- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Highly Stretchable, High‐Mobility, Free‐Standing All‐Organic Transistors Modulated by Solid‐State Elastomer Electrolytes
摘要： Highly stretchable, high-mobility, and free-standing coplanar-type all-organic transistors based on deformable solid-state elastomer electrolytes are demonstrated using ionic thermoplastic polyurethane (i-TPU), thereby showing high reliability under mechanical stimuli as well as low-voltage operation. Unlike conventional ionic dielectrics, the i-TPU electrolyte prepared herein has remarkable characteristics, i.e., a large specific capacitance of 5.5 μF cm?2, despite the low weight ratio (20 wt%) of the ionic liquid, high transparency, and even stretchability. These i-TPU-based organic transistors exhibit a mobility as high as 7.9 cm2 V?1 s?1, high bendability (Rc, radius of curvature: 7.2 mm), and good stretchability (60% tensile strain). Moreover, they are suitable for low-voltage operation (VDS = ?1.0 V, VGS = ?2.5 V). In addition, the electrical characteristics such as mobility, on-current, and threshold voltage are maintained even in the concave and convex bending state (bending tensile strain of ≈3.4%), respectively. Finally, free-standing, fully stretchable, and semi-transparent coplanar-type all-organic transistors can be fabricated by introducing a poly(3,4-ethylenedioxythiophene):polystyrene sulfonic acid layer as source/drain and gate electrodes, thus achieving low-voltage operation (VDS = ?1.5 V, VGS = ?2.5 V) and an even higher mobility of up to 17.8 cm2 V?1 s?1. Moreover, these devices withstand stretching up to 80% tensile strain.
关键词： free-standing all-organic transistors,stretchable and conformal electronics,high-mobility,elastomer electrolyte,low-voltage operation
更新于2025-11-14 17:28:48
-
Mobility Evaluation of BTBT Derivatives: Limitation and Impact on Charge Transport
摘要： Amongst contemporary semiconductors many of the best performing materials are based on [1]benzothieno[3,2-b][1]benzothiophene (BTBT). Alkylated derivatives of these small molecules not only provide high hole mobilities but can also be easily processed by thermal vacuum or solution deposition methods. Over the last decade numerous publications have been investigating molecular structures and charge transport properties to elucidate what makes these molecules so special. However, the race towards ever higher mobilities resulted in significantly deviating values, which exacerbates linking molecular structure to electronic properties. Moreover, a recently arisen debate on overestimation of organic field-effect transistor mobilities calls for a revaluation of these numbers. We synthesised and characterised four BTBT derivatives with either one or two alkyl chains (themselves consisting of either eight or ten carbon atoms), and investigated their spectroscopic, structural and electrical properties. By employing two probes, gated 4-point probe and gated van der Pauw measurements, we compare field effect mobility values at room and low temperatures, and discuss their feasibility and viability. We attribute mobility changes to different angles between molecule planes and core-to-core double layer stacking of asymmetric BTBT derivatives and show higher mobilities in the presence of more and longer alkyl chains. A so called “zipper effect” brings BTBT cores in closer proximity promoting stronger intermolecular orbital coupling and hence higher charge transport.
关键词： charge transport,mobility,BTBT,organic electronics,organic transistors
更新于2025-10-23 16:08:52
-
Three-dimensional monolithic integration in flexible printed organic transistors
摘要： Direct printing of thin-film transistors has enormous potential for ubiquitous and lightweight wearable electronic applications. However, advances in printed integrated circuits remain very rare. Here we present a three-dimensional (3D) integration approach to achieve technology scaling in printed transistor density, analogous to Moore’s law driven by lithography, as well as enhancing device performance. To provide a proof of principle for the approach, we demonstrate the scalable 3D integration of dual-gate organic transistors on plastic foil by printing with high yield, uniformity, and year-long stability. In addition, the 3D stacking of three complementary transistors enables us to propose a programmable 3D logic array as a new route to design printed flexible digital circuitry essential for the emerging applications. The 3D monolithic integration strategy demonstrated here is applicable to other emerging printable materials, such as carbon nanotubes, oxide semiconductors and 2D semiconducting materials.
关键词： printed electronics,organic transistors,3D integration,dual-gate transistors,flexible circuits
更新于2025-09-23 15:22:29
-
A simple and robust approach to reducing contact resistance in organic transistors
摘要： Efficient injection of charge carriers from the contacts into the semiconductor layer is crucial for achieving high-performance organic devices. The potential drop necessary to accomplish this process yields a resistance associated with the contacts, namely the contact resistance. A large contact resistance can limit the operation of devices and even lead to inaccuracies in the extraction of the device parameters. Here, we demonstrate a simple and efficient strategy for reducing the contact resistance in organic thin-film transistors by more than an order of magnitude by creating high work function domains at the surface of the injecting electrodes to promote channels of enhanced injection. We find that the method is effective for both organic small molecule and polymer semiconductors, where we achieved a contact resistance as low as 200 Ωcm and device charge carrier mobilities as high as 20 cm2V?1s?1, independent of the applied gate voltage.
关键词： contact resistance,organic transistors,charge injection,high work function domains,organic semiconductors
更新于2025-09-10 09:29:36
-
Accessing MHz Operation at 2 V with Field‐Effect Transistors Based on Printed Polymers on Plastic
摘要： Organic printed electronics are suitable for the development of wearable, lightweight, distributed applications in combination with cost-effective production processes. Nonetheless, some necessary features for several envisioned disruptive mass-produced products are still lacking: among these radio-frequency (RF) communication capability, which requires high operational speed combined with low supply voltage in electronic devices processed on cheap plastic foils. Here, it is demonstrated that high-frequency, low-voltage, polymer field-effect transistors can be fabricated on plastic with the sole use of a combination of scalable printing and digital laser-based techniques. These devices reach an operational frequency in excess of 1 MHz at the challengingly low bias voltage of 2 V, and exceed 14 MHz operation at 7 V. In addition, when integrated into a rectifying circuit, they can provide a DC voltage at an input frequency of 13.56 MHz, opening the way for the implementation of RF devices and tags with cost-effective production processes.
关键词： radio frequency,rectifiers,flexible organic transistors,laser sintering,printed electronics
更新于2025-09-04 15:30:14