreover, the method exhibited high compatibility for doping using Cu, Cd, Li, and Zn elements. Zn doping (0.05 M) in the as-prepared SnO2 ESL significantly improved perovskite solar cells (PSCs) performance. The highest PCE of 13.17% was achived with 15% enhancement compared to that of undoped SnO2 ESL samples. TiCl4 modifications on SnO2 film improved photovoltaic performance to 14.45%, but resulted in the poor long-term stability, around 80% more degredation than that of PSCs based on Zn-doped SnO2 films.
关键词： SnO2,Sn-S complex,aqueous solution,perovskite solar cell,electron selective layer
更新于2025-09-23 15:21:01
-
Simulation of Silicon Heterojunction Solar Cells for High Efficiency with Lithium Fluoride Electron Carrier Selective Layer
摘要： In this work, to ameliorate the quantum e?ciency (QE), we made a valuable development by using wide band gap material, such as lithium ?uoride (LiFx), as an emitter that also helped us to achieve outstanding e?ciency with silicon heterojunction (SHJ) solar cells. Lithium ?uoride holds a capacity to achieve signi?cant power conversion e?ciency because of its dramatic improvement in electron extraction and injection, which was investigated using the AFORS-HET simulation. We used AFORS-HET to assess the restriction of numerous parameters which also provided an appropriate way to determine the role of diverse parameters in silicon solar cells. We manifested and preferred lithium ?uoride as an interfacial layer to diminish the series resistance as well as shunt leakage and it was also bene?cial for the optical properties of a cell. Due to the wide band gap and better surface passivation, the LiFx encouraged us to utilize it as the interfacial as well as the emitter layer. In addition, we used the built-in electric and band o?set to explore the consequence of work function in the LiFx as a carrier selective contact layer. We were able to achieve a maximum power conversion e?ciency (PEC) of 23.74%, ?ll factor (FF) of 82.12%, Jsc of 38.73 mA cm?2, and Voc of 741 mV by optimizing the work function and thickness of LiFx layer.
关键词： electric ?eld,silicon heterojunction solar cell,lithium ?uoride,electron selectivity contact layer,work function
更新于2025-09-23 15:21:01
-
Phenylhydrazinium Iodide for Surface Passivation and Defects Suppression in Perovskite Solar Cell
摘要： In recent years, hybrid perovskite solar cells (HPSCs) have received considerable research attention due to their impressive photovoltaic performance and low-temperature solution processing capability. However, there remain challenges related to defect passivation and enhancing the charge carrier dynamics of the perovskites, to further increase the power conversion efficiency of HPSCs. In this work, the use of a novel material, phenylhydrazinium iodide (PHAI), as an additive in MAPbI3 perovskite for defect minimization and enhancement of the charge carrier dynamics of inverted HPSCs is reported. Incorporation of the PHAI in perovskite precursor solution facilitates controlled crystallization, higher carrier lifetime, as well as less recombination. In addition, PHAI additive treated HPSCs exhibit lower density of filled trap states (1010 cm?2) in perovskite grain boundaries, higher charge carrier mobility (≈11 × 10?4 cm2 V?1 s), and enhanced power conversion efficiency (≈18%) that corresponds to a ≈20% improvement in comparison to the pristine devices.
关键词： surface passivation,defect suppression,additive material,perovskite,solar cell
更新于2025-09-23 15:21:01
-
How the Mixed Cations (Guanidium, Formamidinium, and Phenylethylamine) in Tin Iodide Perovskites Affect Their Charge Carrier Dynamics and Solar Cell Characteristics
摘要： Despite recent interest in lead-free Sn iodide perovskite (ASnI3) solar cells, the role of mixed A-site cations is yet to be fully understood. Here, we report the effect of the ternary mixing of organic A-site cations (guanidium, GA; formamidinium, FA; and phenylethylamine, PEA) on the solar cell performance and charge carrier dynamics that are evaluated using time-resolved microwave conductivity (TRMC). (GAxFA1?x)0.9PEA0.1SnI3 exhibits the maximum power conversion efficiency (PCE) of 7.90% at x = 0.15 and a drastic decrease with increasing GA content. Notably, our TRMC measurements of ASnI3 with/without a hole transport layer reveal the same trend with the devices. From the analyses, we suggest that a variation of electron mobility affected by the location of the GA cation in the grains significantly impacts the PCE. Our work sheds light on the role of mixed A-site cations and directs a route toward the further development of Sn perovskite solar cells.
关键词： time-resolved microwave conductivity,mixed A-site cations,solar cell performance,Sn iodide perovskite,charge carrier dynamics,lead-free
更新于2025-09-23 15:21:01