- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Temperature uniformity enhancement of densely packed high concentrator photovoltaic module using four quadrants microchannel heat sink
摘要： The dense solar radiation received by a high concentration photovoltaic module (HCPVM) causes a high cell temperature. In this module, multiple solar cells were electrically connected in both series and parallel. The higher temperature of the solar cell in the series string limits the generated power for the whole string. Therefore, it is crucial to employ a uniform cooling mechanism for higher electrical performance along with a longer lifespan. The uniform cooling is required to attain safe operating temperature and prevent the hot spot formation. Hence, in the current work, a four-compartment microchannel heat sink is proposed for the thermal management of HCPVM under high solar concentration of 1000 suns (1 sun = 1000 W/m2). A three-dimensional (3D) conjugate heat transfer model with exergy analysis is developed and validated. This model was used to investigate the effect of inlet and outlet orientation of four quadrants microchannel heat sink as a cooling method for HCPVM. Eight different orientations of parallel-flow and counter-flow conditions were investigated and compared in terms of temperature non-uniformity, module power, and exergy performance. The results showed that the inlet and outlet orientation was a key role affecting the module temperature non-uniformity. For the counter-flow operated heat sinks, the HCPVM can be operated under a temperature non-uniformity of 3.1 °C at total inlet module mass flowrate of 350 g/min and solar concentration ratio of 1000 suns. In addition, the attained HCPVM electrical, thermal, and overall exergy efficiency were 37.2%, 8.2%, and 45.4% respectively at the same conditions.
关键词： Densely packed module,Solar concentration ratio,Exergy analysis,Microchannel heat sink,Uniform cooling
更新于2025-09-23 15:21:01
-
Estimation of the performance limits of a concentrator solar cell coupled with a micro heat sink based on a finite element simulation
摘要： Concentrated photovoltaic (CPV) technology makes use of cheap optical elements to amplify the irradiance and focus it on small-sized solar cells enabling the extraction of higher amounts of electricity. However, increasing the solar concentration raises the temperature of the PV cell which can deter its performance and can also cause its failure. To combat this issue both active and passive cooling mechanisms are utilized for different types of CPV systems. In this study, we determine the limits of passive cooling systems and establish when an active cooling system is needed based on the recommended operating temperature of the solar cell. We investigate the temperature characteristics of the solar cells bonded to three different substrate materials under different solar concentrations. Results showed that cell temperature is linearly dependent on the concentration ratio and ambient temperature independent of the substrate material. Further, the integration of a micro-finned heatsink results in higher heat dissipation by 25.32%, 23.13%, and 22.24% in comparison with a flat plate heatsink for Direct Bonded Copper (DBC), Insulated Metal Substrate (IMS), and Silicon Wafer (Si wafer) substrates respectively. The low thermal resistance of the IMS substrate compared to the DBC and the Si wafer substrates result in the best thermal performance in terms of maintaining the cell temperature < 80 °C and allowing a wider range of high concentration ratio.
关键词： Concentration Ratio,Passive cooling,micro fin heat-sink,finite element,Concentrating Photovoltaic,flat-plate heat-sink
更新于2025-09-23 15:19:57
-
Optical Performance Analysis of Single Flow Through and Concentric Tube Receiver Coupled with a Modified CPC Collector Under Different Configurations
摘要： Compound parabolic concentrating (CPC) collectors have great potential to provide sustainable solar thermal energy for many applications operating in the medium temperature range. This paper presents the design, development and performance evaluation of a modified CPC collector integrated with an evacuated tube receiver. The optical performance of the designed CPC paired with concentric tube receiver is compared with that of a CPC coupled with single flow through evacuated tube receiver for stationary installation in the East-West and North-South directions. Ray tracing simulations of different configurations demonstrate that CPC coupled with single flow through receivers suffer high gap losses, especially at smaller incidence angles which are considerably alleviated by a concentric tube receiver arrangement. East-West installation of CPC paired with concentric tube receiver exhibited superior optical performance than all other configurations. The yearly average optical efficiency of CPC with concentric tube receiver was 5% higher than that of a single flow through receiver within the acceptance angle. A 60% truncated CPC coupled with concentric tube receiver emerged as the most effective design, which was fabricated for experimental testing. The tests conducted under actual outdoor tropical environmental conditions demonstrated that the experimental optical efficiency reached to about 69% in the case of N-S installation and 66.5% in an E-W arrangement. The experimental results closely match the simulation outcomes, which indicate the proposed performance prediction technique as instrumental for selecting the most effective configuration of CPC collectors for medium temperature heat supply.
