- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
Laser transmission welding and surface modification of graphene film for flexible supercapacitor applications
摘要： When a graphene ?lm is coated onto a ?exible polymer substrate, weak adhesion can cause delamination of the ?lm under mechanical bending. Moreover, as each graphene layer restacks, the performance of the ?lm as an electrode for a supercapacitor becomes limited. In this study, facile laser welding and surface modi?cation processes are demonstrated to overcome these limitations. First, a continuous wave laser beam is applied to the interface between the coated graphene and the underlying transparent polycarbonate substrate. This welding process signi?cantly improves their adhesion and enables excellent mechanical bendability. Second, surface modi?cation of graphene is achieved under ambient conditions by irradiating the graphene ?lm surface with a nanosecond pulsed laser. Sandwich-type supercapacitors are fabricated using these surface-modi?ed graphene electrodes with a PVA-H3PO4 electrolyte. The e?ect of the laser ?uence on the performance of the supercapacitor is investigated. At an optimal laser power, an areal capacitance of 4.7 mF/cm2 is achieved.
关键词： Laser transmission welding,Graphene,Flexible device,Supercapacitor,Pulsed laser
更新于2025-11-25 10:30:42
-
The Role of Secondary Electron Emission in the Charging of Thin-Film Phase Plates
摘要： In the past few years, physical phase plates (PP) have become a viable tool to enhance the contrast of weak-phase objects in transmission electron microscopy (TEM). Thin-film PPs, such as the Zernike and Hilbert PP, are based on the mean inner potential of microstructured thin films [1,2]. Typically, a thin amorphous carbon (aC)-film is applied, whose thickness is adjusted to induce a well-defined phase shift between unscattered and scattered electrons. However, the illumination with high-energy electrons initiates an irreversible degeneration of the aC-film, which causes electrostatic charging and affects the phase-shifting properties. Taking even advantage of charging, hole-free PPs were recently developed [3,4]. Electrostatic charging plays a central role in the application of thin-film PPs. However, the mechanisms of charging are not well-understood. This work shows that charging is dominated by secondary electron emission. For this purpose, Hilbert PPs were fabricated from different materials to study their charging behavior under electron beam illumination. Besides aC-films, thin films of the metallic glass alloy Pd77.5Cu6.0Si16.5 (PCS) were used for PP fabrication. The PCS-alloy is characterized by an amorphous structure and a high electrical conductivity, which is three orders of magnitude higher than that of aC [5,6]. Moreover, the PCS-alloy exhibits a strong resistance towards oxidation, which suggests less charging of PCS-films.
关键词： transmission electron microscopy,thin-film,secondary electron emission,charging,phase plates
更新于2025-11-21 11:20:48
-
Influence of RbF post deposition treatment on heterojunction and grain boundaries in high efficient (21.1%) Cu(In,Ga)Se2 solar cells
摘要： Post deposition treatments (PDT) by alkali fluorides applied to chalcopyrite-based absorbers have produced record efficiencies in thin-film solar devices in the past few years and recently the efficiency of 22.6 % was achieved with Cu(In,Ga)Se2 (CIGS) using rubidium fluoride (RbF) PDT. However, the effects of RbF-PDT towards changes in its interfacial and grain boundary (GB) properties are still not fully understood. In this work, cells with efficiency higher than 21% are investigated by combination of atom probe tomography (APT) and transmission electron microscopy (TEM) to show how changes in GB and interface chemistry may facilitate high efficiencies. APT studies, carried out at the interface between CIGS absorber and solution-grown CdS buffer layer, show In enrichment and Cu depletion along with traces of Rb. Our APT studies reveal higher amounts of Rb (1.5 at. %) and lower amounts of Na and K (<0.5 at. %) at GBs as compared with previous studies (on non-PDT samples) thus indicating substitution of Na and K by Rb. However, concentration of all alkali elements inside the grain bulk is below detection limit of APT. The concentration of Rb at the GBs in CIGS is measured depth-dependent using both APT and TEM, which consistently shows the increase in Rb towards the Mo back contact. In addition, a pronounced Cu depletion is observed at the GBs which might enhance hole-barrier properties of the GBs, thus improving charge carrier collection and hence the overall efficiency of the device. Thus, understanding effects of RbF-PDT at the atomic scale provides new insights concerning the further improvement of CIGS absorber and interfaces.
