研究目的
To characterize photonic waveguides over more than an octave of wavelength using a novel spectroscopic technique called mode-crossing spectroscopy.
研究成果
Mode-crossing spectroscopy is a powerful new in situ technique for ultrabroadband characterization of photonic waveguides, enabling the determination of core refractive index with an error of ±0.5%, waveguide width variation to an accuracy of less than 5 nm, and propagation losses within an error of ±0.5 dB/cm.
研究不足
The technique requires multimode, rectangular waveguides to observe the mode crossings, and the lowest propagation loss measurable is limited by the length of the fabricated waveguides.
1:Experimental Design and Method Selection:
The technique uses a broadband source and a spectrometer coupled to the input and output ends of a series of straight dielectric waveguides via single-mode optical fibers.
2:Sample Selection and Data Sources:
Measurements are made on waveguides of varying widths and lengths to determine the refractive index of the core and waveguide width variation.
3:List of Experimental Equipment and Materials:
A broadband tungsten-filament light source, polarization-maintaining single-mode optical fibers, lensed fibers, and spectrometers with InGaAs and silicon detectors.
4:Experimental Procedures and Operational Workflow:
Light is coupled into the test device and collected at the output for spectral analysis. Transmission spectra are acquired and normalized to a background spectrum.
5:Data Analysis Methods:
The wavelengths at which multiple modes are degenerate are measured to determine the refractive index and waveguide width variation. Mode-dependent losses are analyzed from 700 nm to 1550 nm.
独家科研数据包,助您复现前沿成果,加速创新突破
获取完整内容