- 标题
- 摘要
- 关键词
- 实验方案
- 产品
-
[IEEE 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) - Hangzhou, China (2018.8.13-2018.8.17)] 2018 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO) - Bottom up Nano-integration Technique for the Fabrication of Novel Superconducting Quantum Interference Devices Based on Granular Superconducting Diamond
摘要： The report is focused on the fabrication and characterization of nano-necklaces created from individual nanostructures namely heavily boron-doped superconducting nano-diamond grains and BIISCO whiskers. The production of nanostructures from individual nano-diamonds is done using 3D mechanical nano-manipulation and nano-assembling based on new generation shape memory alloy composite nanotweezers. Quantum transport of such nano-necklaces will be probed in order to study the confinement effects on superconductivity and other related quantum effects. This bottom-up nano-integration technique thus demonstrates a niche fabrication route for the realization of novel complex nanostructured quantum rings which may be of use for quantum information technologies.
关键词： nanodiamonds,bottom-up paradigm,carbon based nanomaterials,nanogripper,shape memory effect,nano-manipulation,superconductivity
更新于2025-09-23 15:23:52
-
Integrated adsorption and photocatalytic degradation of volatile organic compounds (VOCs) using carbon-based nanocomposites: A critical review
摘要： Volatile organic compounds (VOCs) are harmful for human and surrounding ecosystem, and a great number of VOC abatement technologies have been developed during the past few decades. However, the single method has some problems such as high energy consumption, unfriendly environment, and low removal efficiency. Recently, the integration of adsorption and photocatalytic degradation of VOCs is considered as a promising one. Carbon material, with large surface area, high adsorption capacity, and fast electron transfer ability, is widely used in integrated adsorptive-photocatalytic removal of VOCs. It is thus crucial to digest and summarize recent research advances in carbon-based nanocomposites as the adsorbent-photocatalyst for VOC removal. To satisfy this need, this work provides a critical review of the related literature with focuses on: (1) the advantages and disadvantages of various carbon-based nanocomposites for the applications of VOC adsorption and photocatalytic degradation; (2) models and mechanisms of adsorptive-photocatalytic removal of VOCs according to the material properties; and (3) major factors controlling adsorption-photocatalysis processes of VOCs. The review is aimed to establish the "structure-property-application" relationships for the development of innovative carbon-supported nanocomposites and to promote future research on the integrated adsorptive and photocatalytic removal of VOCs.
关键词： Modeling,Photocatalytic degradation,VOC abatement,Carbon-based nanocomposite,Adsorption
更新于2025-09-23 15:21:21
-
Graphene Oxide - Applications and Opportunities || Graphene Oxide/Reduced Graphene Oxide Aerogels
摘要： In this chapter, we will discuss aerogels based on graphene oxide/reduced graphene oxide—promising composite materials, based on 2D carbon nanoparticles, with a certain architecture that prevents aggregation of graphene layers with a highly developed surface that have a high potential technological realization as materials for supercapacitors, sensors, batteries, and actuators. This chapter describes the existing methods for producing composite aerogels based on graphene oxide/reduced graphene oxide, the structural features of these materials, the most relevant studies in the areas of surface modification, architectural control, improvement of mechanical properties, and the most interesting applications. It has been shown that such materials have relatively high specific surface values and a high degree of exfoliation of graphene layers, but an urgent need is to improve them, which is due to the fragility of graphene aerogels and composite materials based on them, as well as the need to modify the surface to control porosity.
关键词： cross linking,hydrothermal synthesis,highly porous materials,carbon based materials,reduced graphene oxide aerogels,graphene oxide aerogels,self-gelation
更新于2025-09-23 15:21:21
-
Fabrication and performance analysis of a low cost, Pt free counter electrode using carbon coated ZnAl layered double hydroxide (C/ZnAl-LDH) for dye sensitized solar cells
摘要： Carbon based material represents an e?ective substitute for Pt counter electrodes (CEs) in Dye Sensitized Solar Cells (DSSCs). This study introduces a novel carbon coated ZnAl layered double hydroxides (C/ZnAl-LDH) can be utilised as an e?ective CE in DSSCs. C/ZnAl-LDH was synthesised by the pyrolysis of ZnAl-LDH using glucose solution. The synthesised C/ZnAl-LDH was characterised using TEM, SEM, XRD and BET analysis. The surface roughness of both Pt and C/ZnAl-LDH ?lms were analysed using AFM spectroscopy. C/ZnAl-LDH slurry was pasted uniformly using doctor blade technique onto FTO glass substrate. The electrochemical measurements such as Cyclic Voltammetry (CV), Electrochemical Impedance Spectroscopy (EIS) and Tafel polarization recommends that C/ZnAl-LDH can be used as a CE due to its good reduction rate of ?I3 comparable with Pt CEs. The photovoltaic parameters were observed to be 0.66 V and 11.97 mA/cm2 for open circuit voltage V(oc) and short circuit current density J(sc) respectively for C/ZnAl-LDH CE. The assembled cell with C/ZnAl LDH CE having power conversion e?ciency (PCE) of 3.18% is comparable to Pt CE having 4.62% which is measured under the similar testing conditions.
