- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Activated carbon/metal-organic framework nanocomposite: Preparation and photocatalytic dye degradation mathematical modeling from wastewater by least squares support vector machine
摘要： Herein, Kiwi peel activated carbon (AC), Materials Institute Lavoisier (MIL-88B (Fe), and AC/MIL-88B (Fe) composite were synthesized and used as catalysts to degrade Reactive Red 198. The material properties were analyzed by the FTIR, BET-BJH, XRD, FESEM, EDX, TGA, and UV–Vis/DRS. The BET surface area of AC, MIL-88B (Fe) and AC/MIL-88B (Fe) was 1113.3, 150.7, and 199.4 m2/g, respectively. The band gap values (Eg) estimated by Tauc plot method, were obtained 5.06, 4.19 and 3.79 eV for AC, MIL-88B (Fe) and AC/MIL-88B (Fe), respectively. The results indicated that the AC/MIL-88B (Fe) composite had higher photocatalytic activity (99%) than that of pure AC (79%) and MIL-88B (Fe) catalysts (87%). The decolorization kinetic was matched well with the second-order model. Moreover, the data were modeled using least squares support vector machine which optimized with Cuckoo optimization algorithm. The optimal parameters were found 0.837 and 3.49e+02 based on σ2 and γ values, respectively. The mean square error (MSE) and correlation coefficient (R2) values were obtained 3.97 and 0.948. Therefore, the attained data, materials characterization and prediction of modeling validate the composite form of MIL-88B(Fe) with new AC, had better photocatalytic activity in comparison with the individual form.
关键词： Metal-organic frameworks (MOFs),Synthesis,AC/MIL-88B (Fe) composite,COA-LSSVM modeling,Photocatalytic degradation
更新于2025-09-23 15:23:52
-
Mixed-metal organic framework-coated ZnO nanowires array for efficient photoelectrochemical water oxidation
摘要： Designing of high-performance photoanodes is essential for efficient solar energy conversion in photoelectrochemical (PEC) water splitting. Herein, we report an effective approach to synthesize three dimensional (3D) mixed-metal organic framework-coated ZnO nanowires array (ZnNi MOF@ZnO) for the effective PEC performance. The ZnO nanowires act as photon absorber as well as rapid charge transporter; whilst the ZnNi MOF provides the active sites for PEC process by lowering the energy barrier of water oxidation and suppressing electron-hole recombination. The 3D nanostructure of ZnNi MOF@ZnO nanowires array provides intimate interfacial contact through covalent interactions between the ZnNi MOF and ZnO nanowires which facilitates the rapid charge transfer during photocatalytic oxygen evolution reactions. As a result, the ZnNi MOF@ZnO nanowires array exhibited excellent photoelectrochemical water oxidation with very low onset potential (0.31 V vs. RHE) and high photocurrent density (1.40 mA/cm2) as compared to the Zn MOF @ZnO and ZnO nanowires array. This facile strategy provides a promising direction towards high performance photoanode design for adequate solar energy conversion.
关键词： Metal organic frameworks (MOFs),Photoelectrocatalyst,Nanowires array,Photoelectrochemical water oxidation,Photoanodes
更新于2025-09-23 15:22:29
-
Ratiometric Luminescent Sensor of Picric Acid based on the Dual-Emission Mixed-Lanthanide Coordination Polymer
摘要： Powerful explosive sensors play a key role in public security and environmental protection. Herein we report a series of isostructural lanthanide coordination polymers [Ln2L1.5(NMP)2]n (LnL, Ln = Eu , Gd, Tb, Dy, Ho and Er, H4L = [1,1′:4′,1″-terphenyl]-2′,4,4″,5′-tetracarboxylic acid, NMP = N-methyl-2-pyrrolidone) and mixed-Ln LnL (EuxTb1-xL, EuxGd1-xL, TbxGd1-xL and EuxTb0.02-xGd0.98L). Luminescence studies show that both H4L and GdL emit strong fluorescence and phosphorescence at 77 K while only fluorescence at room temperature, and TbL exhibits strong Tb3+ characteristic emission though the energy difference between the triplet excited state of H4L (20661 cm-1) and the 5D4 energy level of Tb3+ (20500 cm-1) is very small. By doping Eu3+ and Tb3+ into GdL, we obtained EuxTb0.02-xGd0.98L emitting warm white light. For TbL and Tb0.01Gd0.99L showing the dual-emission, upon addition of picric acid (PA) into their suspensions in Tris-HCl buffer, Tb3+ emission decreases slowly, however, the ligand-based emission is sharply quenched, rendering TbL and Tb0.01Gd0.99L excellent single-lanthanide and mixed-lanthanide ratiometric luminescence PA sensor materials, respectively.
