- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Digital scanned laser lighta??sheet fluorescence lifetime microscopy with widea??field timea??gated imaging
摘要： We develop a multidimensional fluorescence imaging technique by implementing a wide-field time-gated fluorescence lifetime imaging into digital scanned laser light-sheet microscopy (FLIM-DSLM) to measure 3D fluorescence lifetime distribution in mesoscopic specimens with high resolution. This is achieved by acquiring a series of time-gated images at different relative time delays with respect of excitation pulses at different depths. The lifetime is determined for each voxel by iteratively fitting to single exponential decay. The performance of the developed system is evaluated with the measurements of a lifetime reference Rhodamine 6G solution and a sub-resolution fluorescent bead phantom. We also demonstrate the application performances of this system to ex vivo and in vivo imaging of Tg(kdrl:EGFP) transgenic zebrafish embryos, illustrating the lifetime differences between the GFP signal and the autofluorescence signal. The results show that FLIM-DSLM can be used for sample size up to a few millimeters and can be utilized as a powerful and robust method for biomedical research, for example as a readout of protein-protein interactions via F?rster resonance energy transfer.
关键词： Fluorescence lifetime imaging,light-sheet fluorescence microscopy,time-resolved fluorescence imaging
更新于2025-09-23 15:19:57
-
MEH-PPV photophysics: insights from the influence of a nearby 2D quencher
摘要： The effect of 2D quenching on single chain photophysics was investigated by spin coating 13 nm thick films of polystyrene lightly doped with MEH-PPV onto CVD grown graphene and observing the changes in several photoluminescent (PL) observables. With 99% of the PL quenched, we found a 60% drop in the PL lifetime, along with a significant blue-shift of the PL emission due to the preferential quenching of emission at longer wavelengths. During photo-bleaching, the blue spectral shift observed for isolated polymers was eliminated in the presence of the quencher up until 70% of the polymer was photo-bleached. Results were interpreted using a static disorder induced conjugation length distribution model. The quencher, by opening up a new non-radiative decay channel, ensures that excitons do not have sufficient time to migrate to nearby lower energy chromophores. The reduction of energy transfer into the lowest-energy chromophores thus reduces their rate of photo-bleaching. Finally, the difference between the quenched and non-quenched spectra allows the rate of energy transfer along the polymer backbone to be estimated at ～2 ns?1.
关键词： fluorescence lifetime,photo-bleaching,photophysics,conjugated polymers,fluorescence quenching,single molecules,graphene
更新于2025-09-23 15:19:57
-
Benefits of Considering More than Temperature Acceleration for GaN HEMT Life Testing
摘要： The purpose of this work was to investigate the validity of Arrhenius accelerated-life testing when applied to gallium nitride (GaN) high electron mobility transistors (HEMT) lifetime assessments, where the standard assumption is that only critical stressor is temperature, which is derived from operating power, device channel-case, thermal resistance, and baseplate temperature. We found that power or temperature alone could not explain difference in observed degradation, and that accelerated life tests employed by industry can bene?t by considering the impact of accelerating factors besides temperature. Speci?cally, we found that the voltage used to reach a desired power dissipation is important, and also that temperature acceleration alone or voltage alone (without much power dissipation) is insuf?cient to assess lifetime at operating conditions.
关键词： lifetime testing,device degradation,HEMT,gallium nitride,reliability
更新于2025-09-23 15:19:57
-
Controlling the fluorescence properties of nitrogen vacancy centers in nanodiamonds
摘要： Controlling the fluorescence properties of nitrogen vacancy centers in nanodiamonds is an important factor for their use in medical and sensor applications. However, reports providing a deep understanding of the potential factors influencing these properties are rare and focus only on a few influencing factors. The current contribution targets this issue and we report a comprehensive study of the fluorescence properties of NVs in nanodiamonds as a function of electron irradiation fluence and surface termination. Here we show that process parameters such as defect center interactions, in particular, different nitrogen defects and radiation induced lattice defects, as well as surface functionalities have a strong influence on the fluorescence intensity, fluorescence lifetime and the charge state ratio of the NV centers. By employing a time-correlated single photon counting approach we also established a method for fast macroscopic monitoring of the fluorescence properties of ND samples. We found that the fluorescence properties of NV centers may be controlled or even tuned depending upon the radiation treatment, annealing, and surface termination.
