研究目的
Investigating the influence of annealing temperature on the structural, morphological, optical, and magnetic properties of hierarchically one-dimensional mesoporous ZnFe2O4 rods synthesized via the solvothermal approach.
研究成果
The study successfully synthesized hierarchically one-dimensional mesoporous ZnFe2O4 rods via the solvothermal approach and investigated the effects of annealing temperature on their properties. It was found that annealing at higher temperatures increases the crystallite size and saturation magnetization while decreasing the specific surface area and increasing the optical band gap. The results provide valuable insights for the fabrication of porous nanostructures for various applications.
研究不足
The study is limited to the effects of annealing temperature on ZnFe2O4 nanorods synthesized via the solvothermal method. The research could be expanded to explore other synthesis methods or the effects of additional variables such as pressure or different surfactants.
1:Experimental Design and Method Selection:
The solvothermal method was chosen for the synthesis of ZnFe2O4 nanorods, utilizing oxalic acid as a surfactant and ethylene glycol as a solvent. The influence of annealing temperature (400 °C and 600 °C) on the properties of the nanorods was investigated.
2:Sample Selection and Data Sources:
Zinc sulphate heptahydrate and ferric sulphate hydrate were used as initial precursors. The samples were annealed at two different temperatures to study the annealing effect.
3:List of Experimental Equipment and Materials:
Rigaku Ultima-IV powder X-ray diffractometer, Perkin Elmer Frontier FTIR spectrophotometer, FESEM (Nova Nano FE-SEM 450), HRTEM (Tecnai G2 20), Quantachrome AsiQwin for BET surface area measurements, confocal micro-Raman spectrometer (VoyageTM BW5435-532SY), PHI 5000 Versa Prob II for XPS, SHIMDZU UV-2450 UV–Vis spectrophotometer, and Lakshore Model 7400 for magnetic measurements.
4:Experimental Procedures and Operational Workflow:
The synthesis involved dissolving precursors in a mixture of ethylene glycol and distilled water, adding oxalic acid, and sealing the suspension in a Teflon-lined stainless steel autoclave at 120 °C for 24 h. The product was washed, dried, and annealed at 400 °C and 600 °C.
5:Data Analysis Methods:
XRD for crystallinity and phase detection, FTIR for bonding mechanism, FESEM and HRTEM for morphology and structure, BET for surface area, Raman spectroscopy for material chemistry, XPS for oxidation states and defects, UV–Vis for optical properties, and VSM for magnetic properties.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容-
Rigaku Ultima-IV powder X-ray diffractometer
Ultima-IV
Rigaku
Used for ascertaining the phase purity of synthesized samples.
-
Perkin Elmer Frontier FTIR spectrophotometer
Frontier
Perkin Elmer
Used for gaining insight into the bonding mechanism associated with samples.
-
HRTEM
Tecnai G2 20 (FEI)
FEI
Used for examining the morphology and structure of samples.
-
XPS
PHI 5000 Versa Prob II
FEI Inc.
Used for analyzing the composition of the obtained product.
-
UV–Vis spectrophotometer
SHIMDZU UV-2450
SHIMDZU
Used for measuring the optical absorption spectra.
-
vibrating sample magnetometer
Lakshore Model 7400
Lakshore
Used for performing magnetic measurements at room temperature.
-
FESEM
Nova Nano FE-SEM 450
Used for examining the morphology and structure of samples.
-
Quantachrome AsiQwin
AsiQwin version 3.0
Quantachrome
Used for evaluating the BET surface area.
-
confocal micro-Raman spectrometer
VoyageTM BW5435-532SY
BW& Tek
Used for obtaining Raman spectra at room temperature.
-
登录查看剩余7件设备及参数对照表
查看全部