- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
A novel electrochemiluminescence sensor based on resonance energy transfer system between nitrogen doped graphene quantum dots and boron nitride quantum dots for sensitive detection of folic acid
摘要： Electrochemiluminescence resonance energy transfer (ECL-RET) between quantum dots (QDs) was firstly proposed. In this work, boron nitride quantum dots (BNQDs) as the donor and nitrogen doped graphene quantum dots (NGQDs) as the acceptor were confirmed by the absorption spectrum, the emission spectrum and fluorescence spectrum. Based on the reaction between FA and the SO4?? in the ECL system of NGQDs/BNQDs/K2S2O8, the ECL sensing platform for FA was successfully constructed. Surprisingly, a stable and strong ECL signal was obtained based on the RET, which was used for signal-off detection of FA in the presence of coreactant K2S2O8. Notably, about 10-fold enhancement was observed compared with the absence of BNQDs. The proposed sensor showed wide linear ranges of 1.0 × 10?11 M to 1.0 × 10?4 M and a low detection limit of 5.13 × 10?12 M. Simultaneously, the sensor was successfully applied to detection of FA in human serum samples with excellent recoveries. Therefore, the NGQDs/BNQDs system provided a new perspective for development of novel ECL-RET sensors.
关键词： Folic acid,Nitrogen doped graphene quantum dots,Resonance energy transfer,Boron nitride quantum dots,Electrochemiluminescence
更新于2025-09-16 10:30:52
-
Preparation and cell imaging of nitrogen-doped graphene quantum dot conjugated indomethacin
摘要： The nitrogen-doped graphene quantum dot conjugated indomethacin (N-GQD-IDM) was synthesized by an amide reaction. The results of FTIR indicated that the synthesis of N-GQD-IDM was successful. It was then co-cultured with MCF-7 cells, and obvious fluorescence was observed under a laser confocal scanning microscope. With the increase of incubation time, the material accumulated significantly in the cells and the fluorescence intensity of the cells was slightly improved. This compound could be suggested as a promising fluorescent probe in cancer cell labeling.
关键词： indomethacin,fluorescent probe,cancer cell labeling,nitrogen-doped graphene quantum dots
更新于2025-09-16 10:30:52
-
Electrochemical transformation of black phosphorous to phosphorene quantum dots: effect of nitrogen doping
摘要： We present a comparative analysis of the structural and optical properties of electrosynthesized PQDs, a new class of size-tunable luminescent materials and their nitrogen doped counter parts(NPQDs). Nitrogen doping onto phopshorene lattice could be realized in situ at room temperature using either nitrogen containing electrolyte and/or supporting electrolyte in the solution. An increased quantum ef?ciency as well as redox behavior has been observed for PQDs upon nitrogen doping and a critical analysis of the effect of nitrogen on the structural, optical and electrochemical properties of PQDs suggests several potential bene?ts of applications ranging from electrocatalysts and molecular electronics to different types of sensors and bioimaging.
关键词： Nitrogen Doping,Phosphorene Quantum Dots,Black Phosphorus,Electrosynthesis
更新于2025-09-16 10:30:52
-
Photoluminescence and Photodetecting Properties of the Hydrothermally Synthesized Nitrogen-Doped Carbon Quantum Dots
摘要： Carbon quantum dots (CQDs) have attracted more and more attention as the representative of a new generation of photoluminescence (PL) and photodetecting materials due to their unique optoelectrical properties. However, the formation mechanism of the CQDs as well as the origin of PL from the CQDs are still open questions to be issued. Here, we report our recent progress on the synthesis of the nitrogen-doped carbon quantum dots (N-CQDs) with a high photoluminescence quantum yield (PLQY) of 97.4% by adjusting the hydrothermal synthesis parameters with the citric acid (CA) and ethylenediamine (EDA) as the precursors. The detailed structure and properties indicate that N-CQDs is synthesized by dehydration, condensation, and carbonization, and the PL is attributed to the synergistic effect of the carbogenic core and the surface/molecule state. With above progress, an all-carbon-based ultra-violet (UV) photodetector is fabricated based on the N-CQDs/graphene hybrid composites, which exhibits significant negative photoconductivity phenomenon. A maximal negative responsivity up to 2.5×104 AW-1 at UV region has been observed, which was attributed to the two competing mechanisms. One is the oxygen adsorption and photo-desorption induced negative photoresponse, while the other is the surface defects in N-CQDs related positive photoconducting. Our work reveals the mechanisms driven force behind positive and the negative photoconducance phenomenon of photodetectors based on CQDs, which not only contributes to the further understanding of the fluorescent and photoresponse mechanisms of CQDs, and promotes the application potential of CQDs in the field of photodetection and nano-optoelectronic sensors.
