- 标题
- 摘要
- 关键词
- 实验方案
- 产品
过滤筛选
- 2019
- 2018
- light-emitting diode
- light distribution
- optical lens
- Monte Carlo raytracing
- road lighting
- optimization
- Inorganic perovskite quantum dots
- Stability
- Light-emitting diodes
- Light Source and Lighting
- Optoelectronic Information Materials and Devices
- Technical University of Gabrovo
-
A bipolar deep blue-emitting fluorescent material based on imidazole and triphenylamine for efficient non-doped OLEDs
摘要： A bipolar deep blue-emitting fluorescent material, 1-(4-tert-butyl phenyl)-2-[4-(N,N- diphenyl)phenyl]-4,5-diphenyl-1H-imidazole (TPA-PIM) has been designed and synthesized for efficient blue organic light-emitting diodes (OLEDs). The photophysical, thermal and electrochemical properties of TPA-PIM are investigated. TPA-PIM possesses high thermal stabilities with decomposition temperature of 396 °C and shows a strong deep-blue emission at 407 nm in N, N-dimethylformamide (DMF) solution. Single-carrier devices are fabricated to show that TPA-PIM has good bipolar characteristics. The non-doped fluorescent OLEDs using TPA-PIM as emitter exhibited stable and efficient deep-blue emissions with the CIE coordinates of (0.16, 0.09), the maximum luminance of 1392 cd m?2 and the maximum current efficiency of 2.60 cd A?1.
关键词： Triphenylamine,Blue light-emitting materials,Bipolar materials,Imidazole,Non-doped OLEDs
更新于2025-11-19 16:56:42
-
Strategies towards rational design of gold(iii) complexes for high-performance organic light-emitting devices
摘要： Gold(iii) complexes are attractive candidates as phosphorescent dopants in organic light-emitting devices for high-luminance full-colour displays. However, no data on the stability of such devices have been reported to date. Through rational molecular design and synthesis, we have successfully generated a new class of cyclometalated gold(iii) C^C^N complexes with tunable emission colours spanning from sky-blue to red. These complexes exhibit high photoluminescence quantum yields of up to 80% in solid-state thin films, excellent solubility and high thermal stability. Solution-processable and vacuum-deposited organic light-emitting devices based on these complexes operate with external quantum efficiencies of up to 11.9% and 21.6%, respectively, and operational half-lifetimes of up to 83,000 h at 100 cd m?2.
关键词： operational stability,phosphorescent dopants,organic light-emitting devices,cyclometalated,gold(iii) complexes,C^C^N complexes
更新于2025-11-19 16:56:35
-
Synthesis, Photophysical and Electroluminescent Properties of Iridium(III) Complexes with 2-Aryl-thiazole and Oxadiazol-substituted Amide Derivative Ligands
摘要： By using aryl-thiazole as cyclometalated ligand and oxadiazol-substituted amide as ancillary ligand, three novel iridium(III) complexes have been synthesized and characterized, and the photophysical and electrochemical properties have been investigated. Complexes 1–3 exhibit efficient phosphorescence emissions at 542, 555 and 585 nm with photoluminescence quantum yields (PLQYs) of 0.04, 0.03 and 0.02 in CH3CN solutions, respectively. In the 10 wt% doped 2,4-diphenyl-6-bis(12-phenylindolo)[2,3-a]carbazole-11-yl)-1,3,5-triazine (Dictrz) film, the PLQYs (0.88 for complex 1, 0.47 for complex 2 and 0.37 for complex 3) increase significantly owing to the great restriction of rotations and vibrations in rigid host. The organic light-emitting diodes based on these complexes show good performance with the maximum current efficiencies of 20.06, 22.20 and 13.45 cd A-1 and maximum power efficiencies of 13.54, 17.31 and 9.48 lm W?1 with the CIE coordinates of (0.46, 0.53), (0.49, 0.50) and (0.59, 0.40) for complexes 1?3, respectively.
关键词： Iridium complex,Aryl-thiazole,Organic light-emitting diodes,Oxadiazol-substituted amide
更新于2025-11-19 16:56:35
-
[IEEE 2018 19th International Conference on Electronic Packaging Technology (ICEPT) - Shanghai (2018.8.8-2018.8.11)] 2018 19th International Conference on Electronic Packaging Technology (ICEPT) - A Synthetic Method for Extremely Stable Thin Film of CsPbBr<inf>3</inf> QDs and its Application on Light-emitting Diodes
摘要： The ability to be mixed with the polymers is very important for applications of perovskite quantum dots (QDs), such as in display, lighting and so on. Here, a method for fabricating a thin film composed of CsPbBr3 QDs and polydimethylsiloxane (PDMS) was reported. By using the ethyl acetate, a large number of ligands on the surface were removed and the combination with polymers can realize. Based on the thin film, an LED device was assembled and its luminous flux, luminous efficiency, color temperature and CIE color coordinates were measured. What’s more, the thin film revealed a splendid stability after being stored for 42 days without any protection, which show the broad prospects of it.
