- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Investigation of Surface Plasmon Resonance (SPR) in MoS2- and WS2-Protected Titanium Side-Polished Optical Fiber as a Humidity Sensor
摘要： In this paper, we report the effects of a side-polished fiber (SPF) coated with titanium (Ti) films in different thicknesses, namely 5 nm, 13 nm, and 36 nm, protected by a thin layer of transition metal dichalcogenides (TMDCs) such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2), which provide ultra-sensitive sensor-based surface plasmon resonance (SPR) covering from the visible to mid-infrared region. The SPF deposited with Ti exhibits strong evanescent field interaction with the MoS2 and WS2, and good optical absorption, hence resulting in high-sensitivity performance. Incremental increases in the thickness of the Ti layer contribute to the enhancement of the intensity of transmission with redshift and broad spectra. The findings show that the optimum thickness of Ti with 36 nm combined with MoS2 causes weak redshifts of the longitudinal localized surface plasmon resonance (LSPR) mode, while the same thickness of Ti with WS2 causes large blueshifts. The redshifts are possibly due to a reduced plasmon-coupling effect with the excitonic region of MoS2. The observed blueshifts of the LSPR peak position are possibly due to surface modification between WS2 and Ti. Changing the relative humidity from 58% to 88% only elicited a response in Ti/MoS2. Thus, MoS2 shows more sensitivity on 36-nm thickness of Ti compared with WS2. Therefore, the proposed fiber-optic sensor with integration of 2D materials is capable of measuring humidity in any environment.
关键词： tungsten disulfide (WS2),side-polished fiber (SPF),molybdenum disulfide (MoS2)
更新于2025-11-28 14:23:57
-
Band Alignment of MoTe <sub/>2</sub> /MoS <sub/>2</sub> Nanocomposite Films for Enhanced Nonlinear Optical Performance
摘要： Band alignment is a key issue for the optoelectronics based on 2D layered transition metal dichalcogenides (TMDs) heterostructures. Herein, band alignment of MoTe2/MoS2 mixed heterostructure is measured with high-resolution X-ray photoelectron spectroscopy. The MoTe2/MoS2 heterostructure belongs to type-II heterostructure with the conduction band offset of 0.46 eV and the valence band offset of 0.9 eV. The stronger saturable absorption is observed in MoTe2/MoS2 heterostructure film compared with that of pure MoTe2 and MoS2 nanofilms at the same condition. An energy-level model combined with Runge–Kutta algorithm is used to understand the enhancement mechanism. It is found that the interlayer transition from MoTe2/MoS2 heterojunction plays an important role in the nonlinear optical enhancement. Meanwhile, band structure of MoTe2/MoS2 heterostructure is calculated by the first principles. The contributions of the MoTe2 and MoS2 to the heterojunction are almost equal and the valence band maximum and conduction band minimum exist in MoTe2 and MoS2 separately. This structure can form the interlayer carriers easily. The results suggest that the band alignment of TMDs paves the way for the type-II heterostructure for enhanced nonlinear response in the development of optical modulator, ultrafast laser mode lockers, saturable absorbers, and optical switches.
关键词： molybdenum disulfide (MoS2),band alignment,saturable absorption,heterostructure,molybdenum telluride (MoTe2)
更新于2025-09-23 15:23:52
-
DNA origami deposition on native and passivated molybdenum disulfide substrates
摘要： Maintaining the structural fidelity of DNA origami structures on substrates is a prerequisite for the successful fabrication of hybrid DNA origami/semiconductor-based biomedical sensor devices. Molybdenum disulfide (MoS2) is an ideal substrate for such future sensors due to its exceptional electrical, mechanical and structural properties. In this work, we performed the first investigations into the interaction of DNA origami with the MoS2 surface. In contrast to the structure-preserving interaction of DNA origami with mica, another atomically flat surface, it was observed that DNA origami structures rapidly lose their structural integrity upon interaction with MoS2. In a further series of studies, pyrene and 1-pyrenemethylamine, were evaluated as surface modifications which might mitigate this effect. While both species were found to form adsorption layers on MoS2 via physisorption, 1-pyrenemethylamine serves as a better protective agent and preserves the structures for significantly longer times. These findings will be beneficial for the fabrication of future DNA origami/MoS2 hybrid electronic structures.
关键词： atomic force microscopy (AFM),molybdenum disulfide (MoS2),1-pyrenemethylamine,pyrene,DNA origami,surface modification
更新于2025-09-23 15:22:29
-
Molybdenum Disulfid: Differentiating Polymorphs in Molybdenum Disulfide via Electron Microscopy (Adv. Mater. 47/2018)
摘要： The presence of rich polymorphs and stacking polytypes in molybdenum disulfide (MoS2) endows it with a diverse range of properties. This has stimulated a lot of interest in the unique properties associated with each polymorph. In article number 1802397, Kian Ping Loh and co-workers discuss the use of electron microscopy for identifying the atomic structures of several important polymorphs in MoS2 and establishing the correlation between structure and properties.
关键词： polymorphs,electron microscopy,stacking polytypes,molybdenum disulfide,MoS2
更新于2025-09-09 09:28:46
-
Low-Temperature Process for Direct Formation of MoS2 Thin Films on Soda-Lime Glass Substrates
摘要： To obtain molybdenum disulfide (MoS2) patterns without any mechanical problems caused by the transfer process, direct current (DC) sputtering and rapid thermal processing (RTP) were used to form MoS2 instead of the conventional chemical vapor deposition (CVD) process. To form MoS2 on a soda-lime glass substrate at temperatures below 600 °C, MoS2 films were deposited at various DC sputtering powers and annealed at various temperatures from 400 °C to 550 °C. From the scanning electron microscope (SEM) and atomic force microscope (AFM) results, the surface morphologies of the MoS2 films can be observed, depending on the sputtering power and the film thickness. The Raman spectrum results showed that the E1 2g and A1 g mode peaks appeared at approximately 372 cm?1 and 400 cm?1, respectively, and the MoS2 surface was crystallized in the in-plane direction. The X-ray photoelectron spectroscopy (XPS) results showed noticeable S 2p (2p 1/2, 2p 3/2) peaks and Mo 3d (3d 3/2, 3d 5/2) peaks at stable binding energies after RTP at temperatures below 600 °C. The high mobilities and carrier densities of all the MoS2 films can be investigated from the Hall measurements.
关键词： DC Sputtering,Low Temperature,Molybdenum Disulfide (MoS2),Rapid Thermal Processing (RTP),Soda-Lime Glass
更新于2025-09-04 15:30:14