摘要： Micro-scribing experiments were conducted to investigate the characteristics of the associated ablative behavior and the improvements to the magnetic properties of grain-oriented steel using both a 532 nm and a 1064 nm wavelength ultra-fast picosecond laser. Ablative morphological characteristic analysis and elemental analysis were carried out using a 3D confocal microscope, a scanning electron microscope, and energy-dispersive spectroscopy. The damage mechanisms were analyzed by comparing the ablation morphologies. Furthermore, an iron loss tester and magnetic domain observation instrument were used to analyze the dynamic hysteresis loop, macroscopic magnetic property parameters, and to observe the microscopic structure of the magnetic domains. The magnetization behavior, loop characteristics, and magnetic domain refinement mechanisms were discussed. The results indicated that the magnetic domains were clearly refined and that the magnetic properties were significantly improved after picosecond laser scribing of the grain-oriented steel. The sample scribed using an ultra-fast wavelength 532 nm laser was more effectively scribed: the magnetic domain was slightly more refined, the iron loss was reduced by 15.73%, the coercivity was reduced by 24.42%, the residual magnetism was reduced by 20.8%, and the relative permeability was increased by 10.3%. The surface was of a high quality, but there were traces of stress damage caused by high-pressure steam in the scribed area. The 1064 nm wavelength ultra-fast laser clearly showed the effects of heat accumulation in the scribed area. Defects due to thermal damage were more common. The improvement to the macroscopic magnetic properties depended largely on the surface quality of the scribing and the penetration depth of the residual stress in the sample.