关键词： Inorganic perovskite quantum dots,Stability,Light-emitting diodes
更新于2025-11-19 16:46:39
-
Effect of Excitation Wavelength on Optical Performances of Quantum-Dot-Converted Light-Emitting Diode
摘要： Light-emitting diode (LED) combined with quantum dots (QDs) is an important candidate for next-generation high-quality semiconductor devices. However, the effect of the excitation wavelength on their optical performance has not been fully explored. In this study, green and red QDs are applied to LEDs of different excitation wavelengths from 365 to 455 nm. The blue light is recommended for exciting QDs from the perspective of energy utilization. However, QD LEDs excited at 365 nm have unique advantages in eliminating the original peaks from the LED chip. Moreover, the green or red light excited by ultraviolet light has an advantage in colorimetry. Even for the 455 nm LED with the highest QD concentration at 7.0 wt%, the color quality could not compete with the 365 nm LED with the lowest QD concentration at 0.2 wt%. A 117.5% (NTSC1953) color gamut could be obtained by the 365 nm-excited RGB system, which is 32.6% higher than by the 455 nm-excited solution, and this can help expand the color gamut of LED devices. Consequently, this study provides an understanding of the properties of QD-converted LEDs under different wavelength excitations, and offers a general guide to selecting a pumping source for QDs.
关键词： excitation wavelength,colorimetry,quantum dots,light-emitting diode
更新于2025-11-19 16:46:39
-
Effect of UV wavelength on humic acid degradation and disinfection by-product formation during the UV/chlorine process
摘要： The efficiency of the ultraviolet (UV)/chlorine process strongly depends on UV wavelength because chlorine photolysis and its subsequent radical formation are highly wavelength-dependent. This study compared the degradation of humic acid (HA) during the UV/chlorine process by low pressure mercury lamp (LPUV, 254 nm) and ultraviolet light-emitting diode (UV-LED, 275 and 310 nm). The results indicated that HA degradation followed the pseudo-first-order kinetics, and the fluence-based degradation rate constants (kobs) were significantly affected by UV wavelength and solution pH. HA degradation decreased greatly with increasing solution pH during the UV/chlorine process at 254 nm, while the opposite trend was observed at 275 and 310 nm. In the meantime, kobs decreased in the order of 275 nm > 254 nm > 310 nm at pH > 7.0. The changes of chlorine molar absorption coefficients at different UV wavelengths resulted in the variation of chlorine photodecay rates (kobs, chlorine), and the synergistic effects of kobs, chlorine and chlorine quantum yields (Φchlorine) affected HA reduction. The formation of disinfection by-products (DBPs) during the UV/chlorine process was also evaluated. A significant suppression on DBP formation and DBP-associated calculated theoretical cytotoxicity were observed at 275 nm high UV fluence and alkaline pHs. These findings in this study demonstrate that UV wavelength at 275 nm is more suitable for HA degradation by the UV/chlorine advanced oxidation process in practical applications.
关键词： Disinfection by-products,Ultraviolet light-emitting diode (UV-LED),UV/chlorine,Humic acid,Toxicity,UV wavelength
更新于2025-11-19 16:46:39
-
Electrochemical capacitance-voltage profiling of nonuniformly doped GaAs heterostructures with SQWs and MQWs for LED applications
摘要： Light-emitting heterostructures with single and multiple GaAs/InGaAs quantum wells have been investigated by means of electrochemical capacitance-voltage (ECV) profiling. Capacitance-voltage characteristics were measured; concentration profiles of free charge carriers over the heterostructure depth as well as the intensity of quantum well filling by charge carriers were obtained. In heterostructures with a single quantum well (QW) we considered limitations of capacitance techniques for undoped QW profiling, which is situated near the metallurgic border of the p–n –junction. We made a detailed consideration of phenomena related to Debye smearing and we developed and analyzed the dependence of the space charge region width on the doping. Special attention was paid to investigation of the “blind” area. This was inspired by the practical problem from capacitance spectroscopy of semiconductors, when the researcher poses the task of obtaining a free charge carrier depth distribution profile as deep as possible in the space charge region, i.e. where the intensity of the electric field is maximum. Generally, the active QW of a LED heterostructure is placed deep in the space charge region, so reaching these regions is extremely important for practical problems. We present an evolution of capacitance-voltage characteristics during ECV profiling of nonuniformly doped p – n– heterostructures. For a heterostructure with multiple quantum wells we registered a response from 6 QWs.
