研究目的
To demonstrate that photovoltaic power plants (PVPPs) can provide effectively different types of frequency support based on a power reserve and an offline maximum power point tracking (MPPT) technique, and to propose an innovative method to de-load the PVPP without significantly increasing the MPPT complexity.
研究成果
The study concludes that a PVPP can adequately compensate for the reduction in inertia caused by the increase in converter connected generation, given the proper power reserve. The proposed droop and combined droop+inertia support controls result in a slower rate-of-change-of-frequency (ROCOF) as the PV penetration increases. The best response is obtained by releasing as much power as possible immediately after the increase in load, similar to the fast frequency response (FFR), but this uses up the power reserve and reduces the ability of the system to participate in subsequent frequency events. A variable droop method is proposed to overcome this drawback.
研究不足
The main disadvantage of the MPPT method used in this paper is that the calculated maximum power will become less accurate over time. Additionally, the performance and level of support the PVPP can provide is influenced by the amount of reserve power available.