研究目的
To demonstrate a narrowband photo-thermoelectric (PTE) device for wavelength-specific detection of light, integrating a photonic crystal (PC) filter with metal cladding and a thin-film thermocouple for applications in sensors, optical spectroscopy, and imaging.
研究成果
The PC-PTE device demonstrates narrowband optical detection with high sensitivity and specificity, offering potential for applications in sensors and spectroscopy. Future improvements could focus on reducing thermal mass and using materials with higher Seebeck coefficients.
研究不足
The device's response time is limited by the thermal mass of the substrate, and the Seebeck coefficients of the materials used may not be optimal for maximizing thermoelectric output.
1:Experimental Design and Method Selection
The study employs a combination of numerical modeling (FDTD simulation) and experimental fabrication (nanoreplica molding and thin-film deposition) to design and characterize a narrowband PTE device.
2:Sample Selection and Data Sources
The device is fabricated on a 200 μm thick plastic substrate with a surface area of 1 cm2, using materials such as Au and Bi for the thermocouple.
3:List of Experimental Equipment and Materials
Includes a silicon stamp for nanoreplica molding, TiO2 layer deposited via electron beam evaporator, Au and Bi conductors for the thermocouple, and various optical measurement setups.
4:Experimental Procedures and Operational Workflow
Fabrication involves nanoreplica molding to create the grating pattern, followed by deposition of TiO2, Au, and Bi layers. Optical and thermoelectric characterizations are performed using specialized setups.
5:Data Analysis Methods
Optical properties are analyzed using FDTD simulations, and thermoelectric outputs are measured and analyzed to determine device performance metrics like responsivity and noise equivalent power.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
FDTD simulation software
FDTD Solutions
Lumerical Inc.
Performs finite-difference time-domain simulations to model the optical phenomena of the metal-cladding PTE device.
-
finite element-based simulation software
COMSOL Multiphysics 5.3
COMSOL
Calculates the temperature distribution profile through the PTE device.
-
laser cutter
ULTRA 9
Universal Laser Systems
Patterns the acrylic shadow masks used in the deposition of Au and Bi conductors.
-
silicon stamp
Used as a mold in the nanoreplica molding process to transfer the grating pattern onto the plastic substrate.
-
electron beam evaporator
BJD-1800
Temescal
Deposits the TiO2 layer on top of the polymer grating.
-
optical profilometer
F20
Filmetrics Inc.
Measures the thickness and refractive index of the TiO2 layer.
-
silver conductive epoxy
CW2400
CircuitWorks
Attaches metal wires to the Au and Bi contacts.
-
登录查看剩余5件设备及参数对照表
查看全部