关键词： Photodetecting,Nitrogen-doped,Hydrothermal synthesis,Photoluminescence,Carbon quantum dots
更新于2025-09-16 10:30:52
-
Austenitic Stainless Steel Powders with Increased Nitrogen Content for Laser Additive Manufacturing
摘要： Nitrogen is used as an alloying element, substituting the expensive and allergenic element nickel, in austenitic stainless steels to improve their mechanical properties and corrosion resistance. The development of austenitic stainless steel powders with increased nitrogen content for laser additive manufacturing has recently received great interest. To increase nitrogen content in the austenitic steel powders (for example AISI 316L), two measures are taken in this study: (1) melting the steel under a nitrogen atmosphere, and (2) adding manganese to increase the solubility of nitrogen in the steel. The steel melt is then atomized by means of gas atomization (with either nitrogen or argon). The resulting powders are examined and characterized with regard to nitrogen content, particle size distribution, particle shape, microstructure, and ?owability. It shows that about 0.2–0.3 mass % nitrogen can be added to the austenitic stainless steel 316L by adding manganese and melting the steel under nitrogen atmosphere. The particles are spherical in shape and very few satellite particles are observed. The steel powders show good ?owability and packing density, therefore they can be successfully processed by means of laser powder bed fusion (L-PBF).
关键词： nitrogen alloying,powder production,austenitic stainless steel,gas atomization,laser additive manufacturing
更新于2025-09-16 10:30:52
-
[IEEE 2018 IEEE 8th International Conference Nanomaterials: Application & Properties (NAP) - Zatoka, Ukraine (2018.9.9-2018.9.14)] 2018 IEEE 8th International Conference Nanomaterials: Application & Properties (NAP) - Efficient Two-Photon Luminescence for Bioimaging Using Polymer Conjugations of Graphene Quantum Dots Based Materials
摘要： In this study, examination results revealed that conjugated polymers containing nitrogen and sulfur atoms lead to a higher quantum confinement of emissive energy trapped on the surface of material (graphene quantum dot (GQD)-polymers), resulting in a high luminescence quantum yield and impressive two-photon properties. Additionally, the GQD-polymers generated nonreactive oxygen species-dependent oxidative stress on cells. Furthermore, we demonstrated the effective use of two-photon excitation-mediated high two-photon luminescence intensity in an acidic environment enabled GQD-polymers to act as a promising contrast probe. When cancer cells are labeled with specific antibody GQD-polymers conjugates, molecular-specific imaging can be performed deep into a tissue phantom with extremely high signal-to-noise ratios. In situations in which imaging depths are limited by the maximum available power that can be delivered to the three-dimensional (3D) bioimaging plane without causing damage to tissue, GQD-polymers might provide sufficient brightness to extend the maximum depth of imaging. Moreover, we demonstrated that the use of GQD-polymers can expand the capabilities of two-photon imaging to allow noninvasive 3D bioimaging of a variety of new molecular signatures.
关键词： photostability,reactive oxygen species,three-dimensional bioimaging,photodynamic therapy,two-photon excitation,contrast probe,graphene,quantum dot-polymer,two-photon luminescence,two-photon,contrast agent,nitrogen-doped graphene quantum dots
更新于2025-09-16 10:30:52
-
Nitrogen plasma treatment of ZnO and TiO2 nanowire arrays for polymer photovoltaic applications
摘要： This work reports on a simple, yet unique approach to improving the opto-electronic properties of vertically-aligned arrays of rutile TiO2 and Wurzite ZnO nanowires by means of controlled nitrogen doping during exposure to highly kinetic radio-frequency generated N2 plasma radicals. Morphologically, the plasma treatment causes a distortion of the vertical alignment of the nanowires due to a dissociation of the weak Van der Waals force clustering the nanowires. Optical spectroscopy show that plasma treatment increases the light transmission of TiO2 arrays from 48% to 90%, with the ZnO arrays exhibiting an increase from 70% to 90% in the visible to UV range. The as-synthesized TiO2 array has an indirect band gap of 3.13 eV, which reduces to 3.03 eV after N2 treatment, with the ZnO equivalent decreasing from 3.20 to 3.17 eV post plasma exposure. A study of the 3d transition metal near edge fine structure of both Ti and Zn show that the N2 plasma treatment of the nanowires results in nitrogen doping of both TiO2 and ZnO lattices; this is confirmed by scanning transmission electron microscopy coupled with energy dispersive spectroscopy x-ray maps collected of single nanowires, which show a clear distribution of nitrogen throughout the metal-oxide. Application of these structures in P3HT:PCBM polymer blends shows progressive improvement in the photoluminescence quenching of the photoactive layer when incorporating both undoped and nitrogen-doped nanowires.
