- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
The Impact of Mobile Ions on the Steady State Performance of Perovskite Solar Cells
摘要： Mobile ions in perovskite solar cells induce many unique transient phenomena, while their influence under steady-state, the primary operating condition, has received little attention. Therefore, in this work we employ ionic-drift diffusion models to assess how the steady-state distribution of mobile ions affects the photogenerated carrier collection, and their redistribution due to dopants and energy band alignment. We demonstrate that mobile ions can transform the carrier transport mechanism from a combination of drift and diffusion to transport by diffusion only, which only impacts the device efficiency if the carrier mobility-lifetime product is limited due to increased transport losses and changed recombination dynamics. A high concentration of dopants is also required in perovskite devices for such doping to have a measurable impact while the energy alignment of the transport layers, on the other hand, can in principle result in a doping-like effect, which generally causes adverse consequences for cell efficiency.
关键词： dopants,steady-state performance,perovskite solar cells,energy band alignment,mobile ions,carrier transport
更新于2025-09-12 10:27:22
-
Valence-State Controllable Fabrication of Cu <sub/> 2– <i>x</i> </sub> O/Si Type-II Heterojunction for High-Performance Photodetectors
摘要： Cuprite, nominally cuprous oxide (Cu2O) but more correctly Cu2-xO, is widely used in optoelectronic applications due to its natural p-type, nontoxicity and abundant availability. However, the photoresponsivity of Cu2O/Si photodetectors (PDs) has been limited by the lack of high-quality Cu2-xO films. Herein, we report a facile room-temperature solution method to prepare high-quality Cu2-xO films with controllable x value which were used as hole selective transport layers in crystalline n-type silicon based heterojunction PDs. The detection performance of Cu2-xO/Si PDs exhibits a remarkable improvement via reducing the x value, resulting in the optimized PDs with high responsivity of 417 mA W-1 and fast response speed of 1.3 μs. Furthermore, the performance of the heterojunction PDs can be further improved by designing the pyramidal silicon structure, with enhanced responsivity of 600 mA W-1 and response speed of 600 ns. The superior photodetecting performance of Cu2-xO/n-Si heterojunctions is attributed to (i) the matched energy level band alignment, (ii) the low trap states in high-quality Cu2O thin films, (iii) the excellent light trapping. We expect the low-cost, highly efficient solution process would be of great convenience for large-scale fabrication of the Cu2-xO thin films and broaden the applications of Cu2-xO based optoelectronic devices.
关键词： photodetector,energy band alignment,Cuprous oxide,solution method,heterojunction
更新于2025-09-12 10:27:22
-
A low-temperature TiO2/SnO2 electron transport layer for high-performance planar perovskite solar cells; 低温 TiO2/SnO2 双电子传输层的光电性能及其在 钙钛矿电池中的应用;
摘要： Conventional titanium oxide (TiO2) as an electron transport layer (ETL) in hybrid organic-inorganic perovskite solar cells (PSCs) requires a sintering process at a high temperature to crystalize, which is not suitable for flexible PSCs and tandem solar cells with their low-temperature-processed bottom cell. Here, we introduce a low-temperature solution method to deposit a TiO2/tin oxide (SnO2) bilayer towards an efficient ETL. From the systematic measurements of optical and electronic properties, we demonstrate that the TiO2/SnO2 ETL has an enhanced charge extraction ability and a suppressed carrier recombination at the ETL/perovskite interface, both of which are beneficial to photo-generated carrier separation and transport. As a result, PSCs with TiO2/SnO2 bilayer ETLs present higher photovoltaic performance of the baseline cells compared with their TiO2 and SnO2 single-layer ETL counterparts. The champion PSC has a power conversion efficiency (PCE) of 19.11% with an open-circuit voltage (Voc) of 1.15 V, a short-circuit current density (Jsc) of 22.77 mA cm?2, and a fill factor (FF) of 72.38%. Additionally, due to the suitable band alignment of the TiO2/SnO2 ETL in the device, a high Voc of 1.18 V is achieved. It has been proven that the TiO2/SnO2 bilayer is a promising alternative ETL for high efficiency PSCs.
关键词： electron transport layer,low temperature,perovskite solar cell,energy band alignment,TiO2/SnO2
更新于2025-09-12 10:27:22