关键词： capacitance-voltage profiling,heterostructure,quantum well,nonuniform doping,Electrochemical capacitance-voltage profiling,quantum dot,light-emitting diodes
更新于2025-11-14 17:28:48
-
Alcohol-Guided Growth of Two-Dimensional Narrow-Band Red-Emitting K2TiF6:Mn4+ for White Light-Emitting Diodes
摘要： The use of red phosphors with low light-scattering loss could improve the luminous efficacy and color rendering of white light-emitting diodes (LEDs). Thus, the discovery of such phosphors is highly desired. In this work, high-efficiency two-dimensional red-emitting K2TiF6:Mn4+ (KTFM) were synthesized via an alcohol-assisted coprecipitation route. The synergistic effects of 1-propanol and hydrofluoric acid (HF) on the growth of KTFM microsheets (MSs) were studied through the first-principles calculations, which revealed that 1-propanol promoted the growth of KTFM MSs by preferentially adsorbing on the H-terminated K2TiF6 (001) surface. The photoluminescence quantum efficiency (QE) of Mn4+-activated K2TiF6 MSs was highly related to their size and thickness. The morphology-optimal KTFM MSs presented high internal QE (> 90 %), external QE (> 71%), and thermal quenching temperature (102% at 150 °C relative to that at 25 °C). A prototype phosphor-converted LED with KTFM as the red-emitting component showed an excellent color rendition (Ra = 91, R9 = 79) and high luminous efficacy (LE =156 lm/w).
关键词： light emitting diode,two-dimensional material,Narrow band,K2TiF6:Mn4+,backlight,red emission
更新于2025-11-14 17:04:02
-
Facile microwave synthesis of carbon dots powder with enhanced solid-state fluorescence and its applications in rapid fingerprints detection and white-light-emitting diodes
摘要： In this report, we successfully developed a simple and fast MW-assisted method for preparing CDs with strong solid-state fluorescence (SSF) by using phthalic acid and piperazine as precursors. The prepared p-CDs can be obtained in high yield (48.7%) and emit bright yellow-green SSF under 365 nm UV light. The absolute PL quantum yield (PLQY) of p-CDs in solid state was measured to be 20.5%, which is much higher than that in aqueous solution. This interesting phenomenon shows that p-CDs not only successfully conquer the aggregation-caused fluorescence quenching (ACQ) effect, but also achieve enhanced fluorescence emission, which was rarely reported in previous literatures as CDs in solid state always reduce their fluorescence emission due to the excessive resonance energy transfer (RET) or direct π-π interactions. In addition, the relationship between the feed ratio of precursors and optical properties of the CDs were also investigated detailedly. Based on their strong SSF, the p-CDs were successfully used in rapid latent fingerprints detection and white light-emitting diodes (WLEDs) preparation with high quality. In summary, this research not only developed a new type of CDs with strong enhanced SSF, but also offered a valuable reference for design SSF-emitting CDs with high yield.
关键词： Carbon dots,Solid-state fluorescence,Light-emitting diodes,Latent fingerprints
更新于2025-11-14 17:04:02
-
Novel hole blocking materials based on 2,6-disubstituted dibenzo[ <i>b</i> , <i>d</i> ]furan and dibenzo[ <i>b</i> , <i>d</i> ]thiophene segments for high-performance blue phosphorescent organic light-emitting diodes
摘要： Novel hole blocking materials (HBMs) based on 2,6-disubstituted dibenzo[b,d]furan and dibenzo[b,d]thiophene segments, 3,30,300,30 0 0-(dibenzo[b,d]furan-2,6-diylbis(benzene-5,3,1-triyl))tetrapyridine (26DBFPTPy) and 3,30,300,30 0 0-(dibenzo[b,d]thiophene-2,6-diylbis(benzene-5,3,1-triyl))tetrapyridine (26DBTPTPy), are successfully designed and synthesized for high-performance blue phosphorescent organic light-emitting diodes (PhOLEDs) for the first time. Computational simulation is used to investigate the optimal structure, orbital distribution, and physicochemical properties of both molecules. Thermal, optical, and electrochemical analysis shows that 26DBFPTPy and 26DBTPTPy possess high thermal stability, deep HOMO energy levels ((cid:2)7.08 and (cid:2)6.91 eV), and a high triplet energy (ET) (2.75 and 2.70 eV). Blue PhOLEDs with 26DBFPTPy or 26DBTPTPy as a hole blocking layer (HBL) exhibit a low turn-on voltage (3.0 V) and operating voltage (4.5 V) at 1000 cd m(cid:2)2. In addition, the blue PhOLEDs with 26DBFPTPy or 26DBTPTPy show superior external quantum e?ciencies (24.1 and 23.6%) and power e?ciencies (43.9 and 42.7 lm W(cid:2)1). They also show a very small e?ciency roll-o? of about 8.5% from 100 to 1000 cd m(cid:2)2. Furthermore, they exhibit improved lifetimes compared to the similarly designed HBL with a pyridine electron transport unit and a phenyl core structure.
关键词： dibenzo[b,d]furan,hole blocking materials,dibenzo[b,d]thiophene,blue phosphorescent organic light-emitting diodes,high-performance
更新于2025-11-14 15:32:45