- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Recent progress in high-performance photo-detectors enabled by the pulsed laser deposition technology
摘要： In the past decade, photo-detectors have been demonstrated to have very important applications in image sensing, optical communication, fire detection, environmental monitoring, space exploration, safety detection, and many other scientific research and industrial technology fields and are regarded as the key components of wearable devices. Compared to traditional fabrication approaches, pulsed-laser deposition (PLD)-grown materials for photo-detectors offer several merits. First, PLD is a clean physical vapor deposition approach. A stoichiometric amount of atoms can be transferred from the target to the substrate, avoiding complicated and potentially dangerous chemical reactions. Furthermore, the PLD process is carried out in a high-vacuum environment. Therefore, almost no contaminants, such as catalysts, precursors, surfactants and by-products, will be introduced. Also, the thickness of the films can be controlled by simply manipulating the energy and pulse number of the pulsed laser. Furthermore, the fabrication temperature is relatively low, which is available to deposit materials on various substrates, even flexible ones. Most importantly, PLD is a deposition technology with large area coverage, which can produce centimeter-scale thin films, the planar geometry of which has significant potential for compact device integration with modern semiconductor techniques. Consequently, this review introduces the recent advances on the materials, fabrication, and application of pulsed-laser deposition for a variety of high-performance photo-detectors from an overall perspective. Moreover, the challenges and future development trends are discussed.
关键词： wearable devices,fabrication,optoelectronics,applications,photo-detectors,PLD,pulsed-laser deposition,high-performance,materials
更新于2025-09-23 15:21:01
-
Detection of Nutrition and Toxic Elements in Pakistani Pepper Powders Using Laser Induced Breakdown Spectroscopy
摘要： In the current paper, we applied laser induced breakdown spectroscopy (LIBS) to determine the elemental distribution of nutritional and trace heavy metals in pepper powders available in Pakistan using standard calibration curve laser induced breakdown spectroscopy (CC-LIBS) technique. The samples were found to contained elements like K, Ca, Mg, Na, Fe, Zn, Al, Pb, Cu, and Cr. Additionally, we also identified the atmospheric H-alpha line of hydrogen in the spectra which was used to estimate the electron number density. To achieve a highly sensitive LIBS system to determine nutritional and trace amounts of toxic metals in pepper powders and to achieve the best limit of detection, the LIBS system was optimized by studying the dependency of LIBS signal intensity on laser irradiance, variation in spacing between the focusing lens and target as well on the gate width. To justify the results of LIBS study, we also determined the concentration of alike (duplicate) peppers by digesting samples in appropriate solvents using a standard method like inductively coupled plasma-optical emission spectrometry (ICP-OES). The minimum detection limit was recognized for trace heavy metals from calibration curves. The results of LIBS displayed noteworthy conformity with those acquired from the ICP-OES analysis. Results of both the techniques clearly revealed that K was the most abundant element in all the peppers followed by Ca, Mg, Na, Fe, Al, Pb, Zn, Cu, and Cr. The relative accuracy of our LIBS system for different species as compared with ICP technique was in the range of 0.08–0.3 at 2.5 % error confidence. Conclusively, the present work demonstrated the suitability of LIBS technique due to its rapid, non destructive and eco-friendly approach for food security.
关键词： ICP-OES,detection of heavy metals,peppers analysis,laser induced breakdown spectroscopy,plasma parameters,Health impacts of toxic metals,laser applications
更新于2025-09-23 15:21:01
-
Effect of film thickness and evaporation rate on co-evaporated SnSe thin films for photovoltaic applications
摘要： SnSe thin films were deposited by a co-evaporation method with different film thicknesses and evaporation rates. A device with a structure of soda-lime glass/Mo/SnSe/CdS/i-ZnO/ITO/Ni/Al was fabricated. Device efficiency was improved from 0.18% to 1.02% by a film thickness of 1.3 mm and evaporation rate of 2.5 ? s?1 via augmentation of short-circuit current density and open-circuit voltage. Properties (electrical, optical, structural) and scanning electron microscopy measurements were compared for samples. A SnSe thin-film solar cell prepared with a film thickness of 1.3 mm and evaporation rate of 2.5 ? s?1 had the highest electron mobility, better crystalline properties, and larger grain size compared with the other solar cells prepared. These data can be used to guide growth of high-quality SnSe thin films, and contribute to development of efficient SnSe thin-film solar cells using an evaporation-based method.