关键词： Cu(In,Ga)Se2,Thin-film solar cell,heterojunction,atom probe tomography,post deposition treatments,transmission electron microscopy
更新于2025-11-21 11:20:48
-
Molten salt synthesis of highly ordered and nanostructured hexagonal boron nitride
摘要： Hexagonal boron nitride (h-BN) is a well-known ceramic that has wide application areas ranging from electronics to metallurgy. However, highly ordered h-BN is conventionally synthesized at high temperatures above 1800 °C. In this work, we investigated the formation of BN from boric acid (H3BO3)-ammonium chloride (NH4Cl) mixture in the sodium chloride (NaCl)-potassium chloride (KCl) eutectic salt. We report the synthesis of highly ordered and nanostructured h-BN at 1000 °C using molten salt synthesis. The effect of starting composition, synthesis temperature, and dwell time on BN formation and its structural ordering were systematically investigated. It is concluded that the molten salt plays important roles in the formation of BN and its structural ordering, which is achieved by i) decomposing the boron (B)-nitrogen (N) bearing reactants that lead to the formation of BN layers, and ii) increasing the mobility of BN layers formed. Furthermore, we propose a possible reaction mechanism that governs the BN formation from the reactant mixture in molten salts and explain the observations based on thermodynamic and kinetic considerations.
关键词： Molten salt synthesis,NaCl-KCl eutectic salt,Boron nitride,Structural ordering,High-resolution transmission electron microscopy
更新于2025-11-21 11:01:37
-
Building Intermixed Donor-Acceptor Architectures for Water-Processable Organic Photovoltaics
摘要： A modified synthesis method for aqueous nanoparticle printing inks, based upon vacuum-assisted solvent removal, is reported. Poly(3-hexylthiophene) : phenyl C61 butyric acid methyl ester nanoparticle inks were prepared via this modified miniemulsion method; leading to both an improvement in photoactive layer morphology and a substantial reduction in the ink fabrication time. A combination of UV-visible spectroscopy, photoluminescence spectroscopy and scanning transmission X-ray microscopy measurements revealed a nanoparticle morphology comprised of highly intermixed donor-acceptor domains. Consistent with these measurements, dynamic mechanical thermal analysis of the nanoparticles showed a glass transition temperature (Tg) of 104 °C, rather than a pure polymer phase or pure fullerene phase Tg. Together the spectroscopy, microscopy and thermomechanical data indicate that rapid solvent removal generates a more blended nanoparticle morphology. As such, this study highlights a new experimental lever for optimising nanostructure in the photoactive layer of nanoparticulate organic photovoltaic devices by enabling highly intermixed donor-acceptor architectures to be built from customised nanoparticulate inks.
关键词： organic photovoltaic,scanning transmission X-ray microscopy,morphology,colloidal inks,exciton dissociation,Nanostructure,eco-friendly processing
更新于2025-11-19 16:46:39
-
Nondestructive nanofabrication on monocrystalline silicon via site-controlled formation and removal of oxide mask
摘要： A nondestructively patterned silicon substrate serves as an ideal support for forming high-quality optical structures or devices. A new approach was proposed for fabricating site-controlled structures without destruction on a monocrystalline silicon surface via local anodic oxidation (LAO) and two-step postetching. The nondestruction was demonstrated by conductivity detection with conductive atomic force microscopy (AFM), and an almost perfect crystal lattice was observed from the fabricated hillock by high-resolution transmission electron microscopy (HRTEM). By programming AFM tip traces for LAO processing, site-controlled nondestructive patterns with di?erent layouts can be produced. This approach provides a new route for realizing nondestructive optical substrates.
