- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Effect of the corona treatment on the microstructure of PVDF probed by electrochemical impedance spectroscopy
摘要： The microstructure of Polyvinylidene Fluoride (PVDF) membrane treated by corona was investigated in this study. The crystalline structure of PVDF membrane was con?rmed by x-ray diffraction (XRD), and the hole structure was evaluated by electrochemical impedance spectroscopy (EIS). It was found that the β phase appears in XRD pattern for treated PVDF, implying the polarization during corona treatment. The variation of membrane resistance suggested that the hole structure of PVDF became more porous with increasing treated time from 0 h to 2 h ?rstly, then became denser with treated time from 2 h to 4 h, and ?nally cracked at the treated time longer than 4 h. All the results indicated that corona treatment would induce the change of the bulk structure of PVDF membrane.
关键词： polyvinylidene ?uoride,corona treatment,electrochemical impedance spectroscopy,hole structure
更新于2025-09-23 15:21:01
-
Flexible Capacitive Pressure Sensor Based on PDMS Substrate and Ga-In Liquid Metal
摘要： A novel flexible pressure sensor, based on polydimethylsiloxane (PDMS) and eutectic gallium indium (EGaIn) liquid metal, was developed for detecting various applied pressures. The sensor was fabricated with PDMS polymer based electrode channels that are filled with EGaIn liquid metal. The liquid metal based electrodes were designed to form four capacitors (C1, C2, C3 and C4). Conventional PCB technology was used to manufacture the master mold to form the PDMS based electrode channels. Corona discharge treatment was employed to bond the PDMS layers at room temperature, under atmospheric pressure. The capability of the fabricated pressure sensor was demonstrated by investigating the capacitive based response of the device for varying applied pressures. Average capacitance changes ranging from 2.3% to 12.0%, 2.6% to 11.8%, 2.5% to 12.2% and 2.7% to 13.1% when compared to the based capacitance of 14.1 pF, 15.1 pF, 13.8 pF and 13.3 pF was obtained for C1, C2, C3 and C4, respectively, for applied pressures ranging from 0.25 MPa to 1.10 MPa. A linear relationship was obtained for the average capacitance change with a sensitivity of 0.11%/MPa, and a correlation coefficient of 0.9975. The results obtained thus demonstrate the feasibility of employing liquid metal based electrodes for the fabrication of flexible pressure sensing devices.
关键词： Corona treatment,Polydimethylsiloxane (PDMS),Eutectic Gallium - Indium (EGaIn),Printed circuit board (PCB),Pressure Sensor
更新于2025-09-23 15:21:01