摘要： This paper proposes a dimmable light-emitting diode (LED) driver featuring a high power factor and zero-voltage switching on (ZVS). The circuit is obtained by integrating a boost converter and a dc-dc converter with half-bridge topology. The high power factor is achieved by operating the boost converter in discontinuous current mode (DCM). The LEDs are dimmed by the control scheme of asymmetrical pulse-width modulation (ASPWM). The developed circuit eliminates the inherited dc-o?set current of the transformer in a conventional asymmetrical half-bridge converter by introducing a balance capacitor. Both active switches can operate at ZVS by freewheeling the boost inductor current and the transformer magnetizing current to discharge the energy stored in their parasitic capacitance. The circuit operation is analyzed in detailed, and mathematical equations are derived. Finally, a 115-W prototype circuit for driving high brightness LEDs was built and tested. The experimental results verify the feasibility of the proposed LED driver with satisfactory performance. It can achieve a high power factor and ZVS operation.