关键词： Dye Sensitized Solar Cell,Carbon based material,Counter electrode,Layered double hydroxides,Electrochemical parameters
更新于2025-09-23 15:21:01
-
Enhancing fully printable mesoscopic perovskite solar cell performance using integrated metallic grids to improve carbon electrode conductivity
摘要： Carbon based Perovskite Solar cells (C-PSCs) have emerged as the most promising candidates for commercialisation in the field of perovskite photovoltaics, as they are highly stable, low cost and make use of easily scaled manufacturing techniques. However, the limited conductivity of the carbon electrode inhibits performance and represents a significant barrier to commercial application. Τhis work presents a scalable method for enhancing the carbon electrode conductivity through the integration of aluminium and copper grids into prefabricated C-PSCs. Adhered to the cells using an additional low temperature carbon ink, the metallic grids were found to dramatically reduce top electrode series resistance, leading to a large improvement in fill factor and efficiency. After grid integration, the 1 cm2 C-PSCs yielded power conversion efficiency (PCE) of 13.4% and 13% for copper and aluminium respectively, while standard C-PSCs obtained PCE of 11.3%. Performance is also significantly augmented in the case of larger-scale 11.7 cm2 modules, where PCEs went from 7.7% to 10% and 11% for aluminium and copper grids respectively. This technique offers a fast and low temperature route to high-performance, large-area C-PSCs and could therefore have serious potential for application to the high-volume manufacture of perovskite cells and modules.
关键词： Module,Carbon based perovskite solar cell,Enhanced efficiency,Low temperature carbon ink,Metallic grid,Highly conductive carbon electrode
更新于2025-09-23 15:19:57
-
Plasmonica??Assisted Graphene Oxide Films with Enhanced Photothermal Actuation for Soft Robots
摘要： Carbon-based materials are widely used as light-driven soft actuators relying on their thermal desorption or expansion. However, applying a passive layer in such film construction greatly limits the actuating efficiency, e.g., bending amplitude and speed. In this work, a dual active layer strengthened bilayer composite film made of graphene oxide (GO)–polydopamine (PDA)–gold nanoparticles (Au NPs)/polydimethylsiloxane (PDMS) is developed. In this film, the conventional passive layer is replaced by another AuNPs-enhanced thermal responsive layer. When applying NIR light exposure, the whole film deforms controllably resulting from the water loss in the GO–PDA–Au NPs layer and thermal expansion in the PDMS layer. Benefiting from the dual active bilayer mechanism, the thin film’s actuating efficiency is dramatically improved compared with that of conventional methods. Specifically, the bending amplitude is enhanced up to 173%, and the actuating speed is improved to 3.5-fold. The soft actuator can act as an artificial arm with high actuating strength and can be used as a wireless gripper. Moreover, the film can be designed as soft robots with various locomotion modes including linear, rolling, and steering motions. The developed composite film offers new opportunities for biomimetic soft robotics as well as future applications.
关键词： plasmonic-enhanced effects,soft manipulators,carbon-based materials,soft robotics,dual active bilayers
更新于2025-09-23 15:19:57
-
[IEEE 2018 International Flexible Electronics Technology Conference (IFETC) - Ottawa, ON, Canada (2018.8.7-2018.8.9)] 2018 International Flexible Electronics Technology Conference (IFETC) - Fabrication and Performance Evaluation of Carbon-based Stretchable RFID Tags on Textile Substrates
摘要： We fabricate carbon-based stretchable antennas for passive UHF RFID tags. The tag antennas are created on a stretchable elastic band by brush-painting. In addition to wireless evaluation of the fabricated RFID tags before and after cyclic stretching, the properties of the novel carbon-based antenna material are studied. The wireless performance of the established RFID tags is compared to similar stretchable silver-based RFID tags. Based on the achieved results, the established carbon-based tag antennas do not perform in the same high level as the silver-based tag antennas but their read ranges of around 2 to 2.4 meters are suitable for versatile textile-integrated RFID applications. Stretching causes permanent decrease to the tag read range but they remain functional even after 100 stretching cycles. These preliminary results are very promising, considering the current trend towards more environmentally friendly and cost-effective materials in electronics.
