- 标题
- 摘要
- 关键词
- 实验方案
- 产品
过滤筛选
- 2019
- 7nm silicon node
- chip-package interaction
- laser assisted bonding
- quick temperature cycling test
- mass reflow
- embedded trace substrate
- hammer test
- Electronic Science and Technology
- MediaTek, Inc.
- JCET STATS ChipPAC Pte. Ltd.
-
Ultrahigh Resolution Pulsed Laser-Induced Photoacoustic Detection of Multi-Scale Damage in CFRP Composites
摘要： This paper presents a photoacoustic non-destructive evaluation (pNDE) system with an ultrahigh resolution for the detection of multi-scale damage in carbon fiber-reinforced plastic (CFRP) composites. The pNDE system consists of three main components: a picosecond pulsed laser-based ultrasonic actuator, an ultrasound receiver, and a data acquisition/computing subsystem. During the operation, high-frequency ultrasound is generated by pulsed laser and recorded by an ultrasound receiver. By implementing a two-dimensional back projection algorithm, pNDE images can be reconstructed from the recorded ultrasound signals to represent the embedded damage. Both potential macroscopic and microscopic damages, such as surface notches and delamination in CFRP, can be identified by examining the reconstructed pNDE images. Three ultrasonic presentation modes including A-scan, B-scan, and C-scan are employed to analyze the recorded signals for the representation of the detected micro-scale damage in two-dimensional and three-dimensional images with a high spatial resolution of up to 60 μm. Macro-scale delamination and transverse ply cracks are clearly visualized, identifying the edges of the damaged area. The results of the study demonstrate that the developed pNDE system provides a non-destructive and robust approach for multi-scale damage detection in composite materials.
关键词： composites,non-destructive testing,photoacoustic,multi-scale,ultrasonic representation,embedded damage
更新于2025-09-19 17:13:59
-
Self-Assembled Monolayers with Embedded Dipole Moments for Work Function Engineering of Oxide Substrates
摘要： Self-assembled monolayers (SAMs) are frequently used for work function (WF) engineering of different materials. For this, typically dipolar groups are attached to the molecule terminus at the SAM?ambient interface, which also influences its chemistry. WF engineering and interface chemistry can, however, be decoupled from one another using embedded dipolar groups, as has been demonstrated before for thiolate SAMs on metals. Herein, we extend this concept to oxide substrates. For this, a series of biphenyl-based molecules with a phosphonic acid (PA) anchoring group was synthesized, with one of the nonpolar phenyl units exchanged for a polar pyrimidine moiety, the dipole moment of which is oriented either toward (“down”) or away (“up”) to/from the PA group and, consequently, to/from the substrate. SAMs of these molecules formed on indium tin oxide (ITO), a frequently used and application-relevant oxide substrate, feature a uniform molecular configuration, dense molecular packing, and an upright molecular orientation. These SAMs exhibit pronounced electrostatic effects associated with the embedded dipolar groups, viz. shifts of the characteristic peaks in the C 1s X-ray photoelectron spectra and WF variations. The latter values were found to be 3.9, 4.85, and 4.4 eV for the up, down, and nonpolar reference SAM-engineered ITO, respectively. Consequently, these SAMs can serve as a powerful tool to monitor WF engineering effects in a variety of device assembles, decoupling these effects from the interface chemistry. The comparably low WF value for the up SAM is particularly important since it extends a rather limited variety of SAMs capable of lowering the WF of ITO.
关键词： Phosphonic acid,Self-assembled monolayers,Work function engineering,Embedded dipolar groups,Indium tin oxide,Oxide substrates
更新于2025-09-19 17:13:59
-
AIP Conference Proceedings [AIP Publishing RENEWABLE ENERGY SOURCES AND TECHNOLOGIES - Tamil Nadu, India (14–15 March 2019)] RENEWABLE ENERGY SOURCES AND TECHNOLOGIES - Design and simulation of developed embedded Z-source inverter for photovoltaic interface
摘要： This paper presents the implementation of Embedded Switched Z Source Inverter (ES-ZSI) using photovoltaic interface. Lesser passive elements are required in ES-ZSI with reference to the conventional Z-source inverter. Buck boost operation can be simulated in ES-ZSI, and it is interfaced with PV module. The shorting of the inverter leg is resolved adding to the high output voltage gain of the inverter. Various modes of operation are evaluated and their results are simulated using MatLab. Eventually, simulation study of the complete system is presented for both buck and boost state in ES-ZSI and their results are validated experimentally.
