- 标题
- 摘要
- 关键词
- 实验方案
- 产品
过滤筛选
- 2019
- 2018
- PIN diode
- reconfigurable structure
- Active frequency selective surface (AFSS)
- multifunctional AFSS (MAFSS)
- label-free detection
- biosensor
- Bloch surface wave
- 1D photonic crystal
- surface wave enhanced fluorescence
- Infrared Thermography
- Optoelectronic Information Science and Engineering
- Materials Science and Engineering
- Optoelectronic Information Materials and Devices
- Ufa State Aviation Technical University
- Chung-Ang University
- BMS College of Engineering
- Fraunhofer Institute for Applied Optics and Precision Engineering IOF
- Sapienza University
- Majmaah University
- Karnataka Institute of Endocrinology and Research (KIER)
- Islamic Azad University
- Aerospace Research Institute
- Tehran University
-
Insights into the improved photocatalytic performance of fluorine surface modified mpg-C3N4 at room temperature under aqueous conditions
摘要： A novel fluorine surface modified mesoporous carbon nitride (mpg-C3N4) photocatalysts were synthesized by etching SiO2 with NH4HF2. The mechanism of formation and the factors that affect its photocatalytic activity were investigated. Interestingly, the introduction of F atoms improves the performance of surface state and widens the energy band gap of surface-modified mpg-C3N4 due to the higher separation and efficient mobility of the photoinduced carriers. Consequently, the fluorine-modified mpg-C3N4 exhibits higher carrier lifetime (8.64 ns) than mpg-C3N4 (7.14 ns), which improves the photocatalytic efficiency under ultraviolet light. The enhanced photocatalytic activity was evaluated by studying the degradation experiments of Rhodamine B. It is expected that the present fluorine modification at the surface of mpg-C3N4 may provide new insights in basic research and energy conversion.
关键词： fluorine surface modification,mpg-C3N4,room temperature,photocatalyst
更新于2025-11-14 15:28:36
-
A Facile Approach for Fabricating Microstructured Surface Based on Etched Template by Inkjet Printing Technology
摘要： Microstructures are playing an important role in manufacturing functional devices, due to their unique properties, such as wettability or ?exibility. Recently, various microstructured surfaces have been fabricated to realize functional applications. To achieve the applications, photolithography or printing technology is utilized to produce the microstructures. However, these methods require preparing templates or masks, which are usually complex and expensive. Herein, a facile approach for fabricating microstructured surfaces was studied based on etched template by inkjet printing technology. Precured polydimethylsiloxane substrate was etched by inkjet printing water-soluble polyacrylic acid solution. Then, the polydimethylsiloxane substrate was cured and rinsed, which could be directly used as template for fabricating microstructured surfaces. Surfaces with raised dots, lines, and squares, were facilely obtained using the etched templates by inkjet printing technology. Furthermore, controllable anisotropic wettability was exhibited on the raised line microstructured surface. This work provides a ?exible and scalable way to fabricate various microstructured surfaces. It would bring about excellent performance, which could ?nd numerous applications in optoelectronic devices, biological chips, microreactors, wearable products, and related ?elds.
关键词： inkjet printing,microstructured surface,anisotropic wettability,etched template
更新于2025-11-14 15:27:09
-
Promoting Photoreduction Properties via Synergetic Utilization between Plasmonic Effect and Highly Active Facet of BiOCl
摘要： Exploring highly efficient photocatalysts is an urgent task for achieving efficient solar-to-chemical conversion. Plasmonic effect is widely used in improving the photocatalytic properties via reducing the activation barrier for chemical reactions, enhancing the absorption of the photocatalysts or injecting the hot carriers into the photocatalysts from the plasmon metals. In this work, we design BiOCl-Ag-E with Ag loaded on the edge side of BiOCl. This hybrid structure takes the advantages of highly photocatalytic active (001) facet of BiOCl and the plasmonic effect. The plasmon metal is proposed to provide the (001) facets with more photogenerated charge carriers driving by the internal electric field, which is convinced by the photocurrent response and the detection of active species. Due to the accumulation of more negative charge carriers on (001) facet, BiOCl-Ag-E presents outstanding waste-water cleaning and CO2 photoreduction properties. The methodology of material design in this work paves the way for future design of efficient photocatalysts.
