- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Rapid Pulsed Light Sintering of Silver Nanowires on Woven Polyester for personal thermal management with enhanced performance, durability and cost-effectiveness
摘要： Fabric-based personal heating patches have small geometric profiles and can be attached to selected areas of garments for personal thermal management to enable significant energy savings in built environments. Scalable fabrication of such patches with high thermal performance at low applied voltage, high durability and low materials cost is critical to the widespread implementation of these energy savings. This work investigates a scalable Intense Pulsed Light (IPL) sintering process for fabricating silver nanowire on woven polyester heating patches. Just 300 microseconds of IPL sintering results in 30% lesser electrical resistance, 70% higher thermal performance, greater durability (under bending up to 2 mm radius of curvature, washing, humidity and high temperature), with only 50% the added nanowire mass compared to state-of-the-art. Computational modeling combining electromagnetic and thermal simulations is performed to uncover the nanoscale temperature gradients during IPL sintering, and the underlying reason for greater durability of the nanowire-fabric after sintering. This large-area, high speed, and ambient-condition IPL sintering process represents an attractive strategy for scalably fabricating personal heating fabric-patches with greater thermal performance, higher durability and reduced costs.
关键词： Intense Pulsed Light (IPL) sintering,woven polyester,personal thermal management,energy savings,silver nanowires
更新于2025-09-10 09:29:36
-
Reduced Graphene Oxide Membrane induced Robust Structural Colors towards Personal Thermal Management
摘要： Angle-independent structural colors are prepared by membrane separation-assisted assembly (MSAA) method with modified reduced graphene oxide (rGO) as the substrate membrane. We show that the wrinkled and crumpled rGO laminates not only ensure uneven morphology of colloidal film but improve color saturation by decreasing coherent scattering. In addition, we study the influence of stopband position on thermal insulation property of the colloidal film for the first time. High absolute temperature difference of 6.9 oC is achieved comparing with control sample. And films with longer stopband positions indicate better thermal insulation performance because of inherent slow photon effect in photonic structure. This general principle of thermal insulation by colloidal films opens the way to new generation of thermal management materials.
关键词： angle-independent,thermal management,human body cooling,graphene,structural color
更新于2025-09-10 09:29:36
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Numerical Investigation of Shape Effect on Microdroplet Evaporation
摘要： As electronic devices continue to shrink in size and increase in functionality, effective thermal management has become a critical bottleneck that hinders continued advancement. Two-phase cooling technologies are of growing interest for electronics cooling due to their high heat removal capacity and small thermal resistance (< 0.3 K-cm2/W) [1]. One typical example of a two-phase cooling method is droplet evaporation, which can provide a high heat transfer coefficient with low superheat. While droplet evaporation has been studied extensively and used in many practical cooling applications (e.g., spray cooling), the relevant work has been confined to spherical droplets with axisymmetric geometries. A rationally designed evaporation platform that yields asymmetric meniscus droplets can potentially achieve larger meniscus curvatures, which give rise to higher vapor concentration gradients along the contact line region and therefore yield higher evaporation rates. In this study, we develop a numerical model to investigate the evaporation behavior of asymmetrical microdroplets suspended on a porous micropillar structure. The equilibrium profiles and mass transport characteristics of droplets with circular, triangular, and square contact shapes are explored using the Volume of Fluid (VOF) method. The evaporative mass transport at the liquid-vapor interface is modeled using a simplified Schrage model [2]. The results show highly non-uniform mass transport characteristics for asymmetrical microdroplets, where a higher local evaporation rate is observed near the locations where the meniscus has high curvature. This phenomenon is attributed to a higher local vapor concentration gradient that drives faster vapor diffusion at more curved regions, similar to a lightning rod exhibiting a strong electric field along a highly curved surface. By using contact line confinement to artificially tune the droplet into a more curved geometry, we find the total evaporation rate from a triangular-based droplet is enhanced by 13% compared to a spherical droplet with the same perimeter and liquid-vapor interfacial area. Such a finding can guide the design and optimization of geometric features to improve evaporation in high performance electronics cooling systems.