关键词： MatLab,PV module,Embedded switched Z-source inverter
更新于2025-09-16 10:30:52
-
A comparison of arrangements for increasing self-consumption and maximising the value of distributed photovoltaics on apartment buildings
摘要： As subsidised feed-in-tariffs for distributed photovoltaic (PV) generation are reduced or abolished in many jurisdictions, there is growing interest in increasing self-consumption to realise greater value from rooftop PV generation. However, deployment of PV on apartment buildings lags behind other residential deployment despite the potential advantages of load aggregation. We present a study of electricity and financial flows in ten ‘virtual’ Australian apartment buildings under a range of technical implementations and financial arrangements, using real load profiles and simulated generation profiles. Aggregation of diverse household and shared loads, either through an embedded network or ‘behind the meter’ of individual dwellings, can increase self-sufficiency and self-consumption of on-site generation compared to separate systems supplying common property or individual apartments. While embedded networks can enable access to more beneficial retail arrangements, behind the meter solutions may allow residents to avoid regulatory complexities and additional costs. The relative benefits of each arrangement are dependent on building characteristics and financial settings.
关键词： Load aggregation,Apartments,Self-consumption,Embedded network,Residential electricity,Photovoltaics
更新于2025-09-16 10:30:52
-
4-Mercaptobenzoic Acid Labeled Gold-Silver-Alloy-Embedded Silica Nanoparticles as an Internal Standard Containing Nanostructures for Sensitive Quantitative Thiram Detection
摘要： In this study, (4-mercaptobenzoic acid labeled SiO2@Au@4-MBA@Ag gold-silver-alloy-embedded silica nanoparticles) nanomaterials were investigated for the detection of thiram, a pesticide. First, the presence of Au@4-MBA@Ag alloys on the surface of SiO2 was confirmed by the broad bands of ultraviolet-visible spectra in the range of 320–800 nm. The effect of the 4-MBA (4-mercaptobenzoic acid) concentration on the Ag shell deposition and its intrinsic SERS (surface-enhanced Raman scattering) signal was also studied. Ag shells were well coated on SiO2@Au@4-MBA in the range of 1–1000 μM. The SERS intensity of thiram-incubated SiO2@Au@4-MBA@Ag achieved the highest value by incubation with 500 μL thiram for 30 min, and SERS was measured at 200 μg/mL SiO2@Au@4-MBA@Ag. Finally, the SERS intensity of thiram at 560 cm?1 increased proportionally with the increase in thiram concentration in the range of 240–2400 ppb, with a limit of detection (LOD) of 72 ppb.
关键词： gold–silver-alloy-embedded silica nanoparticles,internal standard,thiram,ultrasensitive detection
更新于2025-09-16 10:30:52
-
Atomistic kinetic Monte Carloa??Embedded atom method simulation on growth and morphology of Cua??Zna??Sn precursor of Cu <sub/>2</sub> ZnSnS <sub/>4</sub> solar cells
摘要： An atomistic kinetic Monte Carlo coupled with the embedded-atom method is used to simulate film growth and morphology evolution of a Cu–Zn–Sn precursor of Cu2ZnSnS4 solar cells by single-step electrodeposition. The deposition and diffusion events of three different metallic atoms are described by the simulation. Moreover, the multibody Cu–Zn–Sn potential is used to calculate diffusion barrier energy. The effects of process factors, including temperature and electrode potential, on the cross-section morphology and surface roughness are explored, while keeping the elemental composition ratios constant. The lowest roughness with the smoothest morphology is obtained at the optimal parameters. The distribution and transformation behaviors of cluster sizes are investigated to describe the alloy film growth process. Furthermore, the comparison between deposition events and diffusion events reveals that deposition events depend primarily on individual deposition rates of different metallic atoms, but diffusion events are mainly dependent on the interaction of metallic atoms. The film morphology evolution is visualized by three-dimensional configuration with increasing numbers of atoms, which suggests a competing mechanism between nucleation and growth of the thin film alloy.