关键词： SnSe thin films,film thickness,co-evaporation,photovoltaic applications,evaporation rate
更新于2025-09-23 15:21:01
-
Silver-Gold Bimetallic Alloy versus Core-Shell Nanoparticles: Implications for Plasmonic Enhancement and Photothermal Applications
摘要： Bimetallic plasmonic nanoparticles enable tuning of the optical response and chemical stability by variation of the composition. The present numerical simulation study compares Ag-Au alloy, Ag@Au core-shell, and Au@Ag core-shell bimetallic plasmonic nanoparticles of both spherical and anisotropic (nanotriangle and nanorods) shapes. By studying both spherical and anisotropic (with LSPR in the near-infrared region) shapes, cases with and without interband transitions of Au can be decoupled. Explicit comparisons are facilitated by numerical models supported by careful validation and examination of optical constants of Au-Ag alloys reported in literature. Although both Au-Ag core-shell and alloy nanoparticles exhibit an intermediary optical response between that of pure Ag and Au nanoparticles, there are noticeable differences in the spectral characteristics. Also, the effect of the bimetallic constitution in anisotropic nanoparticles is starkly different from that in spherical nanoparticles due to the absence of Au interband transitions in the former case. In general, the improved chemical stability of Ag nanoparticles by incorporation of Au comes with a cost of reduction in plasmonic enhancement, also applicable to anisotropic nanoparticles with a weaker effect. A photothermal heat transfer study confirms that increased absorption by the incorporation of Au in spherical Ag nanoparticles also results in an increased steady state temperature. On the other hand, anisotropic nanoparticles are inherently better absorbers, hence better photothermal sources and their photothermal properties are apparently not strongly affected by the incorporation of one metal in the other. This study of the optical/spectral and photothermal characteristics of bimetallic Au-Ag alloy versus core-shell nanoparticles provides a detailed physical insight for the development of new taylor-made plasmonic nanostructures.
关键词： Localized Surface Plasmon Resonance (LSPR),Au@Ag core-shell,Ag-Au alloy,Ag@Au core-shell,Bimetallic plasmonic nanoparticles,Photothermal applications
更新于2025-09-23 15:21:01
-
Submicron laser-textured vents for self-cleaning injection molds
摘要： Clogging of venting slots in injection molds is a common maintenance problem caused by the degradation and the accumulation of gaseous and volatiles by-products of polymer melting. In this work, the effect of laser-induced periodic surface structures on the self-cleaning properties of venting slots is investigated. The degradation of poly(ethylene terephthalate) (PET) over different surfaces is characterized by reproducing the mechanisms that occurs in mold cavities when the air is pushed through the venting channel. An imaging technique is developed for the quantification of the sediment that deposits on sample surfaces due to condensation of by-products of PET melting. The experimental results indicate that the use of a multiscale texture minimizes the deposition of residues on the vent surface reducing it from 17.2 to 3.1%. A linear dependency between contact angle and clogging ratio indicates the efficacy of the model that explains vent self-cleaning properties considering their wetting properties.
关键词： applications,surfaces and interfaces,thermoplastics
更新于2025-09-23 15:21:01
-
One-step spray of Cu2NiSnS4 thin films as absorber materials for photovoltaic applications
摘要： A simple one-step ?Spray Pyrolysis? technique was developed for preparing Cu2NiSnS4 (CNTS) thin film followed by an annealing treatment process. Originally, the spray technique was successfully used to deposit the thin film onto glass substrate at 250 °C for 60 min spray duration. Again, the deposited thin film was annealed in a sulfur atmosphere at a temperature of 500 °C during 30 min. The sulfured thin film exhibits (111), (220) and (311) orientations correspond well to the cubic CNTS structure and other impurity compounds. The SEM data exhibit a uniform, rough and compact topography of CNTS thin films with an average-thickness of 1.36 μm. The absorption coefficient is found to be higher than 104 cm?1 in the visible region while the direct band energy of 1.62 eV, which is eminently suitable for use as an absorber in the solar cell. The complex impedance diagrams indicate the decrease of resistance by increasing temperature, which attributes to a semiconductor behavior. The close values of activation energies 0.63 and 0.54 eV determined from both angular frequency and DC conductivity indicate that the carrier transport mechanism is thermally activated.
关键词： Cu2NiSnS4,Photovoltaic applications,Spray Pyrolysis,Semiconductor behavior,Thin films
更新于2025-09-23 15:21:01
-
Synthesis of Tungsten Disulfide and Molybdenum Disulfide Quantum Dots and their Applications
摘要： With fascinating optical, electronic, and mechanical properties, tungsten disulfide (WS2) and molybdenum disulfide (MoS2) quantum dots (QDs) are promising for related applications. Their bandgap energy, photoluminescence and electrochemical properties are closely related to their size, morphology, dimensionality, crystal phase and structure. In this review, we introduce the crystal phases and structures of WS2 and MoS2 QDs followed by a summary of their physical and chemical synthetic methods and their applications in light-emitting devices (LEDs), supercapacitors and others. Additionally, the advantages and limitations of different synthetic strategies and challenges in these promising fields are discussed on the basis of current development.
