研究目的
To develop a more eco-friendly chemical pathway for the production of high purity TiO2 from titanium slag, aiming to reduce environmental impact by eliminating red gypsum waste and enabling acid recycling.
研究成果
The new MILD method successfully produces high purity TiO2 from titanium slag with reduced environmental impact by enabling acid recycling and eliminating red gypsum waste. Optimal parameters include an Al-to-TiO2 molar ratio of 0.45, reduction at 800-900°C for 4h with NaCl-KCl salt, digestion with 6 mol/L HCl at 90°C for 200 minutes, and controlled hydrolysis. The process is energy-efficient when using recycled Al and shows potential for sustainability, though industrial implementation and further impurity management are needed.
研究不足
The study focuses on laboratory-scale experiments; scalability to industrial levels is not addressed. The use of Al reductant, especially primary Al, increases energy consumption and CO2 emissions, though recycled Al mitigates this. Impurities like silica may contaminate the product, requiring additional purification steps. Kinetic hurdles in reduction due to poor wetting by molten Al are partially overcome with salt, but not fully optimized.
1:Experimental Design and Method Selection:
The study involves a three-step process: aluminothermic reduction of titania slag to form titanium sub-oxides, digestion with mild acid (HCl or H2SO4 with H+ concentration ≤6 mol/L), and controlled hydrolysis to precipitate hydrous TiO
2:Thermodynamic and kinetic considerations are addressed using HSC software and experimental optimizations. Sample Selection and Data Sources:
Upgraded titanium slag (UGS) with high TiO2 content is used as the raw material. Samples are prepared by varying Al-to-TiO2 molar ratios, temperatures, times, and the use of NaCl-KCl eutectic salt.
3:List of Experimental Equipment and Materials:
Equipment includes furnaces for reduction at 700-900°C, sealed leaching containers with reflux units for acid digestion, and hydrolysis setups. Materials include Al powder, NaCl-KCl salt, HCl acid, H2O2 oxidant, and argon gas.
4:Experimental Procedures and Operational Workflow:
Reduction is conducted in Ar atmosphere with or without salt, followed by water washing. Digestion is performed with 6 mol/L HCl at 70-90°C for specified times. Oxidation with H2O2 converts Ti3+ to Ti4+, and hydrolysis is carried out at 95-100°C.
5:Data Analysis Methods:
X-ray diffraction (XRD) for phase identification, inductively coupled plasma (ICP) for solution composition analysis, and leaching rates are calculated based on titanium extraction efficiency.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容