关键词： Cu–Zn–Sn precursor,film growth,Cu2ZnSnS4 solar cells,electrodeposition,atomistic kinetic Monte Carlo,morphology evolution,embedded-atom method
更新于2025-09-16 10:30:52
-
[IEEE 2019 Innovations in Power and Advanced Computing Technologies (i-PACT) - Vellore, India (2019.3.22-2019.3.23)] 2019 Innovations in Power and Advanced Computing Technologies (i-PACT) - Photovoltaic supplied push pull converter for wireless power transfer applications
摘要： Embedded software is at the core of current and future telecommunication, automotive, multimedia, and industrial automation systems. The success of practically any industrial application depends on the embedded software system’s dependability, and one method to verify the dependability of a system is testing its robustness. The motivation behind this paper is to provide a knowledge base of the state of the practice in robustness testing of embedded software systems and to compare this to the state of the art. We have gathered the information on the state of the practice in robustness testing from seven different industrial domains (telecommunication, automotive, multimedia, critical infrastructure, aerospace, consumer products, and banking) by conducting 13 semi-structured interviews. We investigate the different aspects of robustness testing, such as the general view of robustness, relation to requirements engineering and design, test execution, failures, and tools. We highlight knowledge from the state of the practice of robustness testing of embedded software systems. We found different robustness testing practices that have not been previously described. This paper shows that the state of the practice, when it comes to robustness testing, differs between organizations and is quite different from the state of the art described in the scienti?c literature. For example, methods commonly described in the literature (e.g., the fuzzy approach) are not used in the organizations we studied. Instead, the interviewees described several ad hoc approaches that take speci?c scenarios into account (e.g., power failure or overload). Other differences we found concern the classi?cation of robustness failures, the hypothesized root causes of robustness failures, and the types of tools used for robustness testing. This paper is a ?rst step in capturing the state of the practice of robustness testing of embedded software systems. The results can be used by both researchers and practitioners. Researchers can use our ?ndings to understand the gap between the state of the art and the state of the practice and develop their studies to ?ll this gap. Practitioners can also learn from this knowledge base regarding how they can improve their practice and acquire other practices.
关键词： interviews,robustness,state of the practice,Testing,state of the art,survey,embedded systems
更新于2025-09-16 10:30:52
-
[IEEE 2019 41st Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC) - Berlin, Germany (2019.7.23-2019.7.27)] 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) - A prototype system of portable laser speckle imager based on embedded graphics processing unit platform
摘要： Laser speckle contrast imaging (LSCI) is a high-resolution full-field optical technique for measuring blood flow, which has been widely used in clinical and biomedical research. However, most of the current LSCI instruments are bulky, limiting their application settings. In this work, we proposed a prototype system of portable laser speckle imager. Different from the desktop laser speckle systems that utilize personal computer (PC), our system was designed with embedded GPU system (Jetson TX2, NVIDIA, USA) and a LCD touch screen (16.5 × 12.4 cm in size, 380 g in weight). In-vivo experiments showed that the portable GPU-based system had comparable performance with our laboratory LSCI system. Such a portable LSCI imager could be potentially used in a situation that requires for easy operation and installation, such as intraoperative monitoring or bedside diagnosis.
关键词： Laser speckle contrast imaging,portable,blood flow,embedded GPU,real-time monitoring
更新于2025-09-12 10:27:22
-
Low-cost solution of LED driving, designed for tunable white lighting systems
摘要： Aiming at increased lighting comfort, new types of light fixtures may currently be seen that may not only be dimmed, but can also adjust the temperature of the light. The ability to adjust the brightness and color temperature is not only supposed to create a pleasant atmosphere, but it may also have a positive effect on human organism, especially if luminaries can be controlled to get as close as possible to the dynamics of natural light. The change in color temperature is known to affect the production of the melatonin hormone in the human body. This capacity is especially useful in situations where we need to increase the alertness of people working at night and thus increase their performance when carrying out certain tasks. This paper deals with the design of a low-cost solution for the power supply units of LED light fittings able to adjust the brightness and temperature of light aiming to achieve the best electrical parameters. While working on the design, the possibility of adding other electronic components to the power supply was considered, which would further increase its usefulness in the future. Experimental results of the power supply efficiency measurements for different control frequencies are presented.
关键词： Embedded Systems,Communication for Control Systems,Microprocessors and Microcontrollers,Building and home automation
更新于2025-09-12 10:27:22
-
Embedding electronics into additive manufactured components using laser metal deposition and selective laser melting
摘要： The paper deals with the integration of a light emitting diode (LED) into an additive manufactured metal component. Selective laser melting (SLM) and laser metal deposition (LMD) are used. The material used is the chrome-nickel steel 316L. The basic component is manufactured by means of SLM and consists of a solid body and an area with grid structure. The solid body includes a duct in the shape of a groove with a recess for the positioning of the power cable. The LED is embedded in the grid structure via an inlet from the solid body. In further processing, the groove is filled with LMD. Two strategies with different parameter combinations were investigated. It shows that a high energy input near the power cable leads to its destruction. By using multiple parameter combinations during the manufacturing process, this destruction can be prevented. There was a comparison of both strategies with regard to the necessary number of tracks and duration of welding time.
关键词： condition monitoring,embedded electronics,additive manufacturing,laser-metal-deposition,selektive-laser-melting,process chain
更新于2025-09-12 10:27:22