关键词： Synthesis methods,Applications,Quantum dots,Molybdenum disulfide,Tungsten disulfide
更新于2025-09-23 15:21:01
-
Enhancing the performance of LARP-synthesized CsPbBr <sub/>3</sub> nanocrystal LEDs by employing a dual hole injection layer
摘要： Lead halide perovskites have been considered promising materials for optoelectronic applications owing to their superior properties. CsPbBr3 nanocrystals (NCs) with a narrow particle size distribution and a narrow emission spectrum are synthesized by ligand-assisted re-precipitation (LARP), a low-cost and facile process. In inverted CsPbBr3 NC LEDs, a dual hole injection layer (HIL) of 1,4,5,8,9,11-hexaazatriphenylene-hexacarbonitrile (HAT-CN)/MoO3 is introduced to enhance hole injection and transport, because HAT-CN can extract electrons easily from the hole transport layer and leave a large number of holes there. The current and power efficiencies of the optimized device with a dual HIL are 1.5- and 1.8-fold higher than those of the single HIL device. It is believed that the dual HAT-CN/MoO3 HIL effectively promotes hole injection and has promise for application in many other devices.
关键词： Ligand-assisted re-precipitation,Optoelectronic applications,Lead halide perovskites,CsPbBr3 nanocrystals,Dual hole injection layer,HAT-CN/MoO3
更新于2025-09-23 15:21:01
-
Surface functionalization by laser-induced periodic surface structures
摘要： In recent years, the improved understanding of the formation of laser-induced periodic surface structures (LIPSS) has led to an emerging variety of applications that modify the optical, mechanical, and chemical properties of many materials. Such structures strongly depend on the laser beam polarization and are formed usually after irradiation with ultrashort linearly polarized laser pulses. The most accepted explanation for the origin of the structures is based on the interference of the incident laser radiation with electromagnetic surface waves that propagate or scatter at the surface of the irradiated materials. This leads to an intensity modulation that is finally responsible for the selective ablation in the form of parallel structures with periods ranging from hundreds of nanometers up to some micrometers. The versatility when forming such structures is based on the high reproducibility with different wavelengths, pulse durations and repetition rate laser sources, customized micro- and nanometric spatial resolutions, and compatibility with industrially relevant processing speeds when combined with fast scanning devices. In this contribution, we review the latest applications in the rapidly emerging field of surface functionalization through LIPSS, including biomimetic functionalities on fluid transport, control of the wetting properties, specific optical responses in technical materials, improvement of tribological performance on metallic surfaces, and bacterial and cell growth for medical devices, among many others.
关键词： applications,laser processing,surface functionalization,laser-induced periodic surface structures (LIPSS)
更新于2025-09-23 15:21:01
-
Processing and Study of Optical and Electrical Properties of (Mg, Al) Co-Doped ZnO Thin Films Prepared by RF Magnetron Sputtering for Photovoltaic Application
摘要： In this study, high transparent thin films were prepared by radio frequency (RF) magnetron sputtering from a conventional solid state target based on ZnO:MgO:Al2O3 (10:2 wt %) material. The films were deposited on glass and silicon substrates at the different working pressures of 0.21, 0.61, 0.83 and 1 Pa, 300 °C and 250 W of power. X-ray diffraction patterns (XRD), atomic force microscopy (AFM), UV-vis absorption and Hall effect measurements were used to evaluate the structural, optical, morphological and electrical properties of thin films as a function of the working pressure. The optical properties of the films, such as the refractive index, the extinction coefficient and the band gap energy were systematically studied. The optical band gap of thin films was estimated from the calculated absorption coefficient. That parameter, ranged from 3.921 to 3.655 eV, was hardly influenced by the working pressure. On the other hand, the lowest resistivity of 8.8 × 10?2 ? cm was achieved by the sample deposited at the lowest working pressure of 0.21 Pa. This film exhibited the best optoelectronic properties. All these data revealed that the prepared thin layers would offer a good capability to be used in photovoltaic applications.
关键词： working pressure,Al doped ZnO-MgO powder,RF magnetron sputtering,photovoltaic applications,thin films,solid-state method,optoelectronic properties
更新于2025-09-23 15:21:01