- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Enhanced charge extraction in carbon-based all-inorganic CsPbBr3 perovskite solar cells by dual-function interface engineering
摘要： Carbon-based all-inorganic CsPbBr3 perovskite solar cells (PSCs) have attracted growing interests due to low cost and excellent tolerances toward moisture, temperature, oxygen and ultraviolet light. However, carrier recombination of CsPbBr3 film and large energy level differences at CsPbBr3/carbon interface are still the most crucial problem for further enhancement of power conversion efficiency. In the current study, an intermediate energy level at CsPbBr3/carbon interface and CsPbBr3 film passivation are employed by coating hexane solution of CsPbBrxI3-x nanocrystals (NCs) on the perovskite layer. Through systematic study on interfacial engineering, it is found that CsPbBrxI3-x NCs with tunable energy level can remarkably reduce energy loss and hexane under passivation treatment can enlarge perovskite grain size as well as reduce trap state density. A champion power conversion efficiency of 9.45% is achieved for CsPbI3 NCs tailored all-inorganic CsPbBr3 PSC in comparison with 5.26% for NCs-free device, with the unencapsulated carbon-based CsPbBr3 PSC exhibiting remarkable long-term stability over 900 h in 80% relative humidity air atmosphere at 25 °C. This work provides an effective approach to promote charge extraction and reduce defect states density as well as enhance the performance of PSCs.
关键词： CsPbBrxI3-x nanocrystals,Interface engineering,Charge extraction,Solvent treatment,All-inorganic CsPbBr3 perovskite solar cells
更新于2025-09-19 17:13:59
-
Universal defects elimination for high performance thermally evaporated CsPbBr3 perovskite solar cells
摘要： Inorganic CsPbBr3 perovskite has emerged as a promising material for fabricating highly stable perovskite solar cell devices. However, during the formation of thermally evaporated CsPbBr3 film, an all-solid reaction between CsBr and PbBr2 leads to non-uniform interfaces and high defect density in the perovskite film. In this work, we utilize a two-step sintering (TSS) method which successfully modifies the morphologies of thermally evaporated CsPbBr3 films and the power conversion efficiency of a champion CsPbBr3 perovskite solar cell achieves 9.35%. Steady-state photoluminescence, time-resolved photoluminescence and space-charge-limited-current results prove that the TSS process can effectively reduce defect densities also. Besides these improvements, the TSS device maintains 94% of initial efficiency after being heated at 100°C without encapsulation for over 40 days under ambient lab condition. In comparison, the untreated device reduces about 15%. Transmission electron microscope results further prove the reduction of line defects in CsPbBr3 crystals after TSS treatment.
关键词： Two-step sintering,Defects elimination,Thermal evaporation method,All-inorganic CsPbBr3 perovskite solar cells
更新于2025-09-11 14:15:04