关键词： Electron energy loss spectroscopy,RF plasma nitrogen doping,One-dimensional nanowire arrays,Hydrothermal synthesis
更新于2025-09-16 10:30:52
-
Advanced Electrode Materials Comprising of Structurea??Engineered Quantum Dots for Higha??Performance Asymmetric Microa??Supercapacitors
摘要： Micro-supercapacitors (MSCs) as a new class of energy storage devices have attracted great attention due to their unique merits. However, the narrow operating voltage, slow frequency response, and relatively low energy density of MSCs are still insufficient. Therefore, an effective strategy to improve their electrochemical performance by innovating upon the design from various aspects remains a huge challenge. Here, surface and structural engineering by downsizing to quantum dot scale, doping heteroatoms, creating more structural defects, and introducing rich functional groups to two dimensional (2D) materials is employed to tailor their physicochemical properties. The resulting nitrogen-doped graphene quantum dots (N-GQDs) and molybdenum disulfide quantum dots (MoS2-QDs) show outstanding electrochemical performance as negative and positive electrode materials, respectively. Importantly, the obtained N-GQDs//MoS2-QDs asymmetric MSCs device exhibits a large operating voltage up to 1.5 V (far exceeding that of most reported MSCs), an ultrafast frequency response (with a short time constant of 0.087 ms), a high energy density of 0.55 mWh cm?3, and long-term cycling stability. This work not only provides a novel concept for the design of MSCs with enhanced performance but also may have broad application in other energy storage and conversion devices based on QDs materials.
关键词： supercapacitors,electrode materials,engineering,molybdenum disulfide quantum dots,nitrogen-doped graphene quantum dots
更新于2025-09-16 10:30:52
-
On the origin of the enhancement of defect related visible emission in annealed ZnO micropods
摘要： We report an in-depth analysis of ZnO micropods emission. A strong correlation between defect and interband emissions is observed. ZnO micropods were grown using low-temperature chemical bath deposition (CBD). ZnO micropods exhibited perfectly-crystalline hexagonally-shaped facets with various numbers of branches. Raman studies showed that ZnO micropods contained trapped zinc hydroxide (OH) and imidogen (NH) defects that originate from the precursor solution used in the CBD technique. These defects were evacuated by thermal annealing, leading to the recrystallization in the volume of the micropods and the formation of structural defects at their surface, as attested by scanning electron microscopy and X-ray diffraction. More importantly, the thermal annealing was accompanied by a breakdown of the NH defects, which resulted in a nitrogen doping of the ZnO micropods. The structural changes as well as the nitrogen doping resulted in a drastic change in the photoluminescence (PL) spectrum of the ZnO micropods that exhibited a stronger free exciton UV emission as well as a stronger visible (white) emission. An in-depth low-temperature PL study of both UV and visible emission reveals a strong interplay between the structural-defect bound excitonic UV emission (Y-band) and the deep donor (visible) emission, which suggests a rather complex emission mechanism involving an efficient nonradiative energy transfer between the Y-band states and defect states leading to the enhanced visible emission of ZnO micropods after high temperature annealing.
关键词： nitrogen doping,chemical bath deposition,photoluminescence,ZnO micropods,thermal annealing,defect emission
更新于2025-09-16 10:30:52
-
Tailoring of graphene quantum dots for toxic heavy metals detection
摘要： The sensitivity of graphene quantum dots towards toxic heavy metals (THMs; Cd, Hg, Pb) can be improved through doping with nitrogen at the vacant site defects. Using density functional theory, we investigate the adsorption of THMs on the graphene quantum dots (GQDs) and nitrogen-coordinated defective GQDs (GQD@1N, GQD@2N, GQD@3N and GQD@4N) surfaces. Thermochemistry calculations reveal that the adsorption of Pb atom on the surfaces is more favorable than Cd and Hg adsorption. The decoration of the vacant defects with nitrogen on the GQD surface substantially increases the charge transfer and adsorption energy values of THMs on the GQD surface (GQD@4N > GQD@3N > GQD@1N > GQD@2N > GQD). The charge transfer and adsorption energy of lead on each of these surfaces are greater than those of cadmium and mercury (Pb > Cd > Hg). Quantum theory of atoms in molecules analysis and non-covalent interaction plots further validate this result while also confirming that Pb atom has a partially covalent and electrostatic nature of interaction at the nitrogen-coordinated vacant site defects. The electron density values—a criterion of bond strength—for the THM...N interactions are greater than for the THM…C interactions, confirming the observed adsorption energy trends of the THMs on the surfaces. The lowering of the HOMO–LUMO energy gap of the surfaces follows the order Pb > Cd > Hg and also results in increased electrical conductivity, which are consistent with the calculated adsorption energy trends. Significant changes in the energy gap and electric conductivity of the surfaces upon THMs adsorption make them promising sensors for metal detection. Finally, time-dependent density functional theory calculations showed that changes such as peak shifts, peak quenching and appearance of new peaks are seen in the UV–visible absorption spectra of the surfaces upon adsorption of THMs, wherein the shifts in peaks correspond to the magnitude of adsorption energy of THMs on the surfaces. These results should motivate the experimentalists towards using rational and systematic modulation of surfaces as sensors for heavy metal detection.
关键词： Adsorption energy,Toxic heavy metals,Charge transfer,UV–visible absorption spectra,Nitrogen doping,Density functional theory,HOMO–LUMO energy gap,Graphene quantum dots
更新于2025-09-16 10:30:52