关键词： photocatalyst,synergy effect,surface plasmon resonance,CO2 photoreduction,selective growth
更新于2025-11-14 15:27:09
-
Synthesis, characterization, optical and electrochemical band gaps of green poly(azomethine-ester)s containing oxalyl and succinyl units
摘要： A new series of poly(azomethine-ester)s (PAZ-E)s with different (turning ortho, meta and para) positions were synthesized by condensation polymerization. The chemical structure of polymers was veri?ed by 1H-NMR, 13C-NMR, FTIR and UV–Vis measurements. Electrochemical characteristics of the corresponding polymers were obtained with cyclic voltammetric (CV) analysis. Thermal characteristics of the obtained polymers were analysed by TG-DTA, DMA and DSC measurements. The ?rst degradation temperature values of PAZ-E compounds were found between 198 and 250?C from TGA measurements. Photophysical characteristics of the obtained polymers were explained with photoluminescence (PL) spectroscopy. Molecular weight distributions of (PAZ-E)s were obtained by gel permeation chromatographic (GPC) analysis. Two- and three-dimensional (2D and 3D) properties and images of the synthesized (PAZ-E)s were analysed by SEM and AFM surface analysis techniques, respectively. Electrochemical band gap (E g) values of (PAZ-E)s P-9, P-10, P-11, P-12, P-13 and P-14 were calculated as 2.58, 2.14, 1.90, 2.06, 1.89 and 1.69 eV, respectively. The E g values of the (PAZ-E)s were found to be quite low.
关键词： surface morphologies,Poly(azomethine-ester),electrochemical properties,photophysical behaviour,schiff base,thermal degradation
更新于2025-11-14 15:26:12
-
The Self-Assembly of Cu-In-S Quantum Dots with Aggregation-Induced Emission into 3D Network Triggered by Cation and Its Application as A Novel Metal-Enhanced Fluorescent Nanosensor for Detecting Zn (Ⅱ)
摘要： A novel self-assembly phenomenon triggered by Zn2+ of Cu-In-S quantum dots with aggregation-induced emission effect was presented in this paper. Hydrophilic Cu-In-S quantum dots with aggregation-induced emission effect were successfully prepared. They were monodisperse spherical nanoparticles with the diameter of 2.8 ± 0.4 nm and had weak fluorescence in aqueous solution. However, the solution emitted strong fluorescence after addition of Zn2+. The results of TEM and SEM indicated the monodisperse quantum dots self-assembled into 3D networks of Cu-In-S quantum dots-Zn2+, which hindered the motion of quantum dots. Besides, the Zn2+ in the mixture passivated the surface defects. The phenomenon also proved by florescence lifetime and XPS. Thus the radiation decay decreased and followed by strong fluorescent emission. Interestingly, the degree of aggregation was proportional to the amount of Zn2+ and the fluorescent intensity. Based on this interesting phenomenon, a novel metal enhanced fluorescent nanosensor for detecting Zn2+ was established. The results demonstrated the proposed method had a good selectivity and linearity in the concentration range of 0-800 nmol?L-1 with a limit of detection of 1.99 ppb. These results showed a promising future in the field of metal-enhanced fluorescent probes of the Cu-In-S quantum dots.
关键词： Surface defects,Metal-enhanced sensor,Quantum dots,Restriction of motion,Aggregation-induced emission
更新于2025-11-14 15:23:50
-
Ambient surface stability of thin film nanocrystalline Cu <sub/>3</sub> SbSe <sub/>4</sub> and structure-property relationships
摘要： Nanocrystalline materials have a high surface area, and hence may be significantly more reactive than their bulk counterparts under ambient conditions. This may affect device function in unexpected ways. Here, high quality crystalline Cu3SbSe4 nanocrystals are synthesized through a hot injection route, and thin films are deposited through a ligand exchange procedure. The electronic conductivity of the films increases significantly upon exposure to air, up to 80 Ω-1cm-1. This increase in conductivity is correlated to a surface oxidation as observed by XPS. The observed changes in the film upon exposure to ambient conditions are suggested to be critical for understanding the properties of these materials as they are incorporated into devices.
关键词： surface oxidation,earth abundant,copper antimony chalcogenides,hot injection,Thermoelectrics,nanoparticles
更新于2025-11-14 15:19:41
-
Non-enzymatic sensing of dopamine by localized surface plasmon resonance using carbon dots-functionalized gold nanoparticles
摘要： A highly selective, sensitive, and rapid colorimetric sensor for the determination of dopamine (DA) was developed using the color change of S-doped carbon dots functionalized gold nanoparticles (S-CDs@Au NPs). The base of the method is the formation of a complex between the amine groups of dopamine with carboxylic groups of S-CDs@Au NPs followed by their aggregation with Fe3+ ions which acts as the linkers causing a red shift from 520 to 670 nm in the localized surface plasmon peak of S-CDs@Au NPs. The ratio of absorbance intensity at 670 nm to 520 nm was monitored as the analytical signal for determination of dopamine. The parameters affecting the analytical signal including reaction time, solution pH, the concentration of Au NPs and concentration of Fe3+ were optimized. At optimized conditions, the calibration curve was linear in the concentration range of 0.81-16.80 μM of dopamine. The detection and quantification limits were 0.23 μM and 0.77 μM, respectively. The intra-day and inter-day relative standard deviation (RSDs) at 5.0 μM of DA were 3.9% and 5.6%, respectively (n = 5). The applicability of the method for determination of DA in dopamine ampoule, urine and serum human samples was investigated.