关键词： fluorescence lifetime,charge state ratio,nanodiamonds,surface termination,nitrogen vacancy centers,fluorescence properties,electron irradiation
更新于2025-09-19 17:15:36
-
Minority Carrier Lifetime Measurements for Contactless Oxidation Process Characterization and Furnace Profiling
摘要： Contactless minority carrier lifetime (lifetime) measurements by means of microwave detected photoconductivity are employed for oxidation process characterization and furnace profiling. Characterization is performed on oxidized float zone substrates with high resistivity and outstanding bulk quality, suggesting that the measured effective lifetime is strongly dominated by interface recombination and therefore reflects the oxide quality. The applied approach requires neither test structures nor time consuming measurements and is therefore of particular interest if high throughput is required. The method is used to investigate the impact of oxidation furnace leakage as well as to analyze the oxidation homogeneity across a horizontal oxidation furnace. For comparison, capacitance-voltage measurements are conducted to characterize the oxide properties. It is found that any type of furnace leakage, which induces fixed oxide charges as well as interface states, has a heavy impact on the measured effective lifetime, especially on the shape of generation rate dependent lifetime curves. Furthermore, a distinct lifetime decrease towards the tube door of the oxidation furnace could be observed. The latter is even detectable in an ideal oxidation process, generating high quality oxides. Besides plain equipment characterization, the presented approach is suitable to optimize the oxidation process itself regarding different parameters like temperature, gas flow, pressure, or process time.
关键词： oxide characterization,float zone,lifetime,high-resistivity,furnace profiling
更新于2025-09-19 17:15:36
-
Lifetime super-resolution optical fluctuation imaging
摘要： In this paper, we propose a promising super-resolution imaging scheme in fluorescence lifetime domain (lifetime super-resolution optical fluctuation imaging, ltSOFI). ltSOFI has the potential to obtain super-resolution images by taking advantage of fluorescence lifetime blinking under wide-field lifetime detection. The proof-of-concept for ltSOFI was demonstrated through numerical simulation of high-order cumulant analysis on fluorescence lifetime blinking emitters. As a tentative experimental demonstration, we obtained super-resolution lifetime imaging from time-lapse FLIM recording of HeLa cells expressing a cAMP sensor using ltSOFI method. ltSOFI is expected to initiate a new dimension in the lifetime domain for blinking-based super-resolution microscopy.
关键词： fluorescence fluctuation,lifetime blinking,super-resolution
更新于2025-09-19 17:15:36
-
Synthesis and Luminescence Properties of Core-Shell-Shell Composites: SiO2@PMDA-Si-Tb@SiO2 and SiO2@PMDA-Si-Tb-phen@SiO2
摘要： Two novel core-shell composites SiO2@PMDA-Si-Tb, SiO2@PMDA-Si-Tb-phen with SiO2 as the core and terbium organic complex as the shell, were successfully synthesized. The terbium ion was coordinated with organic ligand forming terbium organic complex in the shell layer. The bi-functional organosilane ((HOOC)2C6H2(CONH(CH2)3Si(OCH2CH3)3)2 (abbreviated as PMDA-Si) was used as the first ligand and phen as the second ligand. Furthermore, the silica-modified SiO2@PMDA-Si-Tb@SiO2 and SiO2@PMDA-Si-Tb-phen@SiO2 core-shell-shell composites were also synthesized by sol-gel chemical route. An amorphous silica shell was coated around the SiO2@PMDA-Si-Tb and SiO2@PMDA-Si-Tb-phen core-shell composites. The core-shell and core-shell-shell composites both exhibited excellent luminescence in solid state. The luminescence of core-shell-shell composites was stronger than that of core-shell composites. Meanwhile, an improved luminescence stability property for the core-shell-shell composites was found in the aqueous solution. The core-shell-shell composites exhibited bright luminescence, high stability, long lifetime, and good solubility, which may present potential applications in the bio-medical field.