关键词： Schrage model,two-phase cooling,droplet evaporation,thermal management,VOF method,microdroplets
更新于2025-09-09 09:28:46
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Practical Concerns for Adoption of Microjet Cooling
摘要： As power densities in advanced electronics continue to rise, the need for high performance thermal solutions becomes increasingly important. Liquid jet impingement has been applied to cooling high power-density electronics due to its ability to dissipate large heat fluxes while maintaining an acceptable operating temperature in the device. Recently, microjets have been embedded within the device substrate, forming a compact solution that is highly scalable. Many practical questions remain, however, on whether microjet technology is ready for actual implementation. In this work, we address several important questions that impede adoption of the technology. Numerical analysis and experimental data are provided to demonstrate the tradeoff between thermal performance and driving pressure requirements through pumping analysis. Additional mechanical concerns regarding robustness to clogging and resistance to erosion are addressed through a 1000-hour extended lifetime test.
关键词： electronics cooling,microjet cooling,erosion,heat transfer,thermal management,clogging
更新于2025-09-09 09:28:46
-
[ASME ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - San Francisco, California, USA (Monday 27 August 2018)] ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems - Lidded vs. Lidless: A Thermal Study
摘要： In the recent years, lidless (bare) die packaging starts to appear in the high power applications with a large die size, complementing the conventional lidded packaging. Given the vast parameters’ space of the lidded vs. lidless designs, a systematic study is necessary to develop a clear and practical design recommendations. In this work, an analytical study is conducted to assess the sensitivity of the thermal spreading resistance (TSR) and the total junction-to-ambient thermal resistance (Rja) on various parameters for a typical lidded (LD) and lidless (LL) package configuration. Useful findings and design guidance are provided.
关键词： junction-to-ambient thermal resistance,lidded packaging,thermal spreading resistance,lidless packaging,thermal management
更新于2025-09-04 15:30:14
-
Thermal management and characterization of high-power wide-bandgap semiconductor electronic and photonic devices in automotive applications
摘要： GaN-based high-power wide-bandgap semiconductor electronics and photonics have been considered as promising candidates to replace conventional devices for automotive applications due to high energy conversion efficiency, ruggedness, and superior transient performance. However, performance and reliability are detrimentally impacted by significant heat generation in the device active area. Therefore, thermal management plays a critical role in the development of GaN-based high-power electronic and photonic devices. This paper presents a comprehensive review of the thermal management strategies for GaN-based lateral power/RF transistors and light-emitting diodes (LEDs) reported by researchers in both industry and academia. The review is divided into three parts: (1) a survey of thermal metrology techniques, including infrared thermography, Raman thermometry, and thermoreflectance thermal imaging, that have been applied to study GaN electronics and photonics, (2) practical thermal management solutions for GaN power electronics, and (3) packaging techniques and cooling systems for GaN LEDs used in automotive lighting applications.
关键词： semiconductor,Raman thermometry,infrared thermography,high-power,automotive applications,LEDs,thermoreflectance thermal imaging,GaN,thermal management,wide-bandgap
更新于2025-09-04 15:30:14
-
Carbonized Bamboos as Excellent 3D Solar Vapor‐Generation Devices
摘要： Given the global challenges of water scarcity, solar-driven vapor generation has become a renewed topic as an energy-efficient way for clean water production. Here, it is revealed that bamboo, as a natural hierarchical cellular material, can be an excellent 3D solar vapor-generation device by a simple carbonization progress. A floating carbonized bamboo sample evaporates water with an extremely high vapor-generation rate of 3.13 kg m?2 h?1 under 1 sun illumination. The high evaporation rate is achieved by the unique natural structure of bamboos. The inner wall of bamboo recovers the diffuse light energy and the thermal radiation heat loss from the 3D bamboo bottom, and the outer wall captures energy from the warmer environment. The high evaporation rate is also attributed to reduced vaporization enthalpy of water confined in the bamboo mesh. Such bamboo-based high-performance, low-cost, self-cleaning, solid durable, and scalable 3D vapor-generation device has attractive applications in desalination as well as industrial and domestic wastewater abatement.
关键词： solar vapor generation,latent heat,hierarchical nanostructures,thermal management,bamboos
更新于2025-09-04 15:30:14