关键词： Carbon dots,Localized surface plasmon resonance,Colorimetric chemical sensor,Dopamine,Gold nanoparticles
更新于2025-11-14 15:18:02
-
Near-infrared (NIR) surface-enhanced Raman spectroscopy (SERS) study of novel functional phenothiazines for potential use in dye sensitized solar cells (DSSC)
摘要： Near-infrared (NIR) surface-enhanced Raman spectroscopy (SERS) is used to investigate the interaction between six novel phenothiazine-merocyanine dyes containing the three different functional groups rhodanine, 1,3-indanedione and cyanoacylic acid with plasmonic nanomaterials, to decide if the incorporation of plasmonic nanoparticles could enhance the efficiency of a Gr?tzel-type solar cell. The studies were carried out in the solution state using spherical and rod-shaped gold nanostructures. With KCl induced agglomerated spherical gold nanoparticles, forming SERS hot spots, the results showed low detection limits between 0.1 mmol L?1 for rhodanine containing phenothiazine dyes, because of the formation of Au–S bonds and 3 mmol L?1 for cyanoacrylic acid containing dyes, which formed H-aggregates in the watery dispersion. Results with gold nanorods showed similar trends in the SERS measurements with lower limits of detection, because of a shielding effect from the strongly-bound surfactant. Additional fluorescence studies were carried out to determine if the incorporation of nanostructures leads to fluorescence quenching. Overall we conclude that the addition of gold nanoparticles to rhodanine and 1,3-indanedione containing phenothiazine merocyanine dyes could enhance their performance in Gr?tzel-type solar cells, because of their strong interactions with plasmonic nanoparticles.
关键词： surface-enhanced Raman spectroscopy,plasmonic nanoparticles,dye sensitized solar cells,phenothiazine-merocyanine dyes,Near-infrared
更新于2025-11-14 15:16:37
-
Oxygen-vacancies-engaged efficient carrier utilization for the photocatalytic coupling reaction
摘要： Defects can greatly optimize the solar light harvesting capability and electronic structure of oxide materials. However, it remains challenging to achieve a defect engineering strategy under mild conditions. Meanwhile, the simultaneous exploitation of photogenerated holes (h+) and electrons (e?) to promote both photooxidation and photoreduction in a coupled system has rarely been reported. For the first time, we reveal an oxygen-vacancies-mediated photocatalytic strategy in which the electrons and holes are fully utilized for nitrobenzene reduction coupled with benzyl alcohol oxidation. The oxygen vacancies (OVs) generated in situ on the surface of TiO2 greatly extend light absorption into the visible region and promote the photogenerated electron transport for efficient photocatalysis. The experimental and theoretical results together indicate that chemisorption on the TiO2 surface decreases the oxidation potential of benzyl alcohol and causes an upward shift in its HOMO, which facilitates the oxidation reaction of benzyl alcohol to benzaldehyde. The in situ generated surface OVs also act as a bridge to enable the trapping and transferring of the photoinduced electrons to the nitrobenzene. This work provides a new perspective of utilizing the chemisorption between the reactant and catalyst to achieve a defect engineering strategy for synergetic photocatalysis.
关键词： Photocatalysis,Photoreduction,Surface complexation,Oxygen vacancies,Photooxidation
更新于2025-11-14 14:48:53
-
Double- and Multi-Femtosecond Pulses Produced by Birefringent Crystals for the Generation of 2D Laser-Induced Structures on a Stainless Steel Surface
摘要： Laser-induced textures have been proven to be excellent solutions for modifying wetting, friction, biocompatibility, and optical properties of solids. The possibility to generate 2D-submicron morphologies by laser processing has been demonstrated recently. Employing double-pulse irradiation, it is possible to control the induced structures and to fabricate novel and more complex 2D-textures. Nevertheless, double-pulse irradiation often implies the use of sophisticated setups for modifying the pulse polarization and temporal profile. Here, we show the generation of homogeneous 2D-LIPSS (laser-induced periodic surface structures) over large areas utilizing a simple array of birefringent crystals. Linearly and circularly polarized pulses were applied, and the optimum process window was defined for both. The results are compared to previous studies, which include a delay line, and the reproducibility between the two techniques is validated. As a result of a systematic study of the process parameters, the obtained morphology was found to depend both on the interplay between fluence and inter-pulse delay, as well as on the number of incident pulses. The obtained structures were characterized via SEM (scanning electron microscopy) and atomic force microscopy. We believe that our results represent a novel approach to surface structuring, primed for introduction in an industrial environment.
关键词： metal surface texturing,2D-LIPSS,femtosecond,micro/nanostructuring,birefringent crystals,double pulses
更新于2025-11-14 14:32:36