摘要： Due to its superior properties, erbium sesquioxide, Er2O3, is considered as an important material for applications in various fields such as corrosion-resistant coating, electrical insulating coating, in sensing membranes, semiconductor devices, as catalyst, and for applications in nuclear engineering. In the open literature there is a lack of information about the preparation of Er2O3 nanoparticles using the homogenous precipitation and subsequent calcination route. In this paper a facile method for the synthesis of Er2O3 nanoparticles is suggested. The fabrication was carried out by using the homogeneous precipitation of an erbium ions using sodium hydroxide followed by the calcination process. The influence of: (i) the pH value (9-12) during precipitation process, and (ii) the calcination temperature 300-700 °C on the structural and textural properties of the solids obtained will be addressed. The thermal events accompanying the heat treatment of the dried parent was monitored using thermogravimetric analysis (TGA). Various physicochemical techniques were used for investigating the structure and morphology of Er2O3 nanoparticles. These include X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, filed emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). Moreover, the electrical conductivity of the calcined samples with temperature was measured.