关键词： concentric tube receiver,single flow through tube,compound parabolic concentrator,evacuated tube receiver,optical performance,concentration ratio
更新于2025-09-19 17:13:59
-
Thermodynamic analysis of Organic Rankine cycle driven by reversed absorber hybrid photovoltaic thermal compound parabolic concentrator system
摘要： In current study, an effort is made to improve the overall performance of the solar powered organic Rankine system to meet increasing energy demand and mitigate the resulting menace caused by environmental imbalance. Hourly performance evaluation of Solar powered Organic Rankine Cycle (ORC) system is done for varying concentration ratio in terms of collector output temperature, heat gain in evaporator, combined thermal and exergetic efficiency. The Heptane/R245fa is used as working fluid at fixed (0.1/0.9) fractional mass component. Organic Rankine system is coupled with reversed absorber hybrid photovoltaic thermal compound parabolic concentrator (PVTCPC). The highest collector outlet temperature 125.45 (cid:1)C, heat gain 3.21 (cid:3) 105 W, combined thermal efficiency 7.8%, and exergetic efficiency 14.38% is observed at 13:00 h for 6 concentration ratio of the concentrator. This study establishes the utility of low-grade renewable heat source conversion into solar electrification, solar irrigation, solar cooling and solar water purification.
关键词： Concentration ratio,Heptane /R245fa,Reversed absorber,Zeotropic mixture,Organic Rankine cycle
更新于2025-09-16 10:30:52
-
Design of Curved Fresnel Lens with High Performance Creating Competitive Price Concentrator Photovoltaic
摘要： In this paper, the design of a curved Fresnel lens applying to the concentrator photovoltaic system is proposed by using the edge ray theorem, the Snell’s law, and the conservation of optical path length. The new structure of the curved Fresnel lens can improve significantly the uniformity of sunlight distribution over the solar cell while the concentration ratio can reach a high value of 900 times. The good uniform distribution can be obtained by using the novel idea. The novel idea is based on the uniform sunlight distribution of every groove of the lens so that the whole lens also distributes uniformly the sunlight beam over the receiver. The structure of the lens is built by two surfaces: input surface (or upper surface) as a part of spherical surface and output surface (or lower surface) that consists all grooves of the lens. Matlab program is used to design the input and the output surfaces of the lens. The input surface and the output surface are independent to each other in construction in Matlab. LighttoolsTM software is used to optimize the structure of the novel lens. Furthermore, LighttoolsTM is also used to perform a simulation to examine the efficiency of the lens in concentrator photovoltaic (CPV) system by using the light source with a wide spectrum of 380 – 1600 nm. The results show that the lens has an acceptance angle of 0.80 and good optical efficiency (>85%).
关键词： concentrator photovoltaic (CPV),Fresnel lens,solar energy,high concentration ratio,multi-junction solar cells,uniform irradiance distribution,CPV without secondary optical element (SOE)
更新于2025-09-12 10:27:22
-
AIP Conference Proceedings [AIP Publishing 15th International Conference on Concentrator Photovoltaic Systems (CPV-15) - Fes, Morocco (25–27 March 2019)] 15th International Conference on Concentrator Photovoltaic Systems (CPV-15) - Optimum design of V-trough solar concentrator for photovoltaic applications
摘要： This paper presents a novel design of V-trough Solar Concentrator (VSC) for low concentrator photovoltaic (CPV) applications. The conventional VSC design comprises of two flat reflectors slanted by an angle and attached to a PV module. The maximum reported concentration ratio (CR) and optical efficiency (OE) of this concentrator are 2x and 89.91%, respectively. This paper demonstrates the process of improving the VSC. The geometrical and optical performance of the conventional VSC were optimized by the theoretical image technique. The experimental CR and OE are increased by 43.50% and 4.32%, respectively. Then, a crossed V-trough design “Pyramid” is suggested to increase the concentrated radiation. Pyramid concentrator boosted the CR, but the OE is dropped. Eventually, a new VSC geometry is proposed and resulted in CR of 4.70x and OE of 91.83%. The new design demonstrates the possibility of obtaining the same CR using a smaller reflector area than conventional and pyramid V-trough configurations, leading to a reduction in production cost. The results show the potential to further improve this type of solar concentrator for photovoltaic applications.
关键词： V-trough Solar Concentrator,solar concentrator design,concentration ratio,photovoltaic applications,optical efficiency
更新于2025-09-11 14:15:04
-
Optical performance analysis of an innovative linear focus secondary trough solar concentrating system
摘要： The parabolic trough solar concentrating system has been well developed and widely used in commercial solar thermal power plants. However, the conventional system has its drawbacks when connecting receiver tube parts and enhancing the concentration ratio. To overcome those inherent disadvantages, in this paper, an innovative concept of linear focus secondary trough concentrating system was proposed, which consists of a fixed parabolic trough concentrator, one or more heliostats, and a fixed tube receiver. The proposed system not only avoids the end loss and connection problem on the receiver during the tracking process but also opens up the possibility to increase the concentration ratio by enlarging aperture. The design scheme of the proposed system was elaborated in detail in this paper. Besides, the optical performance of the semi and the whole secondary solar trough concentrator was evaluated by using the ray tracing method. This innovative solar concentrating system shows a high application value as a solar energy experimental device.
关键词： secondary parabolic trough solar concentrator,optical performance,concentration ratio,linear focus,ray tracing method
更新于2025-09-09 09:28:46