关键词： silica shell,2,5-bis((3-(triethoxysilyl)propyl)carbamoyl)terephthalic acid (PMDA-Si),lifetime,photoluminescence,core-shell composite,core-shell-shell composite
更新于2025-09-19 17:15:36
-
Widening the 2D/3D Perovskite Family for Efficient and Thermal-Resistant Solar Cells by the Use of Secondary Ammonium Cations
摘要： While 2D/3D layered perovskites have been the object of comprehensive research principally focused on increasing the long-term stability observed in 3D perovskites, significant opportunities still exist concerning the application of different kinds of cations outside the sphere of primary amines, which are the cations most usually applied. Our results demonstrate that the materials and the solar cells prepared with dipropylammonium iodide (DipI), a bulky secondary ammonium cation of small size, lead to obtaining materials that are not only efficient and thermodynamically stable but also robust toward heat stress. Time-resolved studies indicate longer carrier lifetime for 2D/3D layered perovskites fabricated with this bulky cation than for systems based on bulky primary ammonium cations, which allowed us to obtain PCE = 12.51% (n = 10), 15.78% (n = 50), and 17.90% (n = 90). We determine that the concentration of perovskite material after 240 min at 100 °C is up to 575% greater in the 2D/3D perovskite (n = 10) than that observed in 3D perovskite films. The material stability also improves the thermal stability of the photovoltaic devices, presenting an efficiency drop of just 4% for n = 50 and n = 10 after thermal annealing while the performance drop for reference 3D samples in the same conditions was greater than 80%.
关键词： carrier lifetime,2D/3D perovskites,solar cells,thermal stability,secondary ammonium cations
更新于2025-09-19 17:13:59
-
Magneto-electroluminescence response in 2D and 3D hybrid organica??inorganic perovskite light emitting diodes
摘要： We have studied the magneto-electroluminescence (MEL) response in light emitting diodes based on 2D-(PEA)2PbI4 and 3D-MAPbI3 hybrid organic–inorganic perovskites at cryogenic temperatures. We found that the MEL is negative, i.e., the EL decreases with the applied field strength, B. In addition, the MEL(B) response has a Lorentzian line shape whose width depends on the perovskite used. We interpret the MEL(B) response using the “Δg mechanism” in which the spin of the injected electron–hole (e–h) pairs oscillates between singlet and triplet configurations due to different precession frequencies of the electron and hole constituents that originate from the difference, Δg, in the electron and hole gyromagnetic constants, g. In this model, the MEL(B) linewidth is inversely proportional to the spin lifetime and Δg. The model used is validated by directly measuring the spin lifetime of photogenerated e–h pairs using the circularly polarized pump–probe transmission technique with 100 fs resolution.
关键词： hybrid organic–inorganic perovskites,spin lifetime,Δg mechanism,light emitting diodes,magneto-electroluminescence
更新于2025-09-19 17:13:59
-
Ultrashort laser based two-photon phase-resolved fluorescence lifetime measurement method
摘要： This paper presents a two-photon phase-resolved fluorescence-lifetime measurement method based on the use of an ultrashort pulse laser. The proposed method also involves the use of a lock-in amplifier to control the phase difference between the reference and fluorescence signals, thereby facilitating the use of an alternative method for determining fluorescence lifetimes. Verification of the fluorescence lifetimes as measured in this study was performed using rhodamine B and a cellular thermoprobe as samples. In this study, we assume that the fluorescence decay was monoexponential in all cases. Rhodamine B was observed to exhibit an average fluorescence lifetime of 2.15 ns, whereas a temperature sensitivity of 1.39 ns/°C over a temperature range of 33.79–37.2 °C was demonstrated for the cellular thermoprobe. These results validate the feasibility of the proposed method for accurate measurement of fluorescence lifetimes using a simple laser configuration.
关键词： rhodamine B,ultrashort pulse laser,temperature sensor,phase-resolved fluorescence-lifetime,two-photon microscopy,cellular thermoprobe
更新于2025-09-19 17:13:59