修车大队一品楼qm论坛51一品茶楼论坛,栖凤楼品茶全国楼凤app软件 ,栖凤阁全国论坛入口,广州百花丛bhc论坛杭州百花坊妃子阁

Fractional CO2 laser ablation of porcine burn scars after grafting: Is deeper better?

DOI:10.1016/j.burns.2019.10.009 期刊:Burns 出版年份:2019 更新时间:2025-09-11 14:15:04
摘要: Introduction: Fractional CO2 lasers have been used in clinical settings to improve scarring following burn injury. Though used with increasing frequency, the appropriate laser settings are not well defined and overall efficacy of this therapy has not been definitively established. As it has been proposed that for thick hypertrophic scars proportionally greater fluence and thus deeper ablation into the scar tissue would be most effective, the goal of this study was to examine the role of ablation depth on scar outcomes in a highly-controlled porcine model for burn scars-after grafting. Methods: Properties of laser ablated wells were quantified on ex vivo pig skin as a function of laser energy (20, 70 or 150mJ). Full-thickness burn wounds were created on the dorsum of red Duroc pigs with the eschar excised and grafted with a split-thickness autograft meshed and expanded 1.5:1. After four weeks of healing, sites were treated with either 20, 70, or 150 mJ pulse energy from a fractional CO2 laser at 5% density or left untreated as a control. Sites were treated every four weeks with three total sessions. Scar area, pigmentation, erythema, roughness, histology, and biomechanics were evaluated prior to each laser treatment at day 28, 56, and 83, as well as four weeks after the final laser treatment, day 112. Additional biopsies were collected at day 112 for gene expression analysis. Results: The depth of the laser ablated wells increased with increasing pulse energy while the width of the wells was smaller in the 20mJ group and not significantly different in the 70 and 150mJ groups. Scar properties (area, color, biomechanics) were not significantly altered by laser therapy at any of the laser energies tested versus controls. Average scar roughness was improved by laser therapy in a dose dependent manner with scars treated with 150mJ of energy having the smoothest surface; however, these changes were not statistically significant. Assessment of matrix metalloproteinase 9 gene expression showed a slight upregulation in scars treated with 70 or 150 mJ versus control scars and scars treated with 20mJ pulse energy. Conclusion: The current study demonstrated that the properties of the ablative well (depth and width) are not linearly correlated with laser pulse energy, with only a small increase in well depth at energies between 70 and 150 mJ. Overall, the study suggests that there is little difference in outcomes as a function of laser energy. Fractional CO2 laser therapy did not result in any statistically significant benefit to scar properties assessed by quantitative, objective measures, thus highlighting the need for additional clinical investigation of laser therapy efficacy with non-treated controls and objective measures of outcome.
作者: Molly E. Baumann,Britani N. Blackstone,Megan M. Malara,Isabelle A. Clairmonte,Dorothy M. Supp,J. Kevin Bailey,Heather M. Powell
AI智能分析
纠错
研究概述 实验方案 设备清单

To examine the role of ablation depth on scar outcomes in a highly-controlled porcine model for burn scars after grafting.

The study found that fractional CO2 laser therapy did not significantly improve scar properties in a porcine model, suggesting the need for further clinical investigation with non-treated controls and objective outcome measures.

The study was limited by the non-linear correlation between laser pulse energy and ablation well properties, and the lack of statistically significant benefits to scar properties from laser therapy. The porcine model, while similar to human skin, may not fully replicate human scar responses.

SCI高频之选
查看全部>
  • AQ6370D
    AQ6370D
    463

    型号:AQ6370D

    厂家:Yokogawa

    智能分析: Yokogawa AQ6370D是一款性能卓越的光谱分析仪,适用于光通信领域以及光放大器(EDFA)的测量和评估。其高波长分辨率、精准度和宽动态范围使其成为实验室和工业环境中的理想选择。虽然设备体积较大且预热时间较长,但其丰富的接口和出色的显示屏设计弥补了这些不足,整体是一款值得推荐的光谱分析仪。
    获取实验方案
  • ZEISS EVO Family

    型号:ZEISS EVO Family

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS EVO系列是一款高性能??榛璧缱酉晕⒕担视糜诓牧峡蒲?、生命科学及工业质量控制等领域。其先进的技术特性包括高分辨率、广泛加速电压范围和集成EDS系统。该产品操作直观,支持多用户环境,适合科学研究和工业应用。然而,价格信息缺失以及潜在的维护成本可能是其需要注意的方面。总体而言,ZEISS EVO系列表现优秀,值得推荐给专业用户。
    获取实验方案
  • Crossbeam Family

    型号:Crossbeam Family350/550

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS Crossbeam系列是蔡司公司推出的一款高端光电分析设备,结合了场发射扫描电子显微镜(FE-SEM)和聚焦离子束(FIB)的功能,适用于材料科学、纳米技术和半导体行业等多个领域。其高分辨率成像能力和自动化样品制备功能使其成为高通量分析的理想选择。此外,该设备支持多种检测器,具备强大的多功能性,是高精度研究和工业应用的利器。然而,由于其高端定位,设备成本较高且操作需要专业技能。总体而言,该设备表现卓越,为科学研究和工业应用提供了先进的解决方案。
    获取实验方案
  • Axio Observer

    型号:Axio Observer

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: Axio Observer是一款专为金相学研究设计的倒置显微镜系统,以其高效的设计和蔡司知名的光学技术为特色。它能够快速、灵活地分析大量样品,并支持自动化操作,适用于多种应用场景,包括晶粒尺寸分析、非金属夹杂物检测等。然而,其重量较大且光源寿命较短,可能对使用者提出了额外的维护和空间管理需求。总体而言,这款产品在性能和可靠性方面表现出色,特别适合专业实验室使用。
    获取实验方案
  • ZEISS LSM 990 Spectral Multiplex

    型号:ZEISS LSM 990 Spectral Multiplex

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS LSM 990 Spectral Multiplex是一款定位于高端科研机构的光谱成像系统,具有卓越的光谱分辨率和自动化功能,适用于复杂的生物、医学及材料科学实验。其高效的荧光标签分离能力和多功能自动化设计为用户提供了强大的实验支持。然而,高昂的价格和一定的学习曲线可能对中小型实验室构成挑战。总体而言,这是一款性能优越、适应性强的高端实验设备。
    获取实验方案
  • ZEISS Sigma 300 with RISE

    型号:ZEISS Sigma 300 with RISE

    厂家:Carl Zeiss Microscopy GmbH

    智能分析: ZEISS Sigma 300 with RISE是蔡司公司推出的一款高端光谱分析仪,集成了拉曼成像和扫描电子显微镜技术,能够提供高质量的化学和结构分析。其功能强大,支持多领域应用,但设备价格较高且操作学习曲线可能较陡。适用于科研机构和高端实验室,是材料科学和生命科学领域的理想选择。
    获取实验方案
立即咨询

加载中....

论文纠错

您正在对论文“Fractional CO2 laser ablation of porcine burn scars after grafting: Is deeper better?”进行纠错

纠错内容

联系方式(选填)

设备询价

称呼

电话

+86

单位名称

用途

期望交货周期

产品预约

称呼

电话

+86

单位名称

用途

期望交货周期