Laser polishing of tool steel using a continuous-wave laser assisted by a steady magnetic field

摘要： Continuous-wave (CW) lasers are widely used in laser polishing, but with CW laser polishing, it is difficult to reduce the surface roughness to 0.2 μm from an original value exceeding 1.0 μm. The aim of this study is to develop an innovative method of laser polishing assisted by a steady magnetic field to overcome that bottleneck and produce smoother surfaces. Two experiments confirm the hypothesis that the molten pool overflows during melting peaks to flow into valleys in CW laser polishing, resulting in secondary roughness that causes the aforementioned quality bottleneck. To either reduce or eliminate this secondary roughness, a steady magnetic field is used during CW laser polishing to suppress the overflow of the molten pool. A three-dimensional surface profiler, a scanning electron microscope, and a nanometer indentation tester are used to characterize and analyze the microstructure and properties of the materials. The experimental results show that the Lorentz force due to the steady magnetic field plays an important suppression role in reducing the secondary roughness.