关键词： passive UHF RFID,textile substrates,wearable electronics,carbon-based materials,antennas,stretchable electronics
更新于2025-09-19 17:15:36
-
Novel antisolvent-washing strategy for highly efficient carbon-based planar CsPbBr3 perovskite solar cells
摘要： All-inorganic CsPbBr3 is attracting tremendous attentions in photovoltaic field due to its superior stability. However, CsPbBr3 perovskite always suffers from a poor crystallinity and film morphology. Many efforts have been paid on the CsBr deposition process to improve the film quality, while few attentions are paid on the crystallization kinetics of the PbBr2 framework film. Here, we demonstrate a novel antisolvent-washing strategy for the PbBr2 film for the first time to fabricate high-quality CsPbBr3 film. This technique has a significant impact on the nucleation and growth of PbBr2 crystals. As-prepared CsPbBr3 films exhibit more homogeneous with higher crystallinity and coverage as well as larger grain sizes compared to those untreated ones. The best-performing antisolvent-treated perovskite solar cell achieves a scanned power conversion efficiency of 8.55%, which is an excellent efficiency for planar CsPbBr3 cells reported yet. This enhancement can be mainly attributed to the more effective charge transport and suppressed non-radiative recombination caused by the reduced defect densities. Moreover, our devices show superb stability when stored in air for 1000 h and upon persistent thermal attack at 80°C. Our work provides a new train of thought for controlling the growth dynamics and film morphology of CsPbBr3 films.
关键词： Antisolvent-washing,CsPbBr3,Planar heterojunction,High efficiency and stability,Carbon-based,Low costs
更新于2025-09-19 17:13:59
-
Sequentially vacuum evaporated high-quality CsPbBr3 films for efficient carbon-based planar heterojunction perovskite solar cells
摘要： All-inorganic CsPbBr3 perovskite has triggered great interests in photovoltaic field owing to its superior stability. However, the uncontrollable CsPbBr3 film growth in solution always leads to a poor film quality with low phase-purity as well as many surface and bulk defects. Herein, we demonstrate an environmentally friendly non-solution route to fabricate high-quality CsPbBr3 films for carbon-based planar perovskite solar cells. By precisely tuning the thickness ratio of the evaporated CsBr to PbBr2 precursors (r), the dominant phase conversion of the cesium lead bromide perovskites from PbBr2-rich CsPb2Br5 (r ? 12:7) to CsPbBr3 (r ? 12:8), and further to CsBr-rich Cs4PbBr6 (r ? 12:9) are achieved. The optimized CsPbBr3 perovskites are highly phase-pure and crystallized with ultra-high light absorption ability. The as-prepared CsPbBr3 films also exhibit a dense and uniform morphology with large grain sizes and monolayer-vertical aligned grains. The corresponding devices deliver a champion PCE of 7.58%, which is an excellent efficiency among carbon-based CsPbBr3 cells with evaporated CsPbBr3 light absorbers. The large-area (1 cm2) devices also achieve an efficiency of 6.21%. Moreover, the unencapsulated CsPbBr3 devices present superior moisture and thermal stabilities. Our work provides a facile approach to fabricate high-quality and large-area CsPbBr3 films for highly efficient solar cells, light-emitting diodes and photodetectors.
关键词： CsPbBr3,Highly efficient and stable,Non-solution,Sequential evaporation,Perovskite solar cells,Carbon-based
更新于2025-09-19 17:13:59
-
Laser-induced graphene and carbon nanotubes as conductive carbon-based materials in environmental technology
摘要： Nanotechnology and nanomaterials have attracted interest due to their potential in mitigating contemporary environmental challenges, such as the stressors imposed by increased industrial and agricultural activities, and the deterioration of air, soil and water quality. In particular, advanced technologies that harness carbon-based nanomaterials are poised to emerge as tools that provide new solutions for the global water crises. These tools include, electrically conductive membrane processes, which uniquely combine a separation process with a functional surface. In this respect, laser-induced graphene (LIG) and carbon nanotubes (CNTs) are electrically conductive carbon nanomaterials that hold great utility in a multitude of environmental applications, including the development of fouling-resistant systems for desalination and water treatment, enhanced separation methods, and innovative pollutant sensing and electrocatalytic platforms. Consequently, this review article describes and compares some important recent advances in LIG- and CNT-based electroactive surfaces. The discussion of LIG as an emerging carbon material set in context with CNTs is intended to shed light on future directions and development possibilities to meet the growing global challenges in terms of water treatment applications of both materials as well as other electrically conductive carbon-based nanomaterials exhibiting exceptional performance and versatility.
关键词： environmental applications,nanomaterials,electrically conductive membrane processes,laser-induced graphene,Nanotechnology,water treatment,carbon nanotubes,carbon-based nanomaterials
更新于2025-09-16 10:30:52