关键词： conductive atomic force microscopy,high-resolution transmission electron microscopy,local anodic oxidation,nondestructive nanofabrication,monocrystalline silicon
更新于2025-11-14 17:04:02
-
Detailed surface analysis of V-defects in GaN films on patterned silicon(111) substrates by metal–organic chemical vapour deposition
摘要： The growth mechanism of V-defects in GaN films was investigated. It was observed that the crystal faces of both the sidewall of a V-defect and the sidewall of the GaN film boundary belong to the same plane family of {10￣11}, which suggests that the formation of the V-defect is a direct consequence of spontaneous growth like that of the boundary facet. However, the growth rate of the V-defect sidewall is much faster than that of the boundary facet when the V-defect is filling up, implying that lateral growth of {10￣11} planes is not the direct cause of the change in size of V-defects. Since V-defects originate from dislocations, an idea was proposed to correlate the growth of V-defects with the presence of dislocations. Specifically, the change in size of the V-defect is determined by the growth rate around dislocations and the growth rate around dislocations is determined by the growth conditions.
关键词： transmission electron microscopy,threading dislocations,gallium nitride
更新于2025-11-14 17:04:02
-
Adjustable Optical Transmittance of Superhydrophobic Carbon Soot Coatings by in-situ Single-step Control of their Physicochemical Profile
摘要： Soot aerosol formation in the ambient atmosphere, due to inappropriate and incomplete incineration of various fossil fuels or waste materials, has been considered as one of the major anthropogenic contributions to the global warming. However, despite of their adverse environmental impact, the soot nanoparticles are extremely useful in many practical applications if deposited as coatings, since they impart superhydrophobicity of the hosting solid substrate. Here, we unveil novel experimental results on the optical transmittance of superhydrophobic soot coatings with three different physicochemical profiles, synthesized by controlling the atmospheric air flow rate during the combustion of rapeseed oil. The in-depth morphological, chemical and optical analyses using scanning electron microscopy, X-ray photoelectron spectroscopy and spectrophotometry, show relation among the thickness, chemical bonds, morphology and light transmission coefficient (T %) of the soot. In turn, at equal film thicknesses, the gradual decrease of π bonds in the material leads to enhanced light transmittance in the NIR range, while the soot morphology regulates the width of the spectral region with T ?0 %. Our findings demonstrate interconnection between the combustion conditions and the derivative physicochemical properties of the soot coatings, allowing single-step adjustment of their optical behavior, possibly for future underwater optical applications.
关键词： soot,light transmission,physicochemical properties,superhydrophobicity
更新于2025-11-14 15:25:21
-
Evaluation of solar factor using spectral analysis for CdTe photovoltaic glazing
摘要： Solar and luminous light transmission control using Cadmium Telluride (CdTe) based PV glazing systems (15cm × 15 cm × 0.6 cm) were evaluated in this work. Indoor spectral characterisation showed that average solar transmission for investigated three different CdTe glazing systems were 5.77% (CdTe1), 9.54% (CdTe2) and 12.34% (CdTe3). Spectral behaviour of reflections in the range of solar and visible wavelengths was similar for these three different transparent CdTe glazing. Near infrared (NIR) reflection was higher compared to luminous reflection after 1500 nm for all three glazing systems. Solar factor (SF) for CdTe1, CdTe2 and CdTe3 glazing were 0.23, 0.28, 0.26. CdTe3 is the best candidate for glazing application as it has 113% higher luminous transmission while SF only increases by 21% compared to CdTe1.
关键词： transmission,reflection,solar factor,glazing,Cadmium Telluride (CdTe),thin film solar cell
更新于2025-10-22 19:40:53
-
Investigation of semi- transparent dye-sensitized solar cells for fenestration integration
摘要： For any particular location glazing transmission varies with season and time of day. Thus, glazing transmission angular behaviour is more crucial than single glazing transmittance value for building energy simulation and design. In this work, the spectral behaviour of the dye-sensitized solar cell (DSSC) glazing with three different transparencies are studied. Transmittance of the devices are measured after 2 years to understand the effects of device stability on DSSC glazing applications. The solar factor for the devices is calculated for different light incident angles for a whole year at a particular location. The correlation between clearness index and DSSC transmittance is also studied. Finally, glare analysis is performed for all the devices on a sunny day, intermittent day and overcast day, and is also compared with double glazing. It is found that the 37% transparent DSSC glazing leads to a greater reduction in disturbing glare by 21% compared to double glazing on a clear sunny day. All the above results suggest that DSSC glazings could be productively used for fenestration integration in buildings.
关键词： DSSC,clearness index,daylight glare,glazing,solar factor,angular transmission
更新于2025-10-22 19:40:53