研究目的
To review recent progresses on the use of frequency-division multiplexing to achieve highly bandwidth-efficient mobile fronthaul with low latency and to present digital signal processing (DSP) techniques for channel aggregation and deaggregation, frequency-domain windowing, adjacent channel leakage ratio reduction, and synchronous transmission of both the I/Q waveforms of wireless signals and the control words (CWs) used for control and management purposes.
研究成果
The DSP-based FDM RoF technique for bandwidth-efficient mobile fronthaul with low latency has been successfully demonstrated. The technique supports the synchronous transmission of both the I/Q waveforms of wireless signals and the control words (CWs) and may find promising applications in future integrated fiber/wireless access networks to provide ultrabroadband access services.
研究不足
The experiments are limited to a 5-km standard single-mode fiber (SSMF) transmission. The bandwidth limitation of the DAC and ADC used causes a drop in signal spectral power density from the low-frequency edge to the high-frequency edge.
1:Experimental Design and Method Selection:
The methodology involves the use of digital signal processing (DSP) techniques for channel aggregation and deaggregation, frequency-domain windowing, and synchronous transmission of both the I/Q waveforms of wireless signals and the control words (CWs).
2:Sample Selection and Data Sources:
The experiments involve the transmission of 48 20-MHz LTE signals and 32 20-MHz LTE signals together with CPRI-compliant CWs.
3:List of Experimental Equipment and Materials:
The setup includes a 1550-nm directly-modulated laser (DML), avalanche photodiode (APD), arbitrary waveform generator, digital-to-analog converter (DAC), and real-time sampling scope.
4:Experimental Procedures and Operational Workflow:
The time-domain waveform of the aggregated signals is stored in an arbitrary waveform generator and outputted by a DAC. This analog signal is then amplified before driving a DML. The generated optical signal is launched into a 5-km standard single-mode fiber (SSMF). After fiber transmission, a variable optical attenuator (VOA) is used to vary the optical power received by an APD. The detected signal is digitized by an ADC in a real-time sampling scope.
5:Data Analysis Methods:
The digitized samples are processed by offline DSP for down-sampling, channel de-aggregation, OFDM demodulation, and evaluation of EVM and BER.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容