关键词： picric acid (PA),ratiometric luminescence sensors,white light emission,metal-organic frameworks (MOFs),Coordination polymers (CPs)
更新于2025-09-23 15:21:21
-
Self‐Assembly of Hybrid Oxidant POM@Cu‐BTC for Enhanced Efficiency and Long‐Term Stability of Perovskite Solar Cells
摘要： The controllable oxidation of spiro-OMeTAD and improving the stability of hole-transport materials (HTMs) layer are crucial for good performance and stability of perovskite solar cells (PSCs). Herein, we report an efficient hybrid framework material, (POM@MOF) [Cu2(BTC)4/3(H2O)2]6[H3PMo12O40]2 or POM@Cu-BTC, for the oxidation of spiro-OMeTAD with Li-TFSI and TBP. When POM@Cu-BTC is introduced to the HTM layer as a dopant, the PSCs achieve a superior fill factor of 0.80 and enhanced power conversion efficiency 21.44 %, as well as improved long-term stability in an ambient atmosphere without encapsulation. The enhanced performance is attributed to the oxidation activity of this POM anions and solid-state nanoparticles. Therefore, research presents a facile way by using hybrid porous materials to accelerate oxidation of spiro-OMeTAD, further improving the efficiency and stability of PSCs.
关键词： hole-transport materials,metal–organic frameworks (MOFs),polyoxometalates,perovskites,solar cells
更新于2025-09-11 14:15:04
-
Photoreduction of Carbon Dioxide to Methanol over Copper Based Zeolitic Imidazolate Framework-8: A New Generation Photocatalyst
摘要： The efficient reduction of CO2 into valuable products such as methanol, over metal-organic frameworks (MOFs) based catalyst, has received much attention. The photocatalytic reduction is considered the most economical method due to the utilization of solar energy. In this study, Copper (II)/Zeolitic Imidazolate Framework-8 (Cu/ZIF-8) catalysts were synthesized via a hydrothermal method for photocatalytic reduction of CO2 to methanol. The synthesized catalysts were characterized by X-ray Photoelectron Spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM) coupled with Energy Dispersive X-ray (EDX), Ultraviolet-visible (UV-vis) spectroscopy, and X-Ray Diffraction (XRD). The host ZIF-8, treated with 2 mmol copper prepared in 2M ammonium hydroxide solution showed the highest photocatalytic activity. The crystal structures of ZIF-8 and 2Cu/ZIF-8N2 catalysts were observed as cubic and orthorhombic, respectively and the XPS analysis confirmed the deposition of Cu (II) ions over ZIF-8 surface among all the prepared catalysts. The orthorhombic structure, nano-sized crystals, morphology and Cu loading of the 2Cu/ZIF-8N2 catalyst were the core factors to influence the photocatalytic activity. The yield of Methanol was found to be 35.82 μmol/L·g after 6 h of irradiations on 2Cu/ZIF-8N2 catalyst in the wavelength range between 530–580 nm. The copper-based ZIF-8 catalyst has proven as an alternative approach for the economical photocatalytic reduction of CO2 to CH3OH.
关键词： Cu/ZIF-8,photocatalytic CO2 reduction,methanol production,metal-organic frameworks (MOFs)
更新于2025-09-10 09:29:36