- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
2D/2D/2D heterojunction of Ti3C2 MXene/MoS2 nanosheets/TiO2 nanosheets with exposed (001) facets toward enhanced photocatalytic hydrogen production activity
摘要： Exposing the highly active facets and hybridizing the photocatalyst with appropriate cocatalysts with right placement have been regarded as a powerful approach to high performance photocatalysts. Herein, TiO2 nanosheets (NSs) are in situ grown on highly conductive Ti3C2 MXene and then MoS2 NSs are deposited on the (101) facets of TiO2 NSs with mainly exposed high-active (001) facets through a two-step hydrothermal method. And a unique 2D-2D-2D structure of Ti3C2@TiO2@MoS2 composite is achieved. With an optimized MoS2 loading amounts (15 wt%), the Ti3C2@TiO2@MoS2 composite shows a remarkable enhancement in the photocatalytic H2 evolution reaction compared with Ti3C2@TiO2 composite and TiO2 NS. It also shows good stability under the reaction condition. This arises from: (i) the in situ growth of TiO2 NSs construct strong interfacial contact with excellent electronic conductivity of Ti3C2, which facilitates the separation of carriers; (ii) the coexposed (101) and (001) facets can form a surface heterojunction within single TiO2 NS, which is beneficial for the transfer and separation of charge carriers; and (iii) the MoS2 NSs are deposited on the electrons-rich (101) facets of TiO2 NSs, which not only effectively reduces the charge carriers recombination rate by capturing photoelectrons, but also makes TiO2 NSs expose more highly active (001) facets to afford high-efficiency photogeneration of electron-hole pairs.
关键词： Exposed active facet,Ti3C2 MXene,TiO2 nanosheets,Photocatalytic H2 production,MoS2 nanosheets
更新于2025-09-23 15:22:29
-
Hierarchical Fe2O3 nanorods/TiO2 nanosheets heterostructure: Growth mechanism, enhanced visible-light photocatalytic and photoelectrochemical performances
摘要： A novel three-dimensional (3D) Fe2O3 nanorods (NRs)/TiO2 nanosheets (NSs) heterostructure is fabricated by employing the TiO2 NSs with dominant high-energy {0 0 1} facets as synthetic template via the facile hydrothermal and chemical bath deposition methods. The structure, morphology and optical property of 3D Fe2O3/TiO2 composites are examined, and the results demonstrate that these samples have pure phase, high crystallinity and good visible-light response. Furthermore, all Fe2O3/TiO2 composites exhibit the superior photocatalytic and photoelectrochemical (PEC) performances compared to pure TiO2 NSs, which should be ascribed to the larger surface area, better optical absorption and efficient electron-hole separation of 3D Fe2O3/TiO2 heterostructure. Among Fe2O3/TiO2 composites, the sample T3 obtained by using 0.05 M iron nitrate at 90 °C for 100 min exhibited the best visible-light photocatalytic activity and PEC performance, which achieves 89.3% photodegradation of Methyl Blue within 120 min and 2.39 mA cm?2 photocurrent density at a potential of 0 V, respectively. The photocatalytic degradation efficiency and photocurrent density of T3 are 1.83 and 11.95 times higher than that of pure TiO2 NSs. In addition, the detailed growth mechanism of Fe2O3 nanomaterials onto TiO2 NSs and the optimization mechanism of photocatalytic and PEC performances are also discussed in present paper.
关键词： Photoelectrochemical,Photocatalytic,Visible-light,TiO2 nanosheets,Fe2O3/TiO2 heterostructure
更新于2025-09-23 15:22:29
-
Photocatalytic degradation and adsorption of phenol by solvent-controlled TiO2 nanosheets assisted with H2O2 and FeCl3: Kinetic, isotherm and thermodynamic analysis
摘要： Hydrofluoric acid (HF) has been widely employed to regulate the surface characteristics of TiO2 containing sheet-like morphology with (001) facets for various environmental applications. However, carcinogenic effects associated with HF are the main stumbling blocks on its way towards global commercialization. In the same line of action, an eco-friendly approach for the synthesis of anatase TiO2 nanosheets (TNSs) via employing hydrothermal process and N, N dimethylformamide (DMF) as a novel morphology-controlling agent has been reported. The as-produced TNSs were characterized by XRD, HRTEM, Raman, FTIR, XPS and DRS characterizations. The photoactivity of as-produced TNSs was studied for photocatalytic degradation of phenol under visible light irradiation in the presence of green oxidants such as hydrogen peroxide (H2O2) and ferric chloride (FeCl3) to produce free hydroxyl radicals for speedily reduction of recombination of photogenerated electrons hole-pairs. The results revealed that as-produced TNSs could activate by green oxidants with yielding upto 94.19 and 97.12 % phenol degradation in the presence of H2O2 and FeCl3, respectively. Moreover, phenol adsorption data was well explained via pseudo first order and pseudo second order kinetics while Langmuir and Freundlich isotherms were more suitable to explain the adsorption of phenol onto TNSs, providing maximum adsorption capacity up to 23.596 mg/g. Various thermodynamic parameters were evaluated, suggesting the favourable, spontaneous and endothermic adsorption process. The values of activation energy (18.505 kJ/mol) confirmed the physical adsorption of phenol onto TNSs. The excellent aptitude of anatase TNSs to produce hydroxyl radicals and super-oxides radicals with promptly lessening of recombination of photogenerated electron hole-pairs makes them motivated applicant for wastewater treatment.
关键词： N, N dimethylformamide,green oxidants,adsorption mechanism,Hydrothermal process,TiO2 nanosheets,phenol
更